MEAN WELL SUS01 Series 1W DC-DC Unregulated Single Output Converter Owner’s Manual
- June 13, 2024
- MEAN WELL
Table of Contents
1W DC-DC Unregulated Single Output Converter
SUS01 series
Features:
- 1000VDC I/O isolation
- Internal SMD technology
- Built-in EMI filter
- Cooling by free air convection
- Non-conductive plastic case
- Dual in line package
- 100% burn-in test
- Low cost / High reliability
- Approvals: FCC /EAC/CE/UKCA
- 2 years warranty
SELECTION GUIDE
ORDER NO.| SUSO1L-05| SUSO1M-05| SUSO1N-05| SUS010-05| SUSO1L-09| SUSO1M-09|
SUSO1N-09| SUS010-09
---|---|---|---|---|---|---|---|---
| DC OUTPUT VOLTAGE| 5V| 9V
OUTPUT CURRENT RANGE| 0 – 200mA| 0 – 111mA
EFFICIENCY| 73%| 74%| 72%| 74%| 75%| 79%| 80%| 77%
ORDER NO.| SUSO1L-12| SUSO1M-12| SUSO1N-12| SUS010-12| SUSO1L-15| SUSO1M-15|
SUSO1N-15| SUS010-15
---|---|---|---|---|---|---|---|---
| DC OUTPUT VOLTAGE| 12V| 15V
OUTPUT CURRENT RANGE| 0 – 84mA| 0 – 67mA
EFFICIENCY| 78% I82% I83%| 83%| 79% 182%| 83%| 83%
SPECIFICATION
| OUTPUT | RATED POWER | 1W |
|---|---|---|
| RIPPLE & NOISE (max.) Note.2 | 100mVp-p | |
| LINE REGULATION Note.3 | ±1.2% for 1% input variation | |
| LOAD REGULATION Note.4 | ±8.0% | |
| VOLTAGE ACCURACY | ±2.0% | |
| SWITCHING FREQUENCY | 50KHz min. | |
| INPUT | VOLTAGE RANGE | 4.5 – 5.5V |
| – 5.5V | 10.8 -13.2V | 21.6 – 26.4V |
| NORMAL VOLTAGE | 5V | 12V |
| INPUT CURRENT | Full load | 280mA |
| No load | 21mA | 11mA |
| FILTER | Capacitor type | |
| PROTECTION | Fuse recommended | |
| PROTECTION | OVERLOAD | Momentary |
Protection type : Broken
SHORT CIRCUIT
Momentary|
Protection type : Broken
ENVIRONMENT| WORKING TEMP.| -25 – +71 c (Refer to “Derating Curve”)
WORKING HUMIDITY| 20% – 90% RH non-condensing
STORAGE TEMP., HUMIDITY| -25 – +105 c , 10 – 95% RH
TEMP. COEFFICIENT| ±0.03% / t (0 – 50’C)
VIBRATION| 10 – 500Hz, 2G 10min./1 cycle, period for 60min. each along X, Y, Z
axes
SAFETY & EMC| SAFETY STANDARDS| EAC TP TC 020/2011 approved
WITHSTAND VOLTAGE| 1113-0/P:1.5KVOC
ISOLATION RESISTANCE| IIP-0/P: 100M Ohms / 500VDC/ 25°C/ 70% RH
ISOLATION CAPACITANCE| 80pF max.
EMC EMISSION| Compliance to BS EN/EN55032 Class B, FCC part 15 Class B, EAC TP
TC 020
EMC IMMUNITY| Compliance to BS EN/EN61000-4-2,3,4,5,6,8, light industry level,
criteria A, EAC TP TC 020
OTHERS| MTBF| 700khrs min. MIL-HDBK-217F(25°C)
DIMENSION| 22.6’9.91.9mm or 0.89’1’0.39’1’0.35′ inch (L’W*H)
WEIGHT| 3.1g
Mechanical Specification
Pin Configuration
| Pin No. | Output |
|---|---|
| 1 & 16 | +Vin |
| 6 & 11 | -Vout |
| 7 & 10 | +Vout |
| 8 & 9 | -Vin |
Derating Curve
NOTE
- All parameters are specified at normal input, rated load, 25’C 70% RH ambient.
- Ripple & noise are measured at 20MHz by using a 12” twisted pair terminated with a O.1uf & 47uf capacitor.
- Line regulation is measured from low line to high line at rated load.
- Load regulation is measured from 20% to 100% rated load.
Product Liability Disclaimer : For detailed information, please refer to https://vww.meanwell.com/serviceDisclaimer.aspx
File Name: SUS01-SPEC 2022-03-16
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>