Razor W15128785028 Rambler 16 Kick Stand Instruction Manual
- June 3, 2024
- Razor
Table of Contents
Razor W15128785028 Rambler 16 Kick Stand
Required Tool
- A. 6 mm Allen wrench
WARNING
CAUTION: To avoid potential shock or another injury, turn the power switch OFF and disconnect the charger before conducting any assembly or maintenance procedures. Failure to follow these steps in the correct order may cause irreparable damage.
INSTALLATION
- Using a 6 mm Allen wrench, loosen and remove the bolt that holds the kickstand onto the frame and remove the kickstand.
- Reverse the steps.
ATTENTION: Charge battery 12 hours before using.
Need Help?
Visit our website at www.razor.com or call toll-free
at 866-467-2967
Monday – Friday 8:00am – 5:00pm Pacific Time.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>