PROAIM VI-PP-02 Pro Vibration Isolator for Camera Gimbals Instruction Manual
- June 5, 2024
- PROAIM
Table of Contents
PROAIM VI-PP-02 Pro Vibration Isolator for Camera Gimbals
What’s In The Box
Please inspect the contents of your shipped package to ensure you have received everything that is listed below.
Vibration Isolator Setup
Begin by taking out the mainframe from the case.
- Attach DJI-QR Ronin plate with top plate of Vibration Isolator with the provided screws & allen
NOTE: Attach Isolator with Proaim Airwave Vibration Isolator Arm then secure with provided screws
- Loosen the side lock lever & insert your gimbal then again lock the lever to secure it. If ronin plate look loose then tighten the side allen
NOTE: The isolator can be fixed both Over Slung and Under Slung, as per your requirement
NOTE: Vibration Isolator can also be customized with different payloads for using with lightweight set-ups from 15-30kg / 33-66lb.
-
Loosen allen bolts on top Plate with the help of allen key and remove the plate. Your equipment will look as shown in image.
-
Loosen all allen bolts with help of provided allen key as shown in
-
Remove the Passive Plate from the Frame as shown in the
Turn the Isolator upside-down & loosen the bolts to remove Square-O-Rings from the Isolator
- Now reduce the rings set in center of the Vibration Isolator as per your payload requirement. Then similarly follow the back steps to assemble the Vibration
- There are many different holes at the topand bottom side of vibration isolator plate to mount different
- 1/4”-20 hole is for DJI-QR Ronin Plate
- M4 or M3 hole is for MOVI Mount
Be sure to mount your Gimbal Camera Setup securely.
YOUR PROAIM PRO CAMERA VIBRATION ISOLATOR ALL DRESSED UP AND READY TO GO!
(SHOWN WITH OPTIONAL ACCESSORIES)
**Warranty**
We offer one year warranty for our products from date of purchase. Within this period of time, we will repair it without charge for labor or parts. Warranty doesn’t cover transportation costs nor does it cover a product subjected to misuse or accidental damage. Warranty repairs are subjected to inspection and evaluation by us.
Liability: We are not liable for damage caused by products that we do not supply or from mishandling in transit, accident, misuse, neglect, lack of care of the product, or service by anyone other than our company.
Contact Us: In case of any kind of dissatisfaction, please Contact us immediately and we promise our utmost support and care until you use our product.