RONIS Tronic Plus Electronic Lock Instructions

RONIS Tronic Plus Electronic Lock

Keep the manual accessible
These instructions form an integral part of the furniture lock.

• Keep these instructions with the furniture lock.
• Ensure that the instructions are available for the assembly fitter / operator.
• Please include these instructions if you sell the furniture lock or pass it on.

Important safety information

The furniture lock is built in accordance with recognised safety regulations. When working with and on the furniture lock, however, residual risks that can cause danger to life and limb remain. The following safety notices must therefore be observed and followed.

Safety

Avoid risk of explosion
The furniture lock is not suitable for use in areas where there is a risk of ex-plosion. Assembling and operating the furniture lock in an area where there is a risk of explosion can lead to serious injury or death.
Only assemble and operate the locks in areas where there is no explosive atmosphere.

Choking risk
Children can become injured after swallowing small parts.
Make sure that small parts e.g. locking media or screws are kept out of the reach of children.

Avoid property damage and malfunction
Property damage can occur as a result of incorrect storage for an extended period of time.
Store the furniture lock and its components in the original packaging in a dry and dust-free place.

Property damage can occur
as a result of the furniture lock being assembled and operated incorrectly.

• Read these instructions carefully before assembling the furniture lock and putting it into operation.
• Follow the instructions step by step.
• Never touch the furniture lock’s electronic components.
• Protect the parts of the furniture lock against moisture.
• Handle the furniture lock carefully to prevent scratches.
• Secure the screws using the specified torque.

Risk of property damage as a result of incorrect cleaning and maintenance.

• Do not lubricate any parts of the furniture lock.
• Clean the housings and closing devices with a soft, damp cloth; do not use any cleaning agents.

Appropriate user training

• People working on and with the furniture lock must have basic manual skills so that they can safely make screw connections and drill holes if necessary.
• Installers of the furniture lock must understand how it works and how the individual components interact.

INSTRUCTIONS

Multiuser mode

Open and close by 4-digit code. The code is erased every time the lock is opened, being available for a new use.

Single User mode

Change the User code

1. Press Enter for 3 seconds.
2. Introduce Current code and press enter.
3. Introduce New code and press enter.

Open using Master code: Inspection mode/Delete User code

I NSPECTION MODE
Introduce the 5 digit Master code and press enter. Close the lock by pressing enter before 30s. The User code is not deleted.

DELETE USER CODE
Introduce Master code and press enter. After 30s the lock remains opened. The User code has been deleted and a new User code will be required to close the lock again.

Change the Master code

1. Press Enter during 3 seconds.
2. Introduce Current master code and press Enter.
3. Introduce New master code and press Enter.

Batteries replacement

IMPORTANT:
The batteries replacement must be done in less than 5 minutes. The BATPACK must remain connected during the release of the batteries (otherwise the clock will loose the programmed time).

Measurements

• IP (keypad / lock case: —-/45
• Working temperature: -5ºC <> +70ºC
• Latch force: 45Kgf
• UV Rays: 10000h
• Vibration: 10 – 200 Hz 2g
• Life test: 200000 cycles
• Electrostatic discharge: 8000 V
• Battery life: 90000 cycles 0 three years

WARRANTY AND WARNINGS

Warranty and liability

Our General Terms and Conditions apply as a matter of principle. Warranty and liability claims that are made if personal injury or property damage occurs are always excluded if they are attributable to one or more of the following causes:

• Improper use of the furniture lock
• Failure to observe the notices in these instructions
• Improperly performed assembly
• Improperly performed repairs
• Disasters caused by external influences and force majeure.

Copyright

This documentation may not be reproduced either in whole or in part, stored or transmitted, disclosed or translated in any form or by any means without the prior written consent of DOM Security.
This documentation is updated at regular intervals. The publisher is always grateful to receive information about any errors or suggestions regarding
this documentation.
© DOM Security, 20, rue de l’Arc de Triomphe, 75017 Paris, France

Documentation Officer

DOM Security
Product Management Department 20, rue de l’Arc de Triomphe 75017 Paris, France

Information available online

You can download these instructions and other information about the Tronic family on the product details page at the following web address: www.dom- security.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>