WAC LIGHTING WTK-1014 Exterminator II LED Track Luminaires Instruction Manual

June 13, 2024
WAC LIGHTING

WAC LIGHTING WTK-1014 Exterminator II LED Track Luminaires

WARNING

IMPORTANT: NEVER attempt any work without shutting off the electricity.

  • Read all instructions before installing.
  • System is intended for installation by a qualified electrician in accordance with the National Electrical Code and local regulations.
  • Go to the main fuse box, or circuit breaker. Place the main power switch in the “OFF” position and unscrew the fuse(s) or switch ”OFF” the circuit breaker switch(es) that control the power to the fixture or room that you are working on.
  • Place the wall switch in the “OFF” position.

Overview:

Fixtures are designed for use on WAC Lighting’s track systems. They may also be used on other manufacturer’s brand of track (consult factory for compatibility).

LED TRACK LUMINAIRE TRACK SYSTEM
WTK-1014/WTK-1023/WTK-1035/WTK-1052 Series WTK 120V W Track
WHK-1035/WHK-1023/WHK-1052 Series WHK 277V W Track

Installing on Track

  1. Turn the lock switch to the unlock position. Turn the circuit selecting handle to the power off position. (Fig 1)

  2. Make sure the convexity on the adaptor box is at the same side with the slot on the track (Fig 2).
    Fit the adaptor box into the track. Ensure the convexity on the adaptor box is at the same side with the slot on the track.

  3. Turn the lock switch to the lock position. Turn the circuit selecting handle to 1 or 2 to switch the power on.

FIXTURE POSITIONING:

  1. Rotate the luminaire’s body horizontally or vertically to aim it properly.
    The fixture can rotate ±90°vertically and 360 °horizontally.
    Installing on Track

ACCESSORIES (Fig.5)

  1. Use a screw-driver loosen the two screws at the back of the fixture body.
  2. Take out the front frame, then change the lens.
  3. To install cross louver or snoot, use the clips around the front frame to fasten them directly

Accessories \(Fig.5\)

Aligning the Reflector (Fig. 6)

Before putting the accessory assembly back to the fixture, make sure to align the reflector properly as shown in Fig. 6.

Aligning the Reflector \(Fig. 6\)

Aligning the Reflector \(Fig. 6\)

Aligning the Reflector \(Fig. 6\)

Customer Support

WAC Lighting
www.waclighting.com
Phone (800) 526.2588 • Fax (800) 526.2585
Headquarters/Eastern Distribution Center
44 Harbor Park Drive • Port Washington, NY 11050
Phone (516) 515.5000 • Fax (516) 515.5050
Western Distribution Center
1750 Archibald Ave • Ontario, CA 91761
Phone (800) 526.2588 • Fax (800) 526.2585

WAC Lighting retains the right to modify the design of our products at any time as part of the company’s continuous improvement program. JUNE 2022 3

WAC-Logo

Documents / Resources

| WAC LIGHTING WTK-1014 Exterminator II LED Track Luminaires [pdf] Instruction Manual
WTK-1014, WTK-1023, WTK-1035, WTK-1052, WHK-1035, WHK-1023, WHK-1052, WTK-1014 Exterminator II LED Track Luminaires, WTK-1014, Exterminator II LED Track Luminaires, II LED Track Luminaires, LED Track Luminaires, Track Luminaires, Luminaires
---|---

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

WAC LIGHTING User Manuals

Related Manuals