Rollei 100 / 200 Flexible Solar Panel User Manual

: June 10, 2024
: Rollei

Rollei 100 200 Flexible Solar Panel

Rollei 100 200 Flexible Solar Panel product

Product Information

The Rollei Solar Panel 100/200 is a portable solar panel that can be used to charge devices using solar power. The Solar Panel 100 has a peak performance of 100 watts, while the Solar Panel 200 has a peak performance of 200 watts. The panels are designed for outdoor use and are equipped with an MC4 cable, a stand, and an MC4 to DC cable for easy connection to devices. The panels can be placed in direct sunlight to efficiently charge devices.

Technical Data

Solar Panel 100:
- Peak performance: 100.0 W
- Cell efficiency
- Mains voltage: 18.0 V
- Current: 5.4 A
- Open circuit voltage: 22.4 V
- Short-circuit voltage: 6.0 A
- Dimensions (LxWxH): 65 x 51 x 3 cm (folded), 122 x 65 x 1 cm (unfolded)
- Weight: 3.6 kg
Solar Panel 200:
- Peak performance: 200.0 W
- Cell efficiency
- Mains voltage: 18.0 V
- Current: 11.0 A
- Open circuit voltage: 22.4 V
- Short-circuit voltage: 12.0 A
- Dimensions (LxWxH): 65 x 51 x 3 cm (folded), 223 x 65 x 1 cm (unfolded)
- Weight: 6.3 kg

Product Usage

Before using the Rollei Solar Panel for the first time, read the operating instructions and safety instructions carefully. Keep the operating instructions together with the solar panel for later use.
If other people use this solar panel, make the manual available to them. If you sell the solar panel, the manual is part of the solar panel and must be supplied with it.

Placement of the Solar Panel

Place the Solar Panel in direct sunlight to efficiently charge devices. Use the stand provided to place the Solar Panel in an upright position facing the sun for optimal charging. Rollei 100 200 Flexible Solar Panel
3

Cable Connections

Connect the MC4 cable to the Solar Panel and connect the MC4 to DC cable to the device being charged. Ensure that the positive and negative poles are correctly connected to avoid damage to the device being charged.

Parallel Use

The Solar Panels can be used in parallel to increase the charging capacity. Connect the MC4 cables of each Solar Panel in parallel and connect the MC4 to DC cables to the devices being charged. Ensure that the positive and negative poles are correctly connected to avoid damage to the devices being charged.

Disposal

Dispose of the Solar Panel in accordance with local regulations for electronic waste disposal.

Before the First Use

Read the operating instructions and safety instructions carefully before using the appliance for the first time.
Keep the operating instructions together with the appliance for later use. If other people use this appliance, make this manual available to them. If you sell the appliance, this manual is part of the appliance and must be supplied with it.

Intended Use

This product is only intended for charging suitable power stations and is designed for private use only.
Use the product only in dry weather conditions.
Use the solar panel only as described in this user manual. Any other use is considered improper and may result in property damage.
The manufacturer or dealer accepts no liability for damage caused by improper or incorrect use.

Explanation of Symbols
The following symbols are used in this manual, on the Quadro copter or on the packaging.
Products marked with this symbol comply with all relevant Community regulations of the European Economic Area.

Safety Instructions

Do not bend the foldable solar panel.
Do not place the foldable solar panel in shady areas. Avoid tree shade, buildings and other obstacles.
Do not immerse the solar panel in water or other liquids.
Do not clean the solar panel with water, but wipe it gently with a damp cloth.
Do not use or store the solar panel near open flames or combustible materials.
Do not place the solar panel in a fire or expose it to direct heat.
Do not scratch the surface of the solar panel with sharp objects.
Prevent corrosive substances from damaging the solar panel.
Do not step on the solar panel or place heavy objects on it.
Do not disassemble the solar panel.
The solar panel must be correctly connected to the unit.
Do not short-circuit the positive and negative terminals.
Do not cause a short circuit when connecting the positive and negative poles.
Make sure that there is no gap between the plug and the insulated connector. If there is a gap, sparks or electric shocks will occur.
Check the connection status of each component, including cables, wires and plugs.

What‘s in the Box

Solar Panel 100 or Solar Panel 200 with integrated MC4 cable (3 m)
1.5 m MC4 / DC cable

Components

Solar Panel
MC4 cable
Stand
MC4 to DC cable

Connection

Attention! Make sure to connect the panel first before setting it up.
Make sure the connection of the MC4 and the MC4 to DC cable is correct and tight, positive pole to positive pole and negative pole to negative pole.
Position the power station in a shady and cool place during charging.

Wiring

Keep the connections dry and clean and check that the cables are firmly connected.
Do not connect the cables to wet or dirty connections.
Check the fit and locking connections of the cables every 6 months.

Use

With an MC4-Y connector it is possible to use several panels at the same time.
Caution: In order to obtain the highest possible efficiency of energy yield, it is recommended to couple only panels with the same technical requirements.
You can connect different panels either in series or in parallel.
With a series connection, the voltages of the units add up and the amperes remain the same.
With a parallel connection, the amperes add up and the volts remain the same.

Technical Data

Solar Panel 100

Peak performance| 100 .0 W
Cell efficiency| 19 – 22%
Mains voltage| 18 .0 V
Current| 5 .4 A
Open circuit voltage| 22 .4 V
Short-circuit voltage| 6 .0 A
Operating temperature range| -20° – 60° C
Dimensions (LxWxH)| 65 x 51 x 3 cm (folded)
122 x 65 x 1 cm (unfolded)
Weight| 3 .6 kg
Solar Panel 200

Design and specifications are subject to change without notice.

Disposal

Dispose of the packaging correctly.
Use the local possibilities for collecting paper, cardboard and light packaging (applicable in the European Union and other European countries with systems for the separate collection of recyclable materials).
Appliances marked with this symbol must not be disposed of with household waste!
You are legally obliged to dispose of old appliances separately from household waste. Information on collection points that accept old appliances free of charge can be obtained from your community or municipal administration.

Declaration of Conformity

Rollei GmbH & Co. KG hereby declares that the devices ”Rollei Solar Panel 100“ and ”Rollei Solar Panel 200“ comply with Directive 2014/53/EU.
2014/35/EU Low Voltage Directive
2011/65/EU RoHS Directive
2009/125/EC ERP Directive
The full text of the EU Declaration of Conformity is available at the following web address: www.rollei.com/egk/SolarPanel100&200
Rollei GmbH & Co. KG
Rollei GmbH & Co. KG In de Tarpen 42
D-22848 Norderstedt
Service-Hotline: +49 40 270750277
Item No.: