kogan OVWILLWBDNA William Wood Bed User Guide
- June 4, 2024
- Kogan
Table of Contents
kogan OVWILLWBDNA William Wood Bed
COMPONENTS
Hardware
ASSEMBLY
Align one part labelled 3 level with parts labelled 1 and 2. Using the Allen
key (H), secure the part labelled 3 to parts labelled 1 and 2 with 50mm M6
screws (A).
Repeat this process with the remaining parts labelled 1, 2 and 3. This will
create two end assemblies.
Note: Do not use power tools to assemble this bed as it may damage the components.
Align the holes on one bracket (G) with those on one end assembly. Using a
Phillips screwdriver (not supplied), secure 16mm M4 screws (E) through.
Repeat this process with the remaining end assembly.
Align one each of the parts labelled 4 and 5 with one part labelled 6. Using
the Allen key (H), secure the pieces (4, 5, 6) together with 35mm M6 screws
(B).
Repeat this process with the remaining parts labelled 4, 5 and 6. This will
create two side assemblies.
Connect the holes on the side assemblies to those on the end assemblies using the dowels (C).
Using the Allen key (H), secure each corner of the side and end assemblies with 50mm M6 screws (A).
Align the holes on parts labelled 7 with parts 8 and 9 as shown below. Using the Allen key (H), secure 60mm M7 screws (F) through. This creates the middle assembly.
Using a Phillips screwdriver (not supplied), secure the middle assembly to the end assemblies with 16mm M4 screws (E).
Using a Phillips screwdriver (not supplied), secure parts labelled 10 onto the bed with 30mm M4 screws (D).
Assembly complete.
- **** We hope that this user guide has given you the assistance needed for a simple set-up.
- For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com
- kugan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>