maquira Polyester Abrasive Strips Instructions
- June 13, 2024
- maquira
Table of Contents
**maquira Polyester Abrasive Strips
**
PRESENTATION:
Packaging with 100 strips of 2,0 ; 4,0 or 6,0 mm;
Packaging with 150 strips of 2,0 ; 4,0 or 6,0 mm.
DESCRIPTION:
The Polyester Abrasive Strips Airon aims at finishing and polishing of dental restorations. The functioning of the polyester sandpaper strip is mechanical, i.e. because it is composed of an abrasive material that when rubbing against the restored tooth surface, promotes abrasion / wear and polishing of the tooth region.
INDICATION:
Finish and polishing of proximal surfaces of restorations in composite resin.
COMPOSITION:
Polyester and aluminum oxide.
DIRECTIONS OF USE:
- Carefully insert the strip in the interproximal tooth region through the neutral center and promote the proximal surface finish and polishing by moving the medium-grained and then with fine-grained sandpaper.
- Then remove the sandpaper from the interproximal space through the neutral center. Can be used in composite resins.
WARNING AND PRECAUTIONS:
The use is restricted to professionals specialized in dentistry, according to
local legislation and with specific training for its handling.
Procedures provided in the directions of use should be strictly followed.
Handle the product carefully in order to avoid further injuries to soft
tissues in the oral cavity of the patient.
Product of single use should be discarded after use.
Do not use the product after the term of validity.
Keep away from the reach of children.
CONTRAINDICATIONS AND SIDE EFFECTS:
Do not use in patients with sensitivity to any of its components.
STORAGE:
Store in a clean place away from direct sunlight. Temperature between 3 ºC and 50 ºC and humidity up to 75 UR.
TRANSPORT:
Transport the product in well-sealed tertiary packaging, away from sources of heat and humidity. Store at temperature up to 50 ºC and humidity up to 75 UR.
DISPOSAL:
The product should be disposed of, according to current legislation of its country.
Symbology
- Keep dry.
- Manufacturer.
- Catalogue number.
- Batch code.
- Keep away from sunlight.
- Use-by date.
- Consult instructions for use for important preventive information.
- Consult instructions for use.
- Do not re-use.
- Temperature limit.
Customer Support
Manufacturer:
Odontológicos S.A.
CNPJ: 05.823.205/0001-90
Address:
Av. Melvin Jones, 773
Pq. Ind. Bandeirantes
Maringá – PR | 87070-030 | Brasil
Resp. Técnico | Technical Resp.:
Cristiane Furlan | CRF-PR: 14.038
Reg. ANVISA N°: 80322400058
SAP:
Customer service
0800 726 5848
[email protected]