maquira Bond 2.1 Latinden Universal Adhesive Instructions
- June 13, 2024
- maquira
Table of Contents
Bond 2.1 Latinden Universal Adhesive
Instructions
Bond 2.1 Latinden Universal Adhesive
Symbology
| Manufacturer.
---|---
| Catalogue Number.
| Batch code.
| Keep dry.
| Keep away from sunlight.
| Use-by date.
| Consult instructions for use.
PRESENTATION:
Vial with 4 mL, 5 mL, 6 mL.
INDICATION:
It has the function of filling in the irregularities of the surfaces and allowing for the bond between the enamel and the restorative materials like, for example, compound resin and resinous cements.
DESCRIPTION OF THE PRODUCT:
The Bond 2.1 product incorporates two components, a primer and an adhesive
agent, in a single vial, simplifying the clinical procedures, with excellent
results in terms of adhesion forces.
However, these easy-to-use and quick application systems require acid
conditioning and multiple applications of adhesive to obtain a maximum
adhesion to the enamel and the dentin.
COMPOSITION:
Methacrylic monomers, photoinitiator, ethanol, inert load.
MODE OF USE:
1. Perform the complete conditioning with phosphoric acid at 37% for 30
seconds on enamel and 15 seconds on dentin. Wash the area and then dry.
Take care not to dehydrate the dentin when drying with air. The site should
remain slightly moist. 2. Apply a fine layer of Bond 2.1 with the aid of a
brush or burnisher. Apply a jet of air and polymerize for 20 seconds. Repeat
the application if the surface is not smooth and shiny. 3. The site is
prepared to receive the restorative material.
4. Perform the finishing of the restoration.
PRECAUTIONS:
For exclusive use by dental surgeon.
Close the vial immediately after use.
Products such as eugenol or clove oil inhibit polymerization.
Do not use the product if the validity has expired.
Keep out of the reach of children.
STORAGE AND TRANSPORTATION CONDITIONS:
Store the vial in a cool, dry location protected from dust, avoiding heat, sunlight, and other sources of direct light. Do not store near materials that have eugenol or clove oil in their composition.
MADE IN BRAZIL
Manufacturer:
Odontoldgicos S.A.
CNPJ: 05.823.205/0001-90
Address:
Av. Melvin Jones, 773 | Pq. Ind. Bandeirantes
Maringa – PR | 87070-030 | Brasil
Technical Resp.:
Cristiane Furlan | CRF-PR: 14.038
Reg. ANVISA N°: 80322400085
SAP:
Customer service:
0800 726 5848
sap@maquira.com.br
0403041-rev.07
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>