amazfit A2324 Smart Watch Instruction Manual

: September 18, 2024
: Amazfit

Table of Contents

A2324 Smart Watch
Pairing the Watch
Basic Parameters
Battery Safety
Troubleshooting
Warranty and Return Policy
Regulatory Notice
Documents / Resources

AMAZFIT BIP 5 UNITY

A2324 Smart Watch

Pairing the Watch

Zepp is a must-have app for this watch. It provides scientific sleep and workout guidance and personalized health services to help you start a healthy lifestyle.

Use your mobile phone to scan the QR code on the right side to download and install the app, or search for the app in the Google Play Store or AppleApp Store and then download and install the the latest version of the app.
Open the app, register an account and log in.
Pair the watch as prompted by the app.

https://api-watch.huami.com/forwarding/watchUS

Note:

For better user experience, please use the most recent version of the app.
The operating system needs to be Android 7.0, iOS 14.0, or above.
Do not pair the watch directly using your mobile phone’s Bluetooth.

Follow the steps in the app to pair your watch correctly.

Basic Parameters

Product Name: Smart Watch
Input: DC 5 V 500 mA MAX
Bluetooth output power: <12 dBm
Water resistance rating: IP68
Product model: A2324
Bluetooth version: V5.2
Operating temperature: 0°C to 45°C
Bluetooth frequency: 2402–2480 MHz
View product certification information on the watch’s Settings > System > Regulatory page.
Package Contents: Smartwatch with the band, Charging base, Instruction manual.
Please refer to the watch user interface to see the software version.
Device requirements: Devices installed with Android 7.0 or iOS 14.0 or above OS versions.

Battery Safety

This device is equipped with a built-in battery that cannot be removed or replaced. Do not disassemble or modify the battery by yourself.
Disposal of a battery into fire or a hot oven, or mechanically crushing or cutting of a battery, that can result in an explosion.
Leaving a battery in an extremely high temperature surrounding environment can result in an explosion or the leakage of flammable liquid or gas.
A battery subjected to extremely low air pressure may result in an explosion or the leakage of flammable liquid or gas.
Do not use unauthorized or incompatible power adapters or data cables, which may damage the watch and accessories, or cause fire, explosion, or other hazards.

Troubleshooting

Please check the FAQ on the website: https://support.amazfit.com/en.

Note:

This product isn’t a medical device. None of the data or measurements are intended for medical diagnosis or medical monitoring.
If the product is not in use for a long period of time, it is recommended that you power off the product before storing it. Recharge the battery every 6 months to 100% to prevent battery damage by over discharge due to long-term storage.
Do not wear your watch during bathing, swimming, snorkeling, showers, hot springs, saunas (steam rooms), diving, underwater diving, water skiing, and other activities involving water currents.
For more information about safety precautions, repair, and maintenance, please refer to the electronic manual.

Warranty and Return Policy

The Amazfit Limited Warranty covers Amazfit products against manufacturing defects beginning on the original purchase date. The warranty period is 12 months or another specified period as the applicable consumer laws in the consumer’s country of purchase require. Our warranty is in addition to rights provided by applicable consumer laws.
Official website: en.amazfit.com
Support: support.amazfit.com/en

Regulatory Notice

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC ID: 2AC8UA2324
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

This equipment has been tested and meets applicable limits for radio frequency (RF) exposure. SAR limits depend on whether this equipment is used against the head or on the wrist.
The FCC SAR limit for extremity SAR is 4.0W/kg (10g). The highest SAR value reported under this this standard during product certification when properly Limb worn (0mm) on the extremity SAR is 0.10W/kg.
*Tests for SAR are conducted using standard operating positions accepted by the FCC with the device transmitting at its highest certified power level in all tested frequency bands.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposurecondition without restriction.
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:

This device may not cause interference.
This device must accept any interference, including interference that may cause undesired operation of the device.

IC: 21806-A2324
CAN ICES-003 (B)/NMB-003(B)
Exposure of humans to RF fields (RSS-102)
The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the RSS with the device transmitting at its highest certified power level in all tested frequency band without distance attaching away from the body. The measured value is 0,10W/kg.

Manufactured by: AnHui Huami Information Technology Co., Ltd.
Address: See Packaging

12.005.0004.07109-V3.0-FX