FUNOVATION 2K Battery Powered Pan and Tlit Camera User Guide
- June 14, 2024
- FUNOVATION
Table of Contents
Battery Powered Pan & Tilt Camera
Quick Start Guide
www.funovation.store
Hong Kong Funovation Smart Co., Limited
info@funovation.store
Packing list
Product structure -Front
Content Description
The red light is normally on : The camera is on or the internet has problem
The red light flickers: Wait for wifi connection (flicker slowly)
Connected WiFi (flicker quickly)
The blue light flickers: The camera is connecting to network
The blue light is normally on : The camera is on line and the user can view
the video
Product structure -Back
Content Description
RESET: Press “Reset” for about 3-5s to restore the factory default.
TF card slot: Support TF card local storage (Maximum support 128G), please
format the TF card in the” Cloud Edge” APP for the first time using
Charging Indicator:
The red light is normally on, the camera is charging
The blue light is normally on, the camera is fully charged
Download the App
Scan the below QR code or search the “CloudEdge” in the APP store or google play, then download and install the APP.
iOS APP Download
https://apps.apple.com/app/cloudedge/id1294635090
Android APP Download
https://play.google.com/store/apps/details?id=com.cloudedge.smarteye
User sign up, log in
- Sign Up: Select your country to register an account with your email.
- Log in: Select your country, enter the existing account and password to log in.
Add the camera
Make sure the wifi for phone connection is 2.4G and in the good network
condition (SG Hz not supported) ,wait for the device red indicator flickers
slowly (if the device red indicator doesn’t flickers slowly,long press the”
reset” for 3-Ss until the device send out “BUGU ” sound ,wait for the device
to restart then add the camera).
Open the “Cloud Edge” APP , click”+” icon in the upper right corner to add the
camera, select “Power Plug Camera” ,then enter to the camera list screen.
Follow the app prompt click “Next”, enter wi-fi password which mobile phone
connected, then click “Next” then put the OR code face to the camera about
10to 15 cm, waiting for the camera emits “BUGU “sound ,then click “Next”, then
the APP will search the device automatically.
Function introduction
| Time of the device | Full screen preview |
|---|---|
| Sound of the device | Definition of the picture |
| Live | Cloud |
| Screenshot | History |
| Intercom | Record |
| Motion Detection | Light |
| Camera Settings | PTZ Method |
FAQ
Q: Failed to add during network configuration?
A: Please make sure your phone is connected to a router in the 2.4GHz band, and make sure that the Wi-Fi password is correct.
Q: After scan adding is still unsuccessful?
A: Restart the device or power off the device after scan adding is still unsuccessful, and then try to add it again.
Q: The device cannot preview normally?
A: Please check if the network signal is too weak, please put the camera close to the router, if still cannot preview, reset the camera and add it again.
Q: After resetting the device, why is the camera still in the device list?
A: Resetting the device only to reset the camera’s network configuration, but cannot change the configuration on the APP, to delete the camera, you must log in the APP to delete.
Q: How to switch the camera network to another router?
A: First remove and reset the device on the APP, and then configure the network for the device again through the APP.
Q: Why does the device can not recognize the TF card?
A: Please insert and remove the TF card after power off, please check if the TF card is working normally and whether it is in FAT32 format, when the mobile phone or the device is working in unstable network, the APP also will prompt that the TF card cannot be recognized.
Safety Statement
Precautions
- The applicable working temperature of this product is -20C-50C, please do not use it in an environment where the temperature is too high or too low.
- Please do not place the lens close or facing the glass, white walls, or lighting objects, in order to avoid the picture being too bright, dark, or white.
- Please make sure that the camera is installed within the good Wi-Fi signal range, and placed it as near as possible to the router and try to install it far away from metal and microwave ovens that may affect the signal.
After-Sale Service and Technical Support
- For after-sales service, please contact info@funovation.store. Describe the camera issue, and inform us of the order number, camera model, and Serial Number on the camera sticker, we will reply to you as soon as possible.
Legal notice
Symbols: Direct current (DC)
Don’t throw batteries or out of order products with the household waste
garbage). The dangerous substances that they are likely to include may harm
health or the environment. Make your retailer take back these products or use
the selective collect of garbage proposed by your city.
Hereby, Funovation declares the radio equipment type ‘Solar Cam’ is in
compliance with the Directive 2014/53/EU. The full test of the EU declaration
of conformity is available at the Internet address:
www.funovation.store
FCC
FCC Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure limits set forth for an
uncontrolled environment and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and operated in accordance with
provided instructions and the antenna(s) used for this transmitter must be
installed to provide a separation distance of at least 20 cm from all persons
and must not be co-located or operating in conjunction with any other antenna
or transmitter. End-users and Installers must be provide with antenna
installation instructions and consider removing the no-collocation statement.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any Interference received,
including interference that may cause undesired operation.
Caution!
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>