ARROW CDA-42854-P1A Pressure Injectable Lumen CVC Instruction Manual
- June 5, 2024
- Arrow
Table of Contents
ARROW CDA-42854-P1A Pressure Injectable Lumen CVC
Pressure Injectable Arrowgtard Blue Plus
Contents:
- Arrowg+ard Blue Plus@1 Four-Lumen Catheter: 8.5 Fr. (3.0 mm OD) x 16 cm, Pressure Injectable
- Spring-Wire Guide, Marked: 032″ (0.81 mm) dia. x 23-5/8″ (60 cm) (Straight Soft Tip on One End- “J” Tip on Other) with Arrow Advancer Catheter 18 Ga. x 2-1/2″ (6.35 cm) Radiopaque over 20 Ga. RW Introducer Needle Pressure Transduction Probe
- Introducer Needle: Echogenic 18 Ga. x 2-1/2″ (6.35 cm) XTW and 5 mL Arrow® Raulerson Spring-Wire Introduction Syringe
- Injection Needle: Eclipse TM2 22 Ga. x 1-1/2″ (3.81 cm) RW and 5 mL Luer-Slip Syring
- Injection Needle: Eclipse TM2 25 Ga. x 1″ (2.54 cm) RW and 3 mL Luer-Lock Syringe Syringe: 10 mL Luer-Lock
- Tissue Dilator: 10 Fr. (3.5 mm) x 10.2 cm SecondSite”M Adjustable Hub: Fastener
- Second Site TM Adjustable Hub: Catheter Clamp SharpsAway® Disposal Cup SharpsAway@ II Locking Disposal Cup
- Maximal Barrier DrapeT with 4″ fenestration Towel 1
- Needle Holder
- Forceps
- Safety Scalpel: #11
- Checklist/CLIP Sheet Sterile Procedure Sign
- Gauze Pad: 2″x2″ (5 cmx5 cm)
- gauze Pad: 4″ x 4″ (10 cm x 10 cm)
- Dressing: Tegaderm@3 10 cm x 12 cm
- Surgical Apparel: Impervious Gown
- Surgical Apparel: Bouffant Cap
- Surgical Apparel: Mask with Eye Shield
- Suture: 3-0 Silk with Curved Needle
- HemoHopper® Fluid Receptacle licensed under US Patent No. 7,329,412. 2A trademark of Becton, Dickinson and Company. 3A registered trademark of 3M Company.
Not made with natural rubber latex. Store below 25°C (77°F). Avoid excessive heat above 40°C (104°F).
Contraindications
The Arrowg+ard Blue Plus antimicrobial catheter is contraindicated for patients with known hypersensitivity to chlorhexidine, silver sulfadiazine and/or sulfa drugs.
| Distal (16 Ga.) | 0.38 | 2781 | 5 |
|---|---|---|---|
| Medial 1 (14 Ga.) | 0.45 | 4980 | 10 |
Priming volumes are approximate and are done without accessories.
Flow rate values are approximate and are determined using deionized water at
100 cm head height.
** Pressure injection flow rates are determined using media of 11.8
centipoises (cP) viscosity, with 152 cm administration set tubing
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>