idinio 140194 WiFi Smart Dimmer User Guide
- June 12, 2024
- idinio
Table of Contents
Smart 2-Way Wifi dimmer
Quicks Start Guide
140194 WiFi Smart Dimmer
Scan for info. & manual
https://www.shada.nl/p/140194
LEET’S MEET ONLINE
www.shada.nl/idnio
Your tablet or smartphone must be connected to a 2.4GHz Wi network
Download the ldinio Smart app from the Google Play or Apple App Store and
create a user account.
https://itunes.apple.com/nl/app/idinio/id1457970650?mt=8
https://play.google.com/store/apps/details?id=com.smart.ledsgo
Basic network requirements.
This device only supports 24GHz WiFi networks so when you won a SGHz router
you must select the 24GHz network or disable* the 5GHz network first in your
router menu. Refer to your router manual for instructions.
Make sure that during the pairing process this device as well as your iOS or
Android device will remain in the W1F range of your router.
Installation
Try switching between Rl or RC. mode when the light dose not dim correctly or
is flickering.
Tum off the melee of the specific power group in the km box and double check
if the existing wall dimmer is realty turned off.
Connect the power wires according to the wire diagram.
Tum On the power again in the fuse box and test the
dimmer.
| Input Voltage | Output Voltage | Output Current | Size |
|---|---|---|---|
| AC220-240V- | AC220-240V- | 1.13A max. | L.70x W: 70mm x H:45 |
Add device
When you have finished mounting the Wi dimmer, tum on the main switch the use boss again and the LED indicator on the emmer will fiash quickly. If this is not the case you must reset the WiFi dimmer by pressing the reset button for 5 seconds.
Launch the app and tap the ‘+’ in the top right corner
Select dimming and switching and tap Smart 2-Wire WiFi Dimmer
Tap Confirm indicator rapidly blinks
Select the right 24GHz Wi network an password and tap Confirm
The app will auto-connect with the device. Once the process is completed. it
will prompt you to rename the device. Enter a new name and ‘Save’
‘Turn on/off
On: Short press on the dimmer button or press the bulb-icoon’ in the app to
turn on the device
Off: Short press on the dimmer button or press ‘bulb- icoon’ to turn off the
device Dimming: hold down the button on the switch for a long time or dimming
in the app.
AP Mode
If adding the device failed . it maybe a networking problem. You can now proceed using the AP Mode for adding the device.
Press the reset button for 5 seconds and make sure that the device lights are
flashing slowly
Tap the icon in the top right corner. then select ‘dimming and switching’.
then select Smart 2-Wire WiFi Dimmer’.
Tap Other Mode in top right corner and select ‘AP Mode.
Check if the connection light is flashing slowly. Press ‘Confirm indicator
slowly blinks’. Then select your 24GHz network. password and confirm.
Now connect you smartphone or tablet with the device s hotspot. Tap Connect’.
The app will now open the settings menu of your smartphone or tablet Open WiFi
setting & Search the smart device name in the list of WiFi networks and
connect. Devices will connect. Now open the Idinio Smart app again and wait
until the connection process is finished.
Wait until the connection is successful.
WARNING
Safety warning!
Ensure you have fully read and understood the instructions in this document
before you install or use the product following the installation/wire diagram
(when applicable). Keep this document for future reference and only use the
product as described in this document. Any other use of the product than
described in this manual may damage the product or cause injury to the user
(e.g. due to a short circuit, fire or electric shock). Disconnect the product
from the power source if problems occur. Do not drop the product and avoid
bumping. Do not use the product if a part is damaged or defective. Replace a
damaged defective product immediately. When a non-standard consumer
(power)installation is required this should be performed by a qualified
technician to reduce the risk of an electric shock. Make sure the product is
sufficiently ventilated during use. Never cover an electrical (LED) device
during usage since it can generate heat causing damage. Besides LED can be
extremely bright and may cause serious eye damage so don’t stare at it
directly. When a product is meant for indoor and/or outdoor use only, this
will be mentioned on the product/parts or in the manual. Keep the product out
of reach of children or animals.
Cleaning and Maintenance warning!
Do not use cleaning solvents or abrasives. Do not clean the inside of the
device. Do not attempt to repair the device when the device does not operate
correctly, replace it. Clean the outside of the device using a soft, damp
cloth (don’t use microfiber cloth). Support: If you need further help or
have comments or suggestions please visit
www.shada.nl/nl/contact
The item should be disposed of separately from household waste The item
should be handed in for recycling in accordance with local emironmental
regulations for vtoste disposal By separating a matted item from base hold was
tesu will help redt Ke the damec haste sent to in on erators land-gland
minimize anypotential regathie impact on human health and the erhironmeht
This product carries the CE mark. which confirms that this product meets
EU safety. health and environmental protection requirements
The full text of the EU declaration of conformity is available at the
following internet address: https://www.shada.nl/downloads.
DOC: https://www.shada.nl/p/140194
Molenmakershoek 28, NL-7328 JK APELDOORN – The Netherlands
www.shada.nl
WEEE: DU 3505, DE: 37281017, RT: 40133, ES: 7020