kogan NBOTLTFL1BA 10M String Light User Guide
- June 4, 2024
- Kogan
Table of Contents
USER GUIDE
OUTDOOR FESTOON STRING LIGHT 10M
WITH LED FILAMENT BULBS
NBOTLTFL10A, NBOTLTFL1BA
SAFETY & WARNINGS
Ensure to read all instructions and warnings in this user guide prior to first use. Retain this user guide for future reference.
- Ensure the power cord is unplugged before installing, connecting, or when replacing the LED filament bulbs.
- Ensure the power cord is unplugged when servicing the string light.
- CAUTION: Do not replace the LED filament bulbs during rain or when the string light is wet.
- WARNING: To prevent breakage during windy conditions, install the bulbs far enough apart to prevent them from hitting each other.
- If using extension cords, do not use them near water.
- To prevent the risk of electric shock, do not submerge the string lights into water.
- The voltage of this string light is 220-240V. Ensure the power socket used matches this voltage.
- Keep the power cord in a dry place.
- To prevent damage or abrasion, do not expose the string light to edges of sheet metal or other sharp objects.
- Cover empty lightbulb sockets and the ends of the string light with caps to limit corrosion and wear and tear.
- If connecting multiple string lights together, do not exceed a combined power of 700W and/or reach a length of 200m.
- If connecting multiple string lights together, ensure there is support near the power socket to prevent the power cord from being pulled out.
COMPONENTS LIST
- String light (x1)
- LED filament bulb (x10)
- User guide (x1)
INSTALLATION
Step 1: Arrange the string light to your liking. It can be arranged on the surface or be secured using additional fixings sold separately (nails, cup hooks, zip ties, or guide wires).
Step 2: Twist and secure the LED filament bulbs to the string light.
Step 3: Connect the male end of the string light to the power cord and connect the power cord to a socket. Switch the power on.
Connecting two or more string lights
To connect two or more string lights, follow the steps and diagram below.
- Connect the female connector of string light 1 into the male connector of string light 2.
- Continue connecting additional string lights the same way (female to male).
- Connect the male connector of string light 1 into a socket and switch the power on.
Note: Do not exceed a combined power of 700W and/or reach a length of 200m.
SPECIFICATIONS
| Power | 220-240V |
|---|---|
| Socket | E27 (Edison bulb, 27mm) |
| Wattage | 2W per bulb |
| Length | 10m |
NOTES
Need more information?
We hope that this user guide has given you the assistance needed for a simple
set-up.
For the most up-to-date guide for your product, as well as any additional
assistance you may require, head online to
help.kogan.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>