BOULT W40 TWS Earbuds User Manual

BOULT W40 TWS Earbuds

Know your W40

What’s in the box?

• Charging Case
• Earbuds
• Type C Charging Cable
• Extra pair of ear tips
• Warranty Card

Product specification

• Product Name: TWS Bluetooth Headset
• Model: Boult Audio AirBass
• Bluetooth version: V5.3
• Speaker: 13mm
• Bluetooth Range: -10m/33ft (without any obstacles)
• Earbuds Charging Time: 45 mins
• Frequency Range: 20Hz – 20KHz
• Technology: HFP/HSP/A2Dp/AVRCP
• Input: DC5V = IA

How to use your W40?

Touch Controls
The Touch Area (Mufti-functional Touch Panel) is located in the upper part of the earbuds handle.

Wearing Earbuds
The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear

Power ON OFF:

Power ON:

• Auto : open the charging case and take out the earbuds to Power ON.
• Manually : Tap and hold the multifuel

Power OFF :

• Auto : Place both earbuds in the charging case, and close the lid.
• Manually : Tap and hold the multifunction button (MFB) for 5 seconds.

Play/Pause

• Tap the MFB once

Next Track

• Double Tap the right MFB

Volume+

• Triple Tap the right MFB

Answer the Call

• Tap the MFB once

Pairing

• Open the charging case, and take out the earbuds, the earbuds LEDs will start flashing automatically until paired with a device.
• Activate Bluetooth on the device, turn on Bluetooth, search tor pairing name ·soult Audio Airbass· and click on it.

Previous Track

• Double Tap the left MFB

Voice Assistant

• Long Press the MFB for 2s

Volume-

• Triple Tap the left MFB

End Call/Reject

• Double Tap the MFB

Game/Music Mode

• Tap the MFB four times

Single Mode :
When on dual mode, put one earbud into the charging case. Only take one earbud out of the charging case and connect it.

Bluetooth Lost :
Turn off mobile phone’s Bluetooth, earbuds will enter pairing mode and can pair with other devices. If the connection range is exceeded, the earbuds will enter the back connection rnode. NO connection within 5 minutes, the earbuds will turn off.

Reset
If your earbuds fail to pair, or only one works, reset them. Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off Bluetooth. Put earbuds in the charging case and then take out to pairing modes, tap L&R 5 tin-res simultaneously, and hear the “DU” prompt voice to clear all pairing. put earbuds back into the charging case.

Voice Prompts

• You will hear ‘power on” when the headset powers on.
• You will hear ‘power off’ when the headset powers off.
• You will hear ‘connected’ when the headset is paired.
• You will hear ‘low battery’ when the headset is in low power status

Maintenance Instructions

Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal channels to be applicable for warranty. Damaging the product intentionally/unintentionally, or due to natural disasters, etc. is not covered in the warranty.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>