Eltako WNT15 Wide Range Switching Power Instructions
- June 12, 2024
- Eltako
Table of Contents
**Eltako WNT15 Wide Range Switching Power Instructions
**
Only skilled electricians may install this electrical equipment otherwise there is the risk of fi re or electric shock!
Temperature at mounting location: -10°C up to +50°C.
Storage temperature: -25°C up to +70°C.
Relative humidity: annual average value <75%.
WNT15-12V DC/24W and WNT15-24V DC/24W:
Rated capacity 24W.
Standby loss 0.1 watt only.
Effi ciency 91%.
WNT15-24V DC/48W:
Rated capacity 48W.
Standby loss 0.2 watt only.
Efficiency 92%.
Modular devices for DIN-EN 60715 TH35 rail mounting
24W-devices: 1 module = 18 mm wide, 58 mm deep. 48W-devices: 2 modules = 36 mm wide, 58 mm deep. At a load of more than 50% of the rated capacity and always if there are adjacent switching power supply units and if there are dimmers a ventilation clearanceof ½ module must be maintained with the spacers DS12 on both sides. Wide-range input voltage 88-264V AC (110V -20% to 240V +10%). Stabilised output voltage ±1%, low residual ripple. Short-circuit proof. Overload protection and over-temperature switch-off by means of swichting off with automatic switching-on after fault clearance (autorecovery function).
Technical data
Residual ripple <100mV
Class of protection II
Protection degree IP20
Starting current 1 ) 18A/230V
Overload 160-200% protectionshort-term
Overvoltage protection 140-170%
Switchable in parallel, number 2 WNT15-24V DC-48W _
Operating temperature -10/+50°C
- If connected on the primary side, 2ms.
Manuals and documents in further languages
Must be kept for later use!
We recommend the housing for operating instructions GBA14.
Eltako GmbH
D-70736 Fellbach
Technical Support English:
+49 711 94350025
technical-support@eltako.deeltako.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>