JONSBO CR1400 EVO Cpu Cooler 4 Heatpipe Tower User Manual

JONSBO CR1400 EVO Cpu Cooler 4 Heatpipe Tower

Product Information

The product is the 14 EVO, a cooling fan for computer systems. It is designed to regulate the temperature of the main board by providing efficient airflow. The fan lead connects to the main board to facilitate its operation.

Product Usage Instructions

1. Locate the main board in your computer system.
2. Identify the fan lead, which is a cable attached to the coolingfan.
3. Refer to the figure provided in the user manual to ensurecorrect placement.
4. Connect the fan lead to the main board. Match the connectorsand insert firmly.
5. Ensure a secure connection to guarantee proper functioning ofthe cooling fan.

Note: If you are using an AMD processor, follow the additional instructions below:

1. Install the AMD spacer column. This helps in maintaining thecorrect distance between the cooling fan and the processor.
2. Refer to the figure provided in the user manual for guidance oninstalling the spacer column.
3. Ensure proper alignment and secure attachment of the spacercolumn.

By following these instructions, you will successfully connect and install the 14 EVO cooling fan in your computer system. This will help in maintaining optimal temperature levels for your main board and AMD processor (if applicable).

Product Overview

Part List

Intel Installation

1. Install the backplate to the motherboard and fix it with spacers
2. Install the mounting brackets and secure with crew
3. Applying the thermal paste on CPU evenly, and remove the protection film from copper base
4. Place the cooler on the CPU while aligning the screws to the backplate mounting points. secure with screwdriver.
5. Connect the fan lead to the main board as shown in the figure above

AMD Installation

1. Remove the plastic retainer of the AMD retention module, place the existing backplate back to MB
2. Installation of AMD spacer column
3. Install the mounting brackets and secure with screw
4. Applying the thermal paste on CPU evenly, and remove the protection film from copper base
5. Place the cooler on the CPU while aligning the screws to the backolate mountina points. secure with screwdriver
6. Connect the fan lead to the main board as shown in the figure above

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>