SAL SWL600BTAM PIXIE Smart Switch G3 User Guide
- June 12, 2024
- SAL
Table of Contents
Smart Switch G3
SWL600BTAM
Version 2.0
Date 22/06/2023
Foreword
IMPORTANT: IN THE INTEREST OF PRODUCT PERFORMANCE AND SAFETY PLEASE READ
THESE GUIDE AND WARRANTY INSTRUCTIONS BEFORE INSTALLING THE PRODUCT.
SAL products are designed in accordance with all mandatory International and
Australian Standards, which require installation in accordance with AS/NZS3000
by a qualified installer and regular cleaning and maintenance of the
equipment. Products are sold in accordance with the following instructions and
SAL standard terms and conditions of sale, available via
www.sal.net.au.
Due to continued product and information updates, product data sourced from
sal.net.au shall not form part of any contract and or technical performance
guarantee unless expressly confirmed in writing by SAL at the time of
order.The product wireframe drawings in this document are intended for
illustration purposes only and may differ from the final physical product. The
installation instruction is subject to change without prior notice.
Product Introduction
PIXIE Smart Switch G3 is the third generation push button smart switch, that
toggles the ON/OFF status of the load via a single press.
2.1 Product Features
- Fits most branded switch plates
- Fits 1 to 6 gang wall plate installation
- Over temperature protection, overload protection, short circuit protection
- Complies with Australian and New Zealand Standard: AS/NZS 60669.2.1
- Smart functions via phone/tablet with the SAL PIXIE or PIXIE PLUS APP
- Multiway control – When pairing multiple PIXIE multifunction control device (e.g. SMF/BTAS) with the same smart Switch, multiway-way control is achieved
- LED indicator illuminates at high brightness when the switch is on, and faint when the switch is off, allowing the user to identify the button in the dark
- LED indicator can be enabled and disabled through the Apps
2.2 The package includes
- PIXIE Smart Switch G3 * 1
- Extra key caps * 2
- Silicon spacer * 1
- Load correction capacitor * 1
- Quick Start Guide * 1
**2.3 Product illustration***
*All drawings shown are for illustration purpose only, actual product may vary due to product enhancement.
Specifications
3.1 Basic specifications
Model No.| Input (V)/(Hz)| Min / Max loads| Colour|
Dimension L x W x H (mm)| Wireless
---|---|---|---|---|---
SWL600BTAM| 240/50| 9*/600W| Blue| 42 x 24 x 24| Bluetooth Mesh
Technology
*Subject to the load’s electrical characteristics, the load may require the inclusion of a load correction capacitor given in the product carton
3.2 Load rating
**No. of switch| Resistive load (Incandescent/High voltage
halogen lamp)| ****Capacitive load (e.g. LED, CFL)| I ndu
c t i v e l o a d (e.g. exhaust
fan)**
---|---|---|---
1| 600W| 400VA| 120VA
2| 500W| 250VA| 100VA
3| 500W| 200VA| 80VA
4| 300W| 150VA| 80VA
5| 300W| 150VA| 60VA
6| 200W| 100VA| 60VA
3.3 Load compatibility
Compatible Loads
Incandescent lamp| Yes
240V halogen lamp| Yes
Low voltage halogen with electronic transformer| Yes
CFL| Yes
LED fixture| Yes
Caution/Notice
Loads with poor electrical performance will apply additional destructive
impact to the switch, beyond its rated capabilities, irrespective of power
consumption. This can result on both a shortened lifespan and irreversible
damage to this device. This device is not compatible with device below this
minimum specification.
-Power Factor < 0.7
-In-rush current > 50A
Installation and Wiring
Installation process
- Make sure the key cap compatibility (pry and replace the default key cap if necessary)
- Check the load rating and confirm the load compatibility
- Turn OFF the mains electricity supply before commencing installation
- Connect the switch according to the wiring diagram
- Turn ON the mains electricity supply, wait for 10 seconds, then test the switch operation by pressing the switch button.
The complimentary capacitor given in the carton operates as a load correction device to assist improving compatibility performances when working with small loads.
Operation
ON/OFF Switch
A quick tap of the button wil turn the load (typically lights) ON or OFF
Multiway control and pairing
The PIXIE smart switch G3 can work with PIXIE secondary device (e.g. SMF/BTAS,
S2W/BTAS and SMRM/BTAS) to achieve multiway control, a pairing process is
required to setup the functionality. Please follow below pairing steps.
- Turn off the SWL600BTAM switch.
- Quickly press the button of SWL600BTAM 4 consecutive times, make sure the LED indicator is flashing in blue and white.
- Quickly press the button of SMF/BTAS, S2W/BTAS or SMRM/BTAS 4 consecutive times within 30s. When the LED indicator flashes twice and then remains lit for 2s, the pairing is successful.
Note: If the SWL600BTAM changes HOME setup in the App or reset to factory, the pairing process will need to be repeated.
| Operation | Function Description | LED Indicator |
|---|---|---|
| 1 Click | Toggle the ON/OFF status of the load | Static brightness as programed |
via the App
4 Clicks| Enter pairing mode, this mode stays 30s| Quickly flash in blue and
white for 30s
9 Clicks| Reset all the settings to factory| Flash in blue and white 3s then
stay lit for 2s
How to download App
Scan QR code or go to App store (IOS) or Google Play (Android) to download the free PIXIE app to your smart phone.
- IOS: Requires IOS 6.0 or later. Compatible with iPhone, iPad and iPad touch
- Android: Requires Android 4.4 or above, devices must support Bluetooth 4.0 Specifications above are for reference only and may vary without prior notice.
| 
---|---
https://www.pixie.app/download/pixie/|
https://www.pixie.app/download/pixieplus/
Warranty
In accordance with SAL’s standard terms and conditions of sale, SAL warrant
this product to be free from defects in materials and or workmanship for a
period as stated below for goods not subject to incorrect installation,
maintenance, operation, mishandling, environmental, unauthorised modifications
or electrical operating conditions outside the nominated product specification
as detailed in these installation instructions. The benefits to you given by
this warranty are in addition to other rights and remedies you have under law.
Our goods come with guarantees that cannot be excluded under the Australian
Consumer Law. You are entitled to a replacement or refund for a major failure
and compensation for any other reasonably foreseeable loss or damage. You are
also entitled to have the goods repaired or replaced if the goods fail to be
of acceptable quality and the failure does not amount to a major failure.
Warranty term – Residential usage (12) months, Commercial usage (12) months
7.1 How to make a claim?
Step #1 – Within 30 days of the fault discovery, please contact the original
place of the SAL product purchase during standard (local) business hours, with
the following information (a) proof of purchase (b) description and quantity
of the claimed fault (c) address of installation. (d) operating hours of the
product.
Step #2 – It is then the responsibility of the original place of product
purchase to report the matter to SAL aftersales;
NSW | ACT| SAL| National Pty Ltd, 40 Biloela Street Villawood NSW| 2163| | P #
02 9723 3099
---|---|---|---|---
QLD| SAL| National Pty Ltd, 36 Whitelaw Place Richlands QLD| 4077| | P # 07
3879 5999
VICT | TAS | SA | NT| SAL| National Pty Ltd, 46-48 Keys Road Moorabbin
Victoria| 3189| | P # 03 9532 3168
WA| SAL| National Pty Ltd, 29 Beringarra Av Malaga WA| 6090| | P # 08 9248
7458
Step #3 – Upon review of your claim and if the product is required to be
returned to SAL for technical evaluation, then at the owners expense the
product must be returned to SAL as per the above nominated locations.
Step #4 – Pending the evaluation, the claim will be validated resulting in the
product being repaired or replaced with the same or best equivalent product at
the discretion of SAL, or rejected if the product fault was found to be caused
by conditions beyond the responsibility of SAL warranty obligations.
Consideration of installation, product removal, return freight and or testing
fees are not the responsibility of SAL.
Scan QR code to access full product information
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>