Energizer L91 AA and AAA Primary Batteries Instruction Manual
- October 26, 2023
- Energizer
Table of Contents
Energizer L91 AA and AAA Primary Batteries
Intrinsically Safe User Instructions (ATEX)
| Product types | AA and AAA primary batteries |
|---|---|
| Product description | The battery cells are AA and AAA Energizer Lithium |
Ultimate types
Model numbers| L91 and L92
Electrical ratings| AAA, 1.5V, 1250 mAh, internal resistance 55 mΩ
AA, 1.5V, 3400 mAh, internal resistance 55 mΩ
Standards tested| 1. EN IEC 60079-0:2018
2. EN 60079-11:2012
Hazardous location| 1. 1-2 AA cells in series or in parallel: Group IIC, T4, -40C to +60C
2. 1-2 AAA cells in series or in parallel: Group IIC, T4, -40C to +60C
Schedule of Limitations| 1. Only fresh cells to be used in multi-cell configurations.
2. This battery is manufactured in a charged state. It is not designed for recharging. Recharging can cause battery leakage or, in some cases, high pressure rupture. Inadvertent charging can occur if a battery is installed backwards in a multi-cell configuration.
3. Maximum surface temperatures under short-circuit test: L91 – 110˚C (-40°C ≤ Ta ≤ +60°C)
L92 – 112˚C (-40°C ≤ Ta ≤ +60°C)
ATEX Reference Identifier on product: Ex ia IIC Ga Baseefa 14ATEX0107U II 1 G
0598
For serial numbers refer to MMYY code laser etched on the label and production
day on can of battery under label.
Date reviewed: March 28, 2022
EC Declaration of Conformity in accordance with European Directive
94/9/EC
Manufacturer: Energizer Holdings, Inc.
Address: 25225 Detroit Road, Westlake, Ohio, 44145
Equipment Type: Energizer L91 AA Ultimate lithium battery (1.5V 3400 mAh)
and L92
Ultimate lithium battery (1.5V 1250 mAh)
Directive 94/9/EC ATEX
Provisions of the Directive fulfilled by the Equipment:
- 1-2 AA cells in series or in parallel: IIG Ex ia IIC, T4, -40C to +60C
- 1-2 AAA cells in series or in parallel: IIG Ex ia IIC, T4, -40C to +60C
Notified Body for the EC-Type Examination
SGS Fimko Oy 0598
EC-type Examination Certificate
Baseefa14ATEX0107U
Notified Body for production: SGS Fimko Oy 0598
Harmonized Standards used:
- EN IEC 60079-0:2018
- EN 60079-11:2012
Other Standards and Specifications used:
- 2006/66/EC on batteries and accumulators
On behalf of the above named company, I declare that, on the date the equipment accompanied by this declaration is placed on the market, the equipment conforms with all technical and regulatory requirements of the above listed directives.
John L. Hadley
Senior Staff Engineer – Regulatory Energizer Battery Manufacturing, Inc.
Energizer Brands, LLC.
533 Maryville University Drive
St. Louis, MO 63141
1-314-985-2000
www.Energizer.com