SAL INR 3000 Radio Instruction Manual

: June 4, 2024
: SAL

Table of Contents

SAL INR 3000 Radio
TECHNICAL SPECIFICATION
OVERVIEW
INTERNET RADIO
INTERNET RADIO
APPLICATION
OPERATION
AVAILABLE FUNCTIONS
USE OF THE INTERNET RADIO
THE USE OF THE MEDIA CENTER FUNCTION
WIRELESS BT CONNECTION
CLEANING
Documents / Resources

SAL INR 3000 Radio

SAL-INR-3000-Radio-product

TECHNICAL SPECIFICATION

20dBm (11b mode)

Woofer| Æ55 mm
THD| ≤ 0,5 %| Encryption| WEP, WPA, WPA2
S/N| ≥ 66 dB| Clock| 24h, date, sleep
Tone| EQ / 3D / personal settings| Sleep timer| 15…180 min
Audio out / Headphones| Æ3.5 mm stereo / 32 Ohm| Battery| Li-ion 3,7V / 2.000mAh
Functions| Internet + FM RDS radio / BT / Media center| DC input| 5 V / 1 A USB-C
Internet server| http://www.skytune.net/newweb/index.php| Charging time| ~ 3,5 h
FM range| 87,5 – 108,0MHz / 99 preset| Operation time| ~ 11 h
BT version| v4.2 / 10m max. / 0 dBm / 2.4 GHz| Ta / rel. Humidity| 0 oC…+35 oC / 30…85%
BT profiles| BR, EDR, A2DP| Dimensions / Weight| 160 x 93 x 40 mm / 260 g

OVERVIEW

SAL-INR-3000-Radio-fig-1

STRUCTURE

(Figure 1.)

switch on/off

favorite stations
volume control
speaker
main menu
local radios/ EQ
4-way control
OK: Approval
sleep timer
favorite stations
LCD display
charging indicator LED
headset output
USB-C charger

socket

FM antenna

INTERNET RADIO

IMPORTANT SAFETY INSTRUCTIONS
READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USE AND RETAIN IT FOR LATER REFERENCE!
WARNINGS

Before using the product, please, read these instructions for use and retain them. The original description is in Hungarian. Persons with reduced physical, sensory or mental abilities, or without the relevant knowledge, as well children above 8 years should only use the equipment under attendance or if they have received instructions for its use and understand the hazards resulting from safe use. This equipment is not intended for children to play with. Children may clean or provide user’s maintenance only under attendance. After unpacking, please, check if the equipment has been damaged during transportation. Keep children away from packaging if it contains bags or any other hazardous components.
In order to protect the audio system from external noises, audio cable routes should be laid far from network cables.
Protect the equipment against dust, vapor, liquids, moisture, frost and impacts, as well as direct heat or sunshine.
Only use it in dry indoor conditions.
Prevent any foreign object from entering the equipment through the holes.
Protect the equipment against splashing water, and do not place any object filled with liquid, e.g. glass onto the equipment.
Do not place any open flame source such as a burning candle onto the equipment.
Do not disassemble or modify the equipment as this may cause fire, accident, or electric shock.
If you experience any abnormalities, de-energize the equipment immediately and seek professional help.
The faulty operation may occur due to the complex IT system and third parties’ different connected devices, which is not the insufficiency of the device.
The availability of the connected media server is not guaranteed if this is hindered by external conditions. Several technological and hardware variations are possible.
Playing of supported files is not guaranteed in every case either as this may be influenced by software and hardware conditions independent of the manufacturer.
Volumes of the different audio files may differ due to their different parameters.
The manufacturer shall not be responsible for lost or damaged data, etc. even if the above data are lost during the use of the above product. You should prepare a backup of the data and programs on the connected data carrier to your PC first.
Speakers may contain magnets therefore do not place any products being sensitive to this (e.g. credit card, tape, compass…) close to them
Improper commissioning or improper operation may terminate the warranty.
Condensation may occur when the equipment is moved from a cold place to a warm place therefore do not energize it for some hours.
This equipment is intended for consumer use and it is not an industrial-professional device.
When the product’s life is expired, it shall be considered hazardous waste. It shall be treated to local regulations. Its integrated battery may be removed by unscrewing the 4 bolts on the back.
Somogyi Elektronic Kft. certifies that this radio equipment complies with the no. 2014/53/EU directive. The EU declaration of conformity is available at the following internet address: [email protected]
Due to continuous developments, technical data and design may change without any previous notice. The current instructions for use may be downloaded from the website: www.somogyi.hu
We do not take any responsibility for possible printing errors, and apologize for them.

To prevent possible hearing loss, do not listen to it at high volme for extended period of time.
DISPOSAL

Waste equipment must be collected and disposed separately from household waste because it may contain components hazardous to the environment or health. Used or waste equipment may be dropped off free of charge at the point of sale, or at any distributor which sells equipment of identical nature and function. Dispose of product at a facility specializing in the collection of electronic waste. By doing so, you will protect the environment as well as the health of others and yourself. If you have any questions, contact the local waste management organization. We shall undertake the tasks pertinent to the manufacturer as prescribed in the relevant regulations and shall bear any associated costs arising.

DISPOSING OF OFALKALINEAND RECHARGEABLE BATTERIE

Batteries, whether alkaline or rechargeable, must not be handled together with regular household waste. It is the legal obligation of the product’s user to dispose of batteries at a nearby collection center or at a retail shop. This ensures that the batteries are ultimately neutralized in an environment- friendly way.

INTERNET RADIO

FEATURES

You can also listen to programmes that are not broadcast by radio stations
Many thousands of radio programmes from all over the world
24-hour access to your favourite programmes according to your mood
An “endless” range of programmes, you can listen non-stop to children’s programmes, tales, Christmas songs, folk music, love songs, cabaret, education, audiobooks,
sports, traffic and all kinds of music not listed here
If you cannot receive your favourite radio stations, you can listen to them in perfect quality through the Internet
You can extend your HiFi equipment by a programme source that is never boring
4in1 portable multi-media
Internet world radio
FM RDS analog radio
Wireless BT connection
Media Center network music store
6.1cm color TFT LCD screen
Sleep timer
EQ styles, 3D, and individual EQ setting
List of radios of the continents and countries
23,000+ radio stations
List of favourite stations
Operable from PC or mobile browser
Add programmes manually as well
Stereo headset connector
Connectable to active sound box and amplifier
Wireless IN connection
WiFi connection 802.11b/g/n (2.4)
UPnP/DLNA compatible file sharing
2 Watt speaker for musical sounds
Integrated battery
Expectable charging / operating time: 3.5h / 11h
Accessories: USB-C charging cable, ~1.0m

APPLICATION

This radio allows you to receive several programmes due to the use of the latest technologies. In addition to receiving internet and FM radio stations, it can play contents from mobiles and network content stores through wireless connection. As it has a wired output, it can be connected to the proper inputs of stereo audio equipment. You can listen to it with the use of a stereo headset as well. The integrated speaker provides high quality musical sounds. Its internal battery can be charged with the use of the USB-C charging cable accessory. The network adapter is optional, the recommended traditional types are: e.g. SA 24USB, SA 50USB. The equipment shall be connected to a WiFi network for full operation.
COMMISSIONING
This product can work with smartphones and IT devices. Therefore, this description assumes that the user has a general knowledge of how to use the above devices. The use of the radio is similar to that of computers and mobile phones. Some settings may need deeper knowledge and knowledge of the English language. This description presents the current operation of the equipment, which may change with developments and software updates. In the above case, act reasonably as with a mobile or computer. If needed, contact the manufacturer.
Some functions need services/software/hardware provided by a third party. If these are possibly modified or updated or if an improper version is selected, the available functions and operations may change, which is not an insufficiency of the product. The full operation may be influenced by the type and settings of the connected router, the quality of the Internet / WiFi network, its operating range, the contents broadcast by the provider of music programs, etc. Some special Internet settings may need a specialist if the network environment is not usual.
POWER SUPPLY
The equipment can be operated from an integrated battery, which can be charged with the use of the USB-A / USB-C connection cable accessory (DC IN 5V USB-C socket on the back). Charge it before the first use. You can use an (optional) network charger as charger, or connect it to an (optional) Power Bank or (optional) USB socket.
A red LED is lit on the back during charging. When automatic charging is finished, the LED switches to green colour. If the equipment is turned on, the process of charging can be followed in the upper right corner of the screen as well. At the end of the process remove the charging cable and start to use the equipment. If the battery is fully drained, charging time is approximately 3.5 hours. This provides about 11 hours of operation, at medium volume and medium display light. The above depends on the set volume, the selected operation mode and ambient temperature. The test was performed by listening to the radio, at room temperature. The equipment may be charged during use as well but this increases charging time and causes additional noise.

The current charging status is shown in the upper bar of the display. The symbol starts flashing before the battery becomes fully drained. Charge the battery if volume or sound quality decreases.
A 5V / 1A USB charger or a traditional USB charger of higher performance should be purchased.
Charging is not guaranteed by all QC3.0 or other special quick chargers. If charging does not happen, use another traditional charger.
Recommended network charger types: e.g. SA 24USB, SA 50USB

OPERATION

Turn on and off
Keep the button on the top of the equipment pressed for a longer time to turn on and off the equipment.
Volume
Volume is controlled with the use of a knob (VOLUME). The knob does not have an end position, it can be fully rotated. The current volume can be seen on the display.
In the main menu you can step forward (to the right) using the buttons, and backward (to the left) using the buttons. The desired function can be selected by the OK button.
You can step the various menus and submenus by pressing the arrows, you can approve your selection by pressing the OK button. Press buttons to reach the submenus within the menu, and use button (OK button) to enter the selected submenu. The button allows you to step back a level.
CONNECTION TO THE INTERNET
Use the integrated WiFi and establish a wireless (WLAN) connection to the Internet through your own network (a 2.4G WiFi router is required). When you first turn on the equipment or reset the factory state (FACTORY RESET), the “WiFi connection wizard” usually gives the following message on the display: CONFIGURE NETWORK? (Would you like to configure the network?)
If you do not see the above message, you can find the WiFi connection option here in the menu: button; MAIN MENU / CONFIGURATION / NETWORK / ADD- REMOVE AP / ADD AP-SCAN
Now the list of available WiFi networks appears; select the one you wish to connect to, then provide your network password.

In order to provide the password of the WiFi network, select the desired characters one by one in the ABC that appears, by stepping forward and backward. Press buttons or keep them pressed to step the letters then press OK button to select the currently highlighted letter. Press OK button shortly.
If you make a mistake, use button to clear the last character.
Make sure you use small and capital letters of the password properly.
After you have provided the complete password correctly, please, keep the OK button pressed for a long time. The equipment will immediately connect to the Internet.
If needed, restart setting starting from the main menu. This setting needs to be done only once.
During the process of connection, the radio should be in the same room and within 2 metres from the WiFi router.
This equipment does not support 5G WiFi networks, connect to 2.4G network, DLNA and UPnP router.
Supported encryption procedures: WEP, WPA, WPA2
Additional useful information on the connection conditions is included in the chapter on Media Center.

If your WiFi router has a WPS function (WPS button), you can connect more quickly and in a simpler manner. In this case, instead of ADD AP SCAN (search WiFi network), activate ADD AP WPS BUTTON function below it in the menu then press the WPS button of the router. Encrypted connection will be automatically established without providing the password as well. If you have connected the radio to the Internet, the current reception intensity can be seen in the upper left corner of the display. It is recommended to place the radio in a way that allows as many sticks as possible (max.4) to be seen for a stable internet connection.
SMART WIFI CONFIGURATION – ONLY FOR ADVANCED USERS If you do not wish to establish wireless connection to the WiFi network as usual from the menu of the radio, you can also do this with the use of the EspTouch application, which should be installed on your iOS/Android phone before. Find this application in the store.

connect your mobile to the WiFi network to which your radio will be connected as well
the radio should be within 2 metres from the router
select the SMART CONFIG menu point of the radio (see above)
start the EspTouch application on your phone
after the name of the WiFi network has appeared, give the relevant password
touch the MULTICAST then CONFIRM buttons
now the radio is connected to the network

SELECTION OF THE LANGUAGE OF MENU Follow the menu points below to reach the languages:

button; MAIN MENU / CONFIGURATION / LANGUAGE – make your selection () then confirm (OK or ) the selected language.

Restart setting if needed starting from the main menu where you can return with the use of the button.

AVAILABLE FUNCTIONS

Options that can be reached from the main menu: (or press it several times to return to the Internet radio station last listened to)

Main menu| Submenu| Brief description of functions
---|---|---
FAVOURITES| | A list of favourite programmes, if you have indicated such ones. The HEART button allows direct access to it. Keep pressed the HEART button to transfer the current programme to the list of FAVOURITES (max.99)
Three favourite programmes are directly accessible with the use of buttons 1-2-3 on the top. If you keep it pressed, the current programme will be stored in the selected storage place.
INTERNET RADIO| Skytune| Search for Internet radio stations by different features. For example, the most popular programmes, local or global programmes, music style or regions.
Search (Skytune)| Search by the name or a part of the name of the radio station.
History| Search among the previously selected items (max.99).
MEDIA CENTER| UPnP| Access to own media server – if you have such one on your own network and it has been properly connected.
My play list| Access to own play list.
Clear my list| Clear the list of own media server.
FM RADIO| | Search for FM analogue radio stations.
BT

CONNECTION

| | Connect wireless BT devices and play from them.
TURN OFF TIMER| | Set turn off timer. The equipment will turn off after a delay of 15-180 minutes. Direct access is also possible by the SLEEP button.
SETTINGS| | details in the next table

Details of SETTINGS menu:

Submenu| Brief description of functions, configurations
---|---
Network| Set Internet connection

Network settings

– “Always on”: wireless IN function remains on even if it is not used, e.g. in FM, BT mode. A quicker IN access is provided if you switch back to IN radio mode.

– “Automatic switch off 30s”: the WLAN switches off after 30 seconds if it is not needed any longer, e.g. if you do not listen to IN radio. This mode saves you operating time and may allow longer operation.

WiFi channels

– Select the place of operation: China / Japan / USA / Europe. Not all WiFi channels may be reached in every country.

Add/Remove IN AP

– Connect to Wifi: search networks and provide password.

– Connect WPS: search WPS compatible router.

– SMART configuration: WiFi configuration via an iOS or Android telephone. It needs the installation of EspTouch application, see below.

– Remove Wifi network: clear pairing.

AP

– The name of connected WiFi network.

WiFi signal

– Signal strength of the connected WiFi network. Generally, it is considered weak below -70dBm and it may hinder the operation of the radio. Place the router closer or use signal amplifier.

IP

– Dynamic (default) or fixed setting (Only modify if any problem occurs.)

DNS

– Dynamic (default) or fixed setting (Only modify if any problem occurs.)

Date and time| Set precise time and date

Time zone

– Select the automatic or manual option.

– In the latter option, it can be selected from the list of continents and countries. Factory setting: automatic definition of time zone.

Set time format

– 12 or 24-hour indication mode.

Set date format

– You can select the order of displaying the day-month-year.

Summer-time period

– Turn on or off depending of the country.

Use Internet time

– Turn on or off

Access path to time server

– pool.ntp.org

Time setting from FM RDS data

– Can be switched on or off

Languages| Select the desired language

– Select from the drop down list.

FM setting| Setting reception parameters

Search for programmes and list of programmes found.

– FM reception area setting

– Automatic FM station search and storage

– List of radio stations found

---|---
Local radio| List of local, national programmes

LOCAL/EQ button allows direct access as well

– Set automatic reception region through the Internet.

– You can also set manually the region (country) whose programmes should be considered local channels.

Set playing| Set the playing of songs

– If playing happens from a media server: repeat all songs / repeat the current song /

random order / play normally

Continue

playing

| Show main menu or the function/station last used when turned on

– If activated, after turning on you can hear the programme last listened to.

Display brightness| Set display brightness

– If turned on, display brightness decreases when you do not operate the equipment (after about 20sec).

– You can set the desired two types of brightness during or after operation. In order to increase operating time, it is recommended to select the lowest still appropriate brightness level.

EQ tone| Set sounding

For direct access, press LOCAL/EQ button long.

– You can select from different music styles: linear rock / rock / jazz / pop / classical / dance music / heavy metal / disco / live music / soft / concert hall / advanced

– Advanced settings: output signal level / individual 5-band EQ / 3D effect

If you find the interventions insufficient, consider the use of an external amplifier to provide more intense changes.

Buffer store| Separate memory for continuous playing in the case of unstable Internet.

– 2s or 5s can be selected. For weak Internet connections, 5s is recommended to prevent intermittent playing.

Information| Network and system information

– Internet connection parameters; SSID, BSSID, signal amplitude, IP address, Gateway, NM, DNS, MAC

– Internal software parameters; Model, Code ID, MID, APP

Software update| Possible update by manufacturer, option

– Installation of updates issued by third party.

Factory reset| Clear personal settings, reset factory state

– Use it only if faulty operation is assumed.

– Clear all personal, individual settings.

USE OF THE INTERNET RADIO

Use the buttons and OK buttons to select the ‘GLOBE’ function.

Select the Skytune option. Select a search feature from the list that appears (popularity, local radio, music style, region…)
Following the above, another list is provided for more precise searching, make your selection again.
Use the arrow pointing to the left to step back.
Press shortly the LOCAL/EQ button to have easy access to local (national) programs.
You can stop the programs and select from them with the use of arrow buttons and an OK button.

button on the equipment. Displayable information varies and may change by radio stations and programs. LIST OF FAVOURITE PROGRAMMES

This comfort function allows you to have access to your favorite programs immediately. When the main menu is activated, the menu point FAVOURITES is in the middle of the display, offering this list. However, it is accessible through the button, as well as the top three favorites can be reached through buttons 1-2-3 on the top of the radio.
Add to the list
Select the radio station to add. Keep pressing the button on the equipment until the arrow symbol indicating downloading appears in the upper bar of the display. Now the radio station is added to the list. The above list may contain max. 99 radio stations. Select from the list
Press the button to display the list of programs. Select the program you wish to listen to and then press the OK button.

Edit list, change order
In list view you can reach the edit function with the use of the button; here you can delete the selected programs or relocate them, or store them in the desired order. Follow the instructions appearing on the display.
Quick buttons
Keep pressing buttons 1-2-3 on the top of the equipment to assign the 3 highlighted radio stations to them, while listening to them. Press briefly the above buttons to listen to the concerned stations quickly, without searching.

THE USE OF THE MEDIA CENTER FUNCTION

Similarly to the selection of the Internet radio, select Media Center mode as described above. Through the radio, you can listen to the contents shared from your own media stores on your own WiFi network. With the UPnP function selected, the radio starts searching for the shared contents detectable on the network. In the case of several pieces of compatible equipment, they appear in one list, from which you can select the one you currently wish to reach. The content and appearance of the submenu that appears subsequently depend on the concerned equipment. Playing of the selected program is started. Keep pressing arrows to step among the songs. Use the button to read the information on the currently played file, and use the arrow to return to the list of songs and select another one. You can add favorite songs to your own playlist. If this is successful, a ‘download’ arrow pointing downwards appears in the upper left part of the display. Following this, the selected songs (max.99) can be found in the menu point My Playlist (directly under the UPnP menu point). In the lowest submenu, you can clear the complete playlist in order to create a new one.

The media server and radio have to connect to the same WiFi network.
The directories to be used have to be shared and external access has to be enabled for them.
Only files of 16bit/44.1kHz format are supported.
Playable file types: MP3, FLAC, AAC, AAC+
The source device has to support UPnP protocol and it has to be DLNA compatible. Note that the above devices are available in the market in several versions, and these are not always compatible with one another.
The home media server may be provided by a computer, a network hard disc, NAS storage or similar devices. They need proper configuration. This has to be checked in their manuals.
You have to check whether the firewall blocks output ports. Minimum requirements for the radio: UDP, TCP port 80, 443, 8008, DNS port 53.
If the router and server is not set for DHCP, static IP addresses have to be configured on the radio.
The radio has a separate MAC address for wired and wireless Internet connections.
The radio supports the following encryption procedures: WEP, WPA, WPA2.
The protocols and DLNA compatibility levels of the different devices may considerably vary due to the various current hardware and software versions, which may prevent them from functioning together with the radio. Often the manufacturers of the above devices do not provide precise and up-to-date information on the actual compatibility levels. Therefore smooth interaction among certain devices cannot be guaranteed.
The complex IT system and third parties’ various equipment to be connected may result in faulty operation, which is not the insufficiency of the concerned equipment.
Access to the connected media server is not guaranteed if it is hindered by external conditions. Several technological and hardware versions are possible.
Playing of supported files is not guaranteed in every case either as this can be influenced by software and hardware conditions being independent of the manufacturer.

USING FM RDS RADIO (analog terrestrial broadcasting) Select FM RADIO mode from the main menu. This is the traditional, most common way of broadcasting radio programs. The telescopic antenna at the rear must be pulled out for the reception. With the antenna in the right position and near the window, reception is usually better.
The first time you use it – or if you have not previously stored FM stations – it will ask you if you want to search for radio stations. Press the OK button. The display shows the frequencies checked and the number of programs found.

You can also start a new search at any time from the SETTINGS menu.
If you have searched for radio stations, you will see a list of them in the order of reception frequency. The ordinal number of the program is shown in the top right corner. Choose one using the method you learned.
Use the left arrow to return to the list of stations and select another program. Use the right arrow for more textual information about the program if it is provided by the service provider (FM RDS).
The display can also show the clock.
The right arrow can be used in the list view to edit the list or delete selected programs.
Follow the on-screen instructions!
Manual tuning—fine tuning
Press and hold OK and the TUNING screen will appear on the bottom right part of the display.
Use the buttons to set the desired frequency.
To exit, press and hold OK again and the “TUNING” message will disappear.
This frequency can be saved to your favorites.
In order to work, there must be good quality FM reception in your area. Check the FM broadcasting stations available in your area.
If reception is good, the ST (stereo) signal is displayed in the top left corner next to the RDS signal.
The search stops when it detects changing signal strength—this does not always mean that a radio program was found.
The reception ability of the radio depends to a large extent on where it is used and the current reception conditions.
Nearby electrical equipment and large metal objects may interfere with reception.
Be careful not to break the antenna!
This mode of operation does not require an Internet connection.
Remember, if FM reception is weak in your area, you may find the programs you are looking for in Internet radio mode!

WIRELESS BT CONNECTION

The equipment can be paired with other devices communicating according to BT protocol, within an effective range of maximum 10 meters. Following this you can listen to the music played on a mobile phone, tablet, notebook and other similar devices on the radio. Select BT mode in the main menu. Place the device to be paired near it and find the nearby BT devices, also including this radio as described in the instructions for use. Connect the two devices to each other. After the successful connection, the display of the radio shows the access address of the external device and the current operation mode. Following this, you can listen to the desired program through the speaker. The play mode of the device playing the program (e.g. mobile phone) can be usually remote controlled using the buttons of the radio: play/pause: OK, step backward and forward: to disconnect BT connection: press long.

If you wish to listen to music from an external music provider, manage this on your mobile device, and make the speaker sound through the BT connection.
The radio can be paired with one BT device at a time.
After its turning on, it automatically reconnects to the previously paired and properly connected external device if it is near in a turned on state, and the BT mode of the radio is selected.
If wireless connection is disconnected, select again the BT mode if necessary and now pairing mode is activated again. If needed, turn off and back the radio or BT mode on your mobile device.
If there is an incoming phone call on the connected mobile phone during listening to music, playing of music is suspended.
The current effective range depends on the other device and the environmental conditions (e.g. walls, human bodies, other electric devices, movement…)
Electric devices functioning nearby may cause abnormal operation, noise, which does not suggest the faulty operation of the device.
The individual features of the external devices may cause abnormal operation, this does not suggest the failure of the equipment. In some cases, the BT function may be operated to a limited extent depending on the external device.

SLEEP TIMER
You can fall asleep to music if you set automatic, delayed turning off. You can set the period of delay in the TURN OFF TIMER point of the main menu. It is also accessible directly with the SLEEP button. After the delay (15-180 minutes) expires, the radio turns off. When the function is activated, a symbol and the time remaining until turning off appear in the upper bar of the display.
AUDIO OUTPUT
You can connect a headset or external devices with audio inputs to the 3.5mm stereo headset socket on the back. After the connection the integrated speaker becomes silent. You can listen to contents from the Internet or wireless BT source through external devices as well such as HiFi equipment, amplifier, active sound box…

The achievable sound quality depends on the quality of the external device, as well as its volume and tone settings.
It is recommended to turn off the tone control of the radio and only use it on the external device.
The low outgoing signal from the radio (volume) may cause extra noise, whereas too high a signal may cause distortion.
You can control the output signal level in the ADVANCED mode of EQ settings if needed, as well as a 5- band tone control is also available.
A connecting cable and external adapter have to be purchased in some cases for proper connection.
For further information, please, refer to the instructions for use of the equipment to be connected.

MANAGEMENT OF THE RADIO FROM THE BROWSER (Chrome or Internet Explorer)
Search for radio stations, edit the list of favorites or switch to another program on the computer or via the phone The computer (phone) and the radio have to connect to the same WiFi network. Select the SETTING menu. Search for and select the INFORMATION submenu. Select the NETWORK INFORMATION point and open it. In the IP data, find the IP address of the radio. Enter the above address in the browser of your computer (e.g. Google Chrome) then list of FAVOURITES compiled formerly by you will appear. The radio should operate in Internet mode in the meanwhile. The changes made to the computer will become immediately effective to the radio as well. SAL-INR-3000-Radio-
fig-7

ID	Number in the list
CHANNEL NAME	Name of radio station
CHANNEL URL	Stream path
PLAY	Listening to the station
EDIT	Setting the displayed information
DELETE	Deleting the station from the list
CHANNEL PLAYING ON DEVICE	Listening to the station on device
DELETE FROM MY FAVORITE	Deleting active station from the list
ADD CHANNEL	Adding: name of radio / stream URL address / country / music

Search for radio stations, edit the list of favorites or switch to another program on the computer or via the phone, through the website of the Skytune provider
Give the following address in your Chrome or IE browser: www.skytune.net Click on the BROWSE/SEARCH button on the page that appears. Provide the features of search (continent, country, music style, name, or part of the name of the radio station). Following this several dozen programmes belonging to this group will appear from the concerned country You can browse the options easily. Click on the heart icon next to the selected station.

A window appears where you can enter the data of the radio station you wish to add to the list of FAVOURITES or which you only want to listen to. Select either add or listen to option then give the IP address of the radio in the proper field. Select SEND button to perform the operation or the CLOSE button to exit.

If the computer or network is protected by a firewall or proxy, check if web access is enabled for the browser. Often access to the radio is easier from a mobile phone.
The warnings of the chapter titled Media Center include useful information and conditions for the connection of the computer.

UPDATING THE SOFTWARE
If the program operating the equipment is further developed by the manufacturer e.g. for the addition of new functions, and services then updating usually happens automatically through the Internet. After a published update becomes available, it’s downloading and installation are started after turning on the equipment. In the meantime, the display shows the following text: UPDATING, PLEASE DON’T POWER OFF… (Updating happens, please, don’t turn off the equipment)

IT IS PROHIBITED TO TURN OFF OR SWITCH OVER THE RADIO DURING UPDATING.
he version number of the current software (MACHINE ID) can be checked in the following place: SETTINGS / INFORMATION / SYSTEM INFORMATION / MID: XYZ…
The manufacturer of this equipment does not have any effect on which radio stations are available, they are provided by the (SKYTUNE) program provider.
Manual updating: in menu point Settings / Update software.
Do not forget that new radio programs can be added to the current offer subsequently as well. See the chapter titled MANAGEMENT OF THE RADIO FROM THE BROWSER.

CLEANING

Before cleaning turn off the equipment, and disconnect the charging cable. Use a soft, dry cloth. Do not use aggressive cleaning agents and liquids.
MAINTENANCE
Periodically check the integrity of the connecting cable and casing. If you notice any abnormality, de-energize the equipment immediately and contact a specialist.
TROUBLESHOOTING
If you notice any fault, turn off the equipment, and remove the cable from the mains socket. Later try to turn it on again. If the problem persists, check the following list. It may help you fix the problem if otherwise the equipment is properly connected. Contact a specialist of needed.
Reset
If the radio gives improper reactions or its operation is frozen, turn it off as follows:
Keep pressing the OK button and the ON/OFF button until the display becomes dark.
Then turn it on again as usual.
General
The equipment does not function, the display is not lit.

It is not turned on.
Check the ON/OFF switch.
The connecting cable connection is not correct.
Connect the (optional) charger to the mains, and the cable to the equipment correctly.

The equipment apparently works but it does not give a sound.

The setting of volume control is not correct.
Make sure that volume control is not set to the minimum value.
The connection of the audio cables is not correct.
Check if the connection of the audio cable is correct and if it is connected according to the standard.

Internet radio The radio stations are silent.

The Internet connection has not been established or it is intermittent.
Check if the WiFi password is correct.
The Internet bandwidth is insufficient, particularly if other devices are connected to it as well.
In the menu select the 5s buffer storage setting instead of 2s.
Change encryption, the radio supports the following: WEP, WPA, WPA2
Test network availability with the use of a mobile phone.
Check the DHCP and IP settings of your peripheral devices (modem, router, gateway, …).
The searched station may not broadcast in 24 hours presently, this may be possible in another period.
If too many users try to connect at the same time, the provider’s servers may be overloaded.
If the number of listeners reaches the maximum allowed number, new persons cannot connect at the same time any longer.
The access link to the radio station may have changed. Check it and enter the new link.
Ask a specialist for help.

If you wish to use the media server function but the radio does not find a compatible device.

Make sure that the radio and the media device are connected to the same network.
Check the settings of the media device, whether the sharing of the files you wish to have access to is enabled, and their compatibility with the files that can be played by this radio.
DLNA and other required technological solutions are not uniform at all manufacturers. Co-functioning is not guaranteed in apparently compatible devices either due to the individual solutions of the manufacturers on which they do not give any information in advance.
PC settings, firewall, and router configuration may also cause operational problems.
A specialist may be needed for the configuration of the external media server.
The chapter titled Media Center includes additional information on the conditions of the Internet connection.
Distribuitor: S.C. SOMOGYI ELEKTRONIC S.R.L. J12/2014/13.06.2006 C.U.I.: RO 18761195
Cluj-Napoca, judeţul Cluj, România, Str. Prof.
Dr. Gheorghe Marinescu, nr. 2, Cod poştal: 400337
Tel.: +40 264 406 488,
Fax: +40 264 406 489
wwwsomogyi.ro
Producător: Somogyi Elektronic Kft