soundcore A3136 Glow Mini User Guide

: June 16, 2024
: Soundcore

Table of Contents

APP
BLUETOOTH LINKING
SMARTPHONE CONNECTION
SPEAKER CONNECTION TO SMARTPHONE
Button Controls
Important Safety Information
FCC Statement
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

soundcore A3136 Glow Mini

APP

|
---|---

Google Play and the Google Play logo are trademarks of Google Inc.

| |

Apple and the Apple logo are trademarks of Apple Inc.

For FAQs and more information, please visit :soundcore.com/support

Social Icon @SoundcoreAudio
@soundcoreaudio
@soundcoreaudio

www.quefairedemesdecchets.fr

PAP 22
Raccolta Carta

A3136 51005004158 V03

BLUETOOTH LINKING

Press the Bluetooth button to enter Bluetooth pairing mode, then select “soundcore Glow Mini” from the Bluetooth list to connect.

SMARTPHONE CONNECTION

With one speaker connected to a smartphone, press and hold the Bluetooth button for 2 seconds on two speakers to enter TWS pairing mode.

With one speaker connected to a smartphone, press the PartyCast button on up to 100 Soundcore speakers with PartyCast function to synchronize audio and light.

SPEAKER CONNECTION TO SMARTPHONE

With one speaker connected to a smartphone, press the PartyCast button on up to 100 Soundcore speakers with PartyCast function to synchronize audio and light.

Button Controls

18-month limited warranty

service@soundcore.com
support.mea@soundcore.com (For Middle East and Africa Only)
support@anker.com

+1 (800) 988 7973 (US/Canada)
+44 (0) 1604 936200 (UK)

Input: 5V ⎓ 1A
Charging time: 3 hours
Playtime (varies by volume level and playback content): Up to 12 hours*
*Note : The 12-hour max battery life is for reference only and may vary depending on music content and battery degradation after multiple discharging cycles. It’s achievable with the light show switched off, BassUp off, the volume level at 50%, and using a Bluetooth streaming source.

Anker Innovations Limited | Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Anker Technology (UK) Limited | GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom
Anker Innovations Deutschland GmbH | Georg-Muche-Strasse 3, 80807 Munich, Germany

Important Safety Information

Do not place naked flame sources, such as lighted candles, on or near the product.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Only use attachments/accessories specified by the manufacturer.
Operating temperature should be between 0°C to 40°C/32°F to 104°F.
Do not make unauthorized alterations to the product; doing so may compromise safety, regulatory compliance, system performance, and may void the warranty.
Servicing is required when the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
The product contains a battery pack, so it should not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

**Notice

**

This product complies with the radio interference requirements of the European Community.
Declaration of Conformity
Hereby, Anker Innovations Limited declares that this product is in compliance with Directives 2014/53/EU & 2011/65/EU and amendment (EU) 2015/863.
The full text of the EU declaration of conformity is available at the following internet address: https://www.soundcore.com.

Maximum output power : 7.12 dBm
Frequency band : 2.4G band (2.402GHz-2.480GHz)

This symbol means the product must not be discarded as household waste, and should be delivered to an appropriate collection facility for recycling. Follow local rules and never dispose of the product and rechargeable batteries with normal household waste. Correct disposal of old products and rechargeable batteries helps prevent negative consequences for the environment and human health.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

Radiation Exposure Statement
FCC RF Exposure requirements: The highest SAR value reported under this standard during product certification for use next to the Body/ Limb with the minimum separation distance of 0 mm. This transmitter must not be collocated or operating in conjunction with any other antenna or transmitter.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone : +1 (800) 988 7973

IC NOTICE TO CANADIAN USERS
This device contains licence-exempt transmitter(s)/receiver(s) that comply with Innovation, Science and Economic Development Canada’s licence-exempt RSS(s). Operation is subject to the following two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference that may cause undesired operation of the device.

Radio Frequency Exposure Statement

This EUT is compliance with SAR for general population/uncontrolled exposure limits in IC RSS-102 and had been tested in accordance with the measurement methods and procedures specified in IEEE 1528 and IEC 62209. This equipment should be installed and operated with minimum distance 0 mm between the radiator and your Body/ Limb. This device and its antenna(s) must not be co- located or operating in conjunction with any other antenna or transmitter.

CAN ICES-003 (B) / NMB-003 (B)
This Class B digital apparatus complies with Canadian ICES-003