SAL FLP24V10M Flexi 24v Single Color 10m Kit User Manual
- June 4, 2024
- SAL
Table of Contents
SAL FLP24V10M Flexi 24v Single Color 10m Kit
Application
Versatile IP65 LED white colour strip kit ideal for residential features
Design Specifications
- 10 metre LED strip with 3M self-adhesive tape, plug and play IP20 driver
- Choice of 3000 / 5000K, CRI>80
- Non-dimmable driver as standard, optional dimmable driver to order.
- Heat sink required for system performance
- Cuttable every 100mm NOTE: when cutting LED strips, it is always important to calculate the remaining LED load to reconfirm its compatibility with the existing driver, as driver changes may be required with moderate reduction in loads
Performance
Dimmable – OPTIONAL
Technical Specification
Model No.
| Input Voltage (V/AC)| Watts per metre (W/m)| Beam Angle (°)|
CRI| Luminous Flux Per Meter (lm/m)| LEDs Per Metre
---|---|---|---|---|---|---
FLP24V10M/WW/SS| 240| 6| 115| 80| 300|
60
FLP24V10M/DL/SS
| 240| 6| 115| 80| 300|
60
| Model No. | Dim (mm) | Colour Temp. (K) |
|---|---|---|
| FLP24V10M/WW/SS | 10000(L) x 10(W) x 2.5(H) | 3000 |
| FLP24V10M/DL/SS | 1000(L) x 10(W) x 2.5(H) | 5000 |
Due to continued product and technology enhancements, data sourced from sal.net.au shall not form part of any contract and or technical performance guarantee unless expressly confirmed in writing by SAL at the time of order. Products are sold in accordance with SAL Terms and Conditions of sale and all images shown are for illustration purposes only and may vary from the actual colour or finish. Unless specifically stated, all IP ratings nominated for Interior products are from “below the ceiling”.
TO TURN YOUR HOME INTO A PIXIE SMART HOME, SELECT A PIXIE CERTIFIED INSTALLER.
For more information please scan me
NSW/ACT: 02 9723 3099
QLD: 07 3879 5999
VIC/TAS/SA/NT: 03 9532 3168
WA: 08 9248 7458
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>