JONSBO N3 Nine External Storage Devices Fit Instruction Manual
- June 13, 2024
- JONSBO
Table of Contents
JONSBO N3 Nine External Storage Devices Fit
Package Content
Connectors
Parts Diagram
Installation Guide
PSU installation
- Use the screw wrench to loosen the screw
- Remove the fan bracket
PSU installation
- Install the power supply on the power supply rack.
- The installed power supply is placed inside the chassis and locked with screws.
Cable management
Before install the motherboard, please refer to illustration to organize
the cabels.
Motherboard Installation
The motherboard is placed in the installation area and secured with screws.
Fan bracket installation
First connect the fan cable to fan socket, than install the bracket and
fan.
Motherboard Installation
- Remove the PCI-E bracket.
- Insert the graphics card to MB slot, secure with screw.
2.5″ SSD Installation
2.S”SSD installation position, secure with screws.
Top cover installation
After install all the hardware, install the top cover, secure with screw by
wrench.
3.5″ HDD installation
- Pull out the front panel.
- Install rubber grommet to HDD with screws first, insert the assembled HDD into the corresponding slots.
© 2022 JONSBO Technology Co., Lid. All right reserved. Specifications are subject to change without prior notice. Some trademark may be claimed as the property of others.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>