Teltonika RUTX11 Remote Tower Site Management Owner’s Manual
- June 13, 2024
- teltonika
Table of Contents
RUTX11 Remote Tower Site Management
CHALLENGE
Since the market is expanding, more and more base stations are installed in
remote areas.
It is extremely expensive to run electricity cables for hundreds of miles to
power up the tower
infrastructure. Due to this fact, the base stations and other site components
are usually
powered by the combination of diesel generators and UPS – uninterruptable
power supply
systems. Furthermore, these tower systems are self-sufficient, expensive, and
controlled remotely;
they include CCTV cameras for security, access control barriers, and separate
site
manager controller systems. All of these solution components must be
controlled and monitored.
Due to the remote nature of such sites, in very rare cases, they have cable
Internet
connectivity available. Since it is estimated that there are more than 6.5
million base stations
worldwide, the only sensible way to monitor and control all of their
infrastructure sites is to
do so – remotely. The challenge here is clear – to provide secure and reliable
access to the
internet without any cable infrastructure available.
SOLUTION
The cellular base station tower site is a complex infrastructure solution
since it includes various
elements, as mentioned above. However, most of those parts are connected
directly to
the tower site controller (also called site manager), which jointly monitors
and allows to control
everything using a single platform. These tower site controllers need to be
connected to
the Internet. Our partners are using the RUTX11 to ensure a secure and
reliable connection,
which grants the tower site controller connected to the Internet using 4G LTE.
Besides, RUTX11 has Dual-SIM functionality with auto-failover, which increases
solution reliability.
Using RUTX11 gives grants the possibility to access the controller remotely
and manage
a large number of sites from a central management center. Also, this
professional cellular
router is equipped with Gigabit Ethernet and Wi-Fi, which allows connecting
additional
components like CCTV cameras or access control barriers. Furthermore, every
maintenance
company must have alerts and notifications if something happens to the system.
In this case,
the whole system is controlled remotely via site management software, and our
router –
RUTX11 – is managed and controlled via RMS – Remote Management System. The RMS
ensures
that RUTX11 gets all the latest firmware updates and can provide valuable
alerts and
usage reports.
BENEFITS
Reliability – our RUTX11 has two SIM card
slots, meaning that you can use two different
operators for the best internet connection
reliability.
Wireless interfaces – RUTX11 has 2.4 & 5
GHz Wi-Fi included, which enables integrators
to provide internet to various devices
without additional cabling.
Remote control – our product can act as a
gateway between the controller and software
system for control and management.
Remote configuration – having thousands
of sites can be a nightmare; however, with
RMS, it is possible to configure all Teltonika
routers remotely at once!
