AEG 18SRABL 18V Compact Drill Driver User Manual

AEG 18SRABL 18V Compact Drill Driver

Overview

Remove the battery pack

Battery Status

How to use

Lock and Unlock

Handle (insulated gripping surface)

TECHNICAL DATA

• Type Right angle drill
• Production code 4759 10 01 000001-999999
• Battery voltage 18 V
• Drilling capacity in steel 10 mm
• Drilling capacity in wood 38 mm
• No-load speed, 1st gear 0-500 min-1
• No-load speed, 2nd gear 0-1900 min-1
• Max torque 42.4 Nm
• Drill chuck range 0.8 – 10 mm
• Weight without battery pack 1.0 kg
• Weight according to EPTA-Procedure 01/2014 (Li-ion 2.0 Ah … 9.0 Ah) 1.4 … 2.2 kg
• Recommended ambient operating temperature -18…+50 ºC
• Recommended battery types L18…
• Recommended charger AL18G, BL1.

Noise Information
Measured values determined according to EN 62841. Typically, the A-weighted noise levels of the tool are:

• Sound pressure level / Uncertainty LpA=71.0 dB (A) / KpA=5 dB(A)
• Sound power level / Uncertainty LWA=82.0 dB (A) / KWA=5 dB(A)

Vibration Information
Vibration total values (triaxial vector sum) determined according to EN 62841.

Vibration emission value / Uncertainty

• Drilling into metal ah=2.5 m/s2 / K=1.5 m/s2

WARNING!
The declared vibration total values and the declared noise emission values given in this instruction manual have been measured in accordance with a standardized test and may be used to compare one tool with another. They may be used for a preliminary assessment of exposure.

The declared vibration and noise emission values represent the main applications of the tool. However, if the tool is used for different applications, used with different accessories, or poorly maintained, the vibration and noise emission may differ. These conditions may significantly increase the exposure levels Over the total working period. An estimation of the level of exposure to vibration and noise should take into account the times when the tool is turned off or when it is running idle. These conditions may significantly reduce the exposure level over the total working period. Identify additional safety measures to protect the operator from the effects of vibration and noise, such as maintaining the tool and the accessories, keeping the hands warm (in case of vibration), and organizing Work patterns.

WARNING!
Read all safety warnings, instructions, illustrations and specifications provided with this power tool. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instructions for future reference.

RIGHT ANGLE DRILL SAFETY WARNINGS

SAFETY INSTRUCTIONS FOR ALL OPERATIONS
Hold the power tool by insulated gripping surfaces, when performing an operation where the cutting accessory or fasteners may contact hidden wiring. Cutting accessories or fasteners contacting a “live” wire may make exposed metal parts of the power tool “live” and could give the operator an electric shock.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS

• Never operate at higher speed than the maximum speed rating of the drill bit. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Always start drilling at low speed and with the bit tipin contact with the workpiece. At higher speeds, the bit is likely to bend if allowed to rotate freely without contacting the workpiece, resulting in personal injury.
• Apply pressure only in direct line with the bit and do not apply excessive pressure. Bits can bend causing breakage or loss of control, resulting in personal injury.

ADDITIONAL SAFETY AND WORKING INSTRUCTIONS

Clamp the workpiece with a clamping device. Unclamped Workpieces can cause severe injury and damage. The product will restart automatically if staled. Turn off the product immediately if it stalls. Do not turn on the product again while it is still stalled, as doing so could trigger a sudden recoil with a high reactive force. Determine why the product stalled and rectify this, paying heed to the safety instructions. The dust produced when using the product may be harmful to health. Do not inhale the dust. Wear a suitable dust protection mask. Remove the battery pack before starting any work on the product.

SPECIFIED CONDITIONS OF USE
The right-angle drill is intended for drilling and driving screws. Do not use the product for any other purpose.

ADDITIONAL BATTERY SAFETY WARNINGS

WARNING!
To reduce the risk of fire, personal injury, and product damage due to a short circuit, never immerse your tool, battery pack, or charger in fluid or allow fluid to flow inside them. Corrosive or conductive fluids, such as seawater, certain industrial chemicals, and bleach or bleach-containing products, etc., can cause a short circuit.

Do not dispose of used battery packs in the household refuse or by burning them. AEG distributors offer to retrieve old batteries to protect our environment Use only AEG chargers for charging AEG battery packs. Do not use battery packs from other systems. Never break open battery packs and chargers, and store them only in dry rooms. Keep battery packs and chargers dry at all times. Battery packs that have not been used for some time should be recharged before use.

Temperatures in excess of 50°C (122° F) reduce the performance of the battery pack. Avoid extended exposure to heat or sunshine (risk of overheating). The contacts of chargers and battery packs must be kept clean. For an optimum lifetime, the battery packs have to be fully charged after use. To obtain the longest possible battery life, remove the battery pack from the charger once it is fully charged.

For battery pack storage longer than 30 days:

• Store the battery pack where the temperature is below 27°C and away from moisture.
• Store the battery packs in a 30% -50% charged condition.
• Every six months of storage, charge the pack as normal.

BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being Overloaded and helps to ensure long life. Under extreme stress, the battery electronics turn off the product automatically. To restart, turn the product off and then on again. If the product does not start up again, the battery pack may have discharged completely. Recharge the battery pack.

TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation requirements.

Transportation of those batteries has to be done in accordance with local, national, and international provisions and regulations.

• Batteries can be transported by road without further requirement.
• Commercial transport of lithium-ion batteries by third parties is subject to Dangerous Goods Regulations. Transport preparation and transport are exclusive to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.

When transporting batteries:

• Ensure that the battery contact terminals are protected and insulated to prevent short circuits.
• Ensure that the battery pack is secured against movement within the packaging.
• Do not transport batteries that are cracked or leaking
• Check with the forwarding company for further advice.

MAINTENANCE

Use only AEG accessories and spare parts. Should components that have not been described need to be replaced, contact one of our AEG service agents (see our list of guarantee/service addresses).

If needed, an exploded view of the product can be ordered. State the product type and the serial number printed on the label, and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth- Straße 10, 71364 Winnenden, Germany.

SYMBOLS

• Read the instructions carefully before starting the product.
• CAUTION! WARNING! DANGER!
• Remove the battery pack before starting any work on the product.
• Wear eye protection.
• Wear ear protectors.
• Wear a suitable dust protection mask.
• Wear protective gloves.
• Do not dispose of electric tools, batteries/rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.
• No-load speed
• Volts
• Direct current
• European Conformity Mark
• Ukraine Conformity Mark
• EurAsian Conformity Mark

Techtronic Industries GmbH
Max-Eyth-Straße 10 71364 Winnenden Germany
(01.22)
961096809-02A

AEG is a registered trademark used under license from AB Electrolux (publ).

EC-DECLARATION OF CONFORMITY

We declare as the manufacturer under our sole responsibility that the product described under Technical Data fulfills all the relevant provisions of the following European Directives, European Regulations and harmonised standards.1
Authorised to compile the technical file.2

Techtronic Industries GmbH
Max-Eyth-Straße 10, 71364 Winnenden, Germany
1 2011/65/EU (RoHS)
2014/30/EU
2006/42/EC
EN 62841-1:2015
EN 62841-2-1:2018+A11:2019
EN IEC 55014-1:2021
EN IEC 55014-2:2021
EN IEC 63000:2018
Todd Chipner
Vice President, Quality – Asia
Winnenden, 2021-11-30
2 Alexander Krug, Managing Director
Techtronic Industries GmbH
Max-Eyth-Straße 10,
71364 Winnenden,
Germany

Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
www.aeg-powertools.eu

References

• AEG - AEG Powertools

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>