VOLTAS IT OBDELEVEN2 Smart Diagnostic Tool for Understanding and Improving Vehicle Instructions
- June 6, 2024
- VOLTAS IT
Table of Contents
VOLTAS IT OBDELEVEN2 Smart Diagnostic Tool for Understanding and
Improving Vehicle
IMPORTANT SAFETY INSTRUCTIONS
- Do not disassemble the device! Any changes or modifications could void the warranty and user’s authority to operate this equipment.
- All wireless data transferring devices produce interference that may affect other devices which are placed nearby.
- Do not use OBDeleven if it distracts driver or causes inconvenience due to OBD II placement. Device must not interfere with driving or driver.
- Please consult representatives of your vehicle model regarding OBD II location on your vehicle. In case you are not sure of proper connection, please consult qualified personnel.
- The device is susceptible to water and humidity.
ATTENTION! The device uses SELV limited power source. The nominal voltage is 12 V DC. The allowed range of voltage is 10 V…30 V DC.\
READ THE FULL MANUAL
TROUBLESHOOTING TIPS
https://obdeleven.com/faqs
WARRANTY
https://obdeleven.com/warranty
FCC REGULATIONS
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment.
The antenna(s) used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter and must be installed to provide a separation distance of at least 20cm from all persons. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. This device complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>