BOULT Z60 Pro Plus Calling Mic User Guide
- June 13, 2024
- BOULT
Table of Contents
BOULT Z60 Pro Plus Calling Mic
Know your Z60
OVERVIEW
What’s in the box?
- Charging Case
- Earbuds
- Type C Charging cable
- Extra pair of ear tips
- Warranty Card
Product specification
- Product Name – TWS Bluetooth Headset
- Model – Boult Audio AirBass
- Bluetooth Version – V5.3
- Speaker – 13mm
- Bluetooth Range – ~10m/33ft (without any obstacles)
- Earbud Charging Time – 40 mins
- Frequency Range – 20Hz – 20KHz
- Technology – HFP/HSP/A2Dp/AVRCP
- Input – DC5V = 1A
How to use your Z60?
Touch Controls
- The Touch Area (Multi-Functional Touch Panel) is located in the upper part of the earbuds handle.
- Wearing Earbuds
- The earbud marked with L is worn on the left ear and the earbud marked with R is worn on the right ear
Power ON/OFF:
- Power ON: Auto: Open the charging case and take out the earbuds to Power ON. Manually: Tap and hold the multifunction button (MFB) for 3 seconds.
- Power OFF: Auto: Place both the earbuds in the charging case, close the lid. Manually: Tap and hold the multifunction button (MFB) for 5 seconds.
Play Pause
Tap the MB once
Previous Track
Double Tap the left MB
Next Track
Double Tap the right MB
Voice Assistant
Long Press the MB for 2s
Volume +
Triple Tap the right MB
Volume –
Triple Tap the left MFB
Answer the Call
Tap the MFB once
End Call Reject
Double Tap the MFB
Pairing
Open the charging case, and take out the earbuds, earbuds will pair
automatically, one of the earbuds flashes blue the other earbud light goes
out.
Activate Bluetooth on the device, turn on Bluetooth, search for pairing name
“Boult Audio Airbass” and click on it.
Bluetooth Lost: Turn off mobile phone’s Bluetooth, earbuds will enter pairing
mode and can pair with other devices.
If the connection range is exceeded, the earbuds will enter the back
connection mode. No connection within 5 minutes, the earbuds will turn off.
Reset
If your earbuds fail to pair, or only one works, reset them.
Delete all “Boult Audio Airbass” Bluetooth records on the phone and turn off
Bluetooth.
Put earbuds in the charging case and then take out to pairing modes, tap L& 5
times simultaneously, hear “DU” prompt voice to clear all pairing.
Put earbuds back into the charging case.
Voice Prompts
- You will hear ‘power on” when the headset powers on.
- You will hear ‘power off’ when the headset powers off.
- You will hear ‘connected’ when the headset is paired.
- You will hear ‘low battery’ when the headset is in low power status
Maintenance Instructions
Warranty is valid/invalid only basis of the below criteria:
The product should be purchased through legal and formal channels to be
applicable for warranty.
Damaging the product intentionally/unintentionally, or due to natural
disasters, etc. is not covered in the warranty.