MEAN WELL XLG-50 50W Constant Power Mode LED Driver Instruction Manual
- June 4, 2024
- MEAN WELL
Table of Contents
- 50W Constant Power Mode LED Driver
- Features
- Applications
- GTIN
- Description
- Model Encoding
- SPECIFICATION
- Block Diagram
- DRIVING METHODS OF LED MODULE
- DIMMING OPERATION
- OUTPUT LOAD vs TEMPERATURE
- POWER FACTOR (PF) CHARACTERISTIC
- LIFETIME
- Mechanical Specification
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)
XLG-50 50W Constant Power Mode LED Driver
Instruction Manual
50W Constant Power Mode LED Driver
http://www.meanwell.com.cn/Upload/PDF/LED_EN.pdf
Features
- Constant Power mode output
- Metal housing design with functional Ground
- Built-in active PFC function
- Class 2 power unit
- No load / Standby power consumption <0.5W
- IP67 rating for indoor or outdoor installations
- Function options: output adjustable via potentiometer 3 in 1 dimming function (Dim to off and Isolation design)
- Typical lifetime>50000 hours
- 5 years warranty
Applications
- LED street lighting
- LED architectural lighting
- LED bay lighting
- LED floodlighting
- Type “I-IL” for use in Class I, Division 2 hazardous (Classified) location.
GTIN
- CODE MW Search
- tans WAVI rnearrall.com seraeGTIN as
Description
XLG-50 series is a 50W AC/DC LED driver featuring a constant power mode output. XLG-50 operates from 90-305VAC. Thanks to the high efficiency of up to 90%, The entire series is able to operate between -40 C -90 C wide case temperature range with air convection. The design of metal housing and IP67 ingress protection level allows this series to fit both indoor and outdoor applications.XLG-50 is equipped with various function options, such as dimming methodologies, so as to provide optimal design flexibility for LED lighting systems.XLG-50 series comply with the latest version of IEC61347/GB7000.1 -2015 and UL8750 international safety regulations. The output and dimming circuit are also completely in accordance with the new regulations with isolation to ensure the safety of both the user and luminaire system during installation.
Model Encoding
| Type | IP Level | Function | Note |
|---|---|---|---|
| A | IP67 | lo, adjustable through a built-in potentiometer. | In Stock |
| AB | IP67 | lo adjustable through built potentiometer | |
| 3 in 1 dimming function (0-10Vdc, 10V PWM signal, and resistance) | In Stock |
Note: India version needs MOO for production, please consult MEANWELL for detail
SPECIFICATION
| MODEL | XLG -50 |
|---|---|
| OUTPUT | RATED CURRENT (Default) |
| CONSTANT CURRENT REGION Note.2 | 22 -54V |
| RATED POWER | 100VAC – 305VAC |
50W
CURRENT RIPPLE| 5.0% max. @rated current
OPEN CIRCUIT VOLTAGE (max.)| 57V
CURRENT ADJ. RANGE| 0.53 – 2.1A
SETUP, RISE TIME Note.3| 500ms, 100ms/115VAC, 230VAC
INPUT| VOLTAGE RANGE Note.4| 90 – 305VAC 127 – 431VDC
(Please refer to the ‘STATIC CHARACTERISTIC’ section)
FREQUENCY RANGE| 47 – 63Hz
POWER FACTOR| PF 0.97/115VAC, PF? 0.95/230VAC, PF 0.921277VAC@full load
(Please refer to ‘POWER FACTOR (PF) CHARACTERISTIC’ section)
TOTAL HARMONIC DISTORTION| THD< 10%(@loadg50%1115VC,230VAC; @loadg75%1277VAC)
(Please refer to ‘TOTAL HARMONIC DISTORTION(THD)’ section)
EFFICIENCY (Typ.) Rotel 0| 90%
AC CURRENT| 0.57A/ 115VAC 0.29A/ 230VAC 0.24A/277VAC
INRUSH CURRENT(Typ.)| COLD START 50A(twidth=350ps measured at 50% Speak) at
230VAC; Per NEMA 410
MAX. No. of PSUs on 16A CIRCUIT BREAKER| 5 units (circuit breaker of type 8) 1
8 units (circuit breaker of type C) at 230VAC
LEAKAGE CURRENT| <0.75mA/ 277VAC
NO LOAD! STANDBY POWER CONSUMPTION| No load power consumption <0.5W for A,
<0.75W for I series Standby power consumption <0.5W for AB-Type(Dimming OFF)
PROTECTION| OVERPOWER| 110-150% Over Power Protection, recovers automatically
after fault condition is removed
SHORT CIRCUIT| Constant current limiting recovers automatically after the
fault condition is removed
OVER TEMPERATURE| Hiccup mode recovers automatically after the fault condition
is removed
INPUT OVER VOLTAGE Note.8| 320 – 370VAC (Shut down output voltage when the
input voltage exceeds protection voltage, recovers automatically after fault
condition is removed)
Can survive input voltage stress of 440Vac for 48 hours @ tc Mt max
ENVIRONMENT| WORKING TEMP.| Tcase=-40 – +90t (Please refer to • OUTPUT LOAD vs
TEMPERATURE’ section)
MAX. CASE TEMP.| Tcase=490t
WORKING HUMIDITY| 20 -95%
STORAGE TEMP.| -40 – +80t
TEMP. COEFFICIENT| ±o.o3%rc (0 – 60°C )
VIBRATION| 10 – 500Hz, 5G 12min.11 cycles, period for 72min. each along X, Y,
and Z axes
SAFETY &
EMC| SAFETY STANDARDS Note.8| UL8750(typelln, CSA C22.2 No. 250.13-12; ENEC
AS/NZS IEC BS EN/EN61347-1, AS/NZS BS EN/EN61347-2-13 independent, BS
EN/EN62384; IP67; GB19510.1, GB19510.14, EAC TP TC 004,J61347-1(H29),
J61347-2-13(H29),KC61347-1.KC61347-2-13,
IS15885(Part2/Sec13)( for XLG-501 type only); NOM-058-SCFI-2017 approved
---|---|---
WITHSTAND VOLTAGE| UP-0/P:3.75KVAC 1/P-FG:2.0KVAC 0/P-FG:1.5KVAC
ISOLATION RESISTANCE| I/P-0/P, I/P-FG, O/P-FG:100M Ohms / 500VDC 125 C170% RH
EMC EMISSION| Parameter| Standard| Test Level/Note
Conducted| BS EN/EN55015(CISPR15) ,GB/T17743|
Radiated| BS EN/EN55015(CISPR15) ,GB/T17743|
Harmonic Current| BS EN/EN61000-3-2 ,GB/T17625.1| Class C ©load 50%
Voltage Flicker| BS EN/EN61000-3-3|
EMC IMMUNITY| BS EN/EN61547
Parameter| Standard| Test Level/Note
ESD| BS ENIEN61000-4-2| Level 3, 81(1/ air ; Level 2, MO/ Contact
Radiated| BS ENIEN61000-4-3| Level 3
EFT/Burst| BS ENJEN61000-4-4| Level 3
Surge| BS ENIEN61000-4-5| 4KV/Line-Line 6KV/Line-Earth
Conducted| BS ENIEN61000-4-6| Level 3
Magnetic Field| BS EN/EN61000-4-8| Level 4
Voltage Dips and Interruptions| BS EN/EN61000-4-11| >95% DP 0.5 periods, 30%
dip 25 periods, >95% interruptions 250 periods
OTHERS| MTBF| 3931.6 K hrs min. Telcordia SR-332 (Bellcore) 394.6Khrs min.
MIL-HDBK-217F (25 C )
DIMENSION| 105’6310mm (Mill)
PACKING| 0.41Kg;24pcs/ 10.5Kg/0.68CUFT for A-type 0.42Kg;24pcs/ 11Kg/0.68CUFT
for AB-type
NOTE
- All parameters NOT specially mentioned are measured at 230VAC input, rated current, and 25 C of ambient temperature.
- Please refer to “DRIVING METHODS OF LED MODULE”.
- The length of setup time is measured at the first cold start. Turning ON/OFF the driver may lead to an increase in the setup time.
- De-rating may be needed under low input voltages. Please refer to the “STATIC CHARACTERISTIC” sections for details.
- The driver is considered a component that will be operated in combination with the final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again.
- This series meets the typical life expectancy of >50,000 hours of operation when Tcase, particularly@ point (or TMP, per DLC), is about 75″(; or less.
- Please refer to the warranty statement on MEAN WELL’s website at http://www.meanwell.com
- Input over-voltage only for XLG-50 I series, and I series without UUCSA certificate
- The ambient temperature derating of 3.5 C/1000m with fanless models and 5 C/1000m with fan models for operating altitudes higher than 2000m(6500ft).
- Only for XLG-50-A
- Products sourced from the Americas regions may not have the CCC/PSE/131S/KC logo. Please contact your MEAN WELL sales for more information.
- For any application note and IP waterproof function installation caution, please refer our user manual before using. https://www.meanwell.com/Upload/PDF/LED_EN.pdf
- Ripple & noise are measured at 20MHz of bandwidth by using a 12″ twisted pair-wire terminated with a 0.1 uf & 47uf parallel capacitor.
- To fulfill the requirements of the latest ErP regulation for lighting fixtures, this LED driver can only be used behind a switch without being permanently connected to the mains.
- If you need the NOM (Mexico) certificate, Please contact the MEAN WELL sales representative for details.
Product Liability Disclaimer: For detailed information, please refer to https://www.meanwell.com/serviceDisclaimeraspx
Block Diagram
DRIVING METHODS OF LED MODULE
DIMMING OPERATION
-
3 in 1 dimming function (for AB-Type)
-
Output constant current level can be adjusted by applying one of the three methodologies between DIM+ and DIM-:
0 ~ 10VDC, or 10V PWM signal or resistance. -
Direct connecting to LEDs is suggested. It is not suitable to be used with additional drivers.
-
Dimming source current from power supply: 100 A (typ.)
-
Applying additive 0 ~ 10VDC
Note
- Min. dimming level is about 8% and the output current is not defined when 0%< Iout<8%.
- The output current could drop down to 0% when dimming input is about 0kΩ or 0Vdc, or 10V PWM signal with 0% duty cycle.
OUTPUT LOAD vs TEMPERATURE
STATIC CHARACTERISTIC
※ De-rating is needed under low
input voltage.
POWER FACTOR (PF) CHARACTERISTIC
TOTAL HARMONIC DISTORTION (THD)
※ 50V Model, Tcase at 75℃
EFFICIENCY vs LOAD
XLG-50 series possess superior working efficiency that up to 90% can be
reached in field applications.
※ 50V Model, Tcase at 75℃
LIFETIME
Mechanical Specification
※ A-Type
※ AB-Type
Installation Manual
Please refer to:
http://www.meanwell.com/manual.html
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>