BEGA 50574 Ceiling and Wall Luminaire Instruction Manual

BEGA 50574 Ceiling and Wall Luminaire

Product Information

• Lamp Luminaire with screw base E 27
• Lamp output max. 100 W
• This product contains light sources of energy efficiency class E
• Luminaire efficiency: 78.5%
• Detailed technical and lighting data for the lamps can be found in the data sheets on our website
• Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
• Important: If the luminaire is to be mounted onto a metallic, electroconductive surface, it is mandatory to make sure that the mounting surface is connected conductive to the earth conductor of the luminaire!
• Luminaire with trim ring: Before installing onto the mounting surface, the luminaire housing must be inserted into the trim ring (accessory).
• Optional metal trim rings in 3 surfaces are available as accessories and must be ordered separately:
  • Edelstahl (Stainless steel) – Bestellnummer (Part. No): 13 183
  • Aluminium poliert (Polished aluminium) – Bestellnummer (Part. No): 13 184
  • Messing (Brass) – Bestellnummer (Part. No): 13 185
• Spares:
  • Spare glass – Part. No: 11 003 413
  • LED-leuchtmittel 2700 K (LED lamp 2700 K) – Part. No: 40R G 13 565
  • LED-leuchtmittel 3000 K (LED lamp 3000 K) – Part. No: 13 592
  • Fassung (Lampholder) – Part. No: 63 000 339

Product Usage Instructions

1. Dismantle the mains supply cable.
2. Unscrew the glass from the luminaire housing by turning it counter-clockwise.
3. Push silicone sleeves over the lines.
4. Make the earth conductor connection and the electrical connection.
5. Fasten the luminaire housing with the supplied fastening material or other suitable fastening material to the mounting surface.
6. Insert the lamp into the lampholder.
7. Fix the glass to the luminaire housing by turning it clockwise.

Ceiling and wall luminaire for indoor use

Instructions for use

Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass, satin matt and metal fitter, for all lighting tasks in interior applications. They are ideal for places where a soft and uniform lighting distribution is required.

• Lamp
  Luminaire with screw base E 27
  Lamp output max. 100 W
  This product contains light sources of energy efficiency class E

• Supplied lamp
  BEGA LED lamp 13565
  LED Retrofit 12 W · 1400 lm · 2700 K dimmable

• Supplied lamp
  BEGA LED lamp 13592
  LED Retrofit 12 W · 1400 lm · 3000 K dimmable
  Luminaire efficiency: 78.5%
  Detailed technical and lighting data for the lamps can be found in the data sheets on our website.

Product Description

• Luminaire made of aluminum alloy Finish Colour white Hand-blown opal glass,  satin matt, with screw neck 2 mounting holes ø 5.4 mm  Distance apart 93 mm
• The luminaire is suitable for through-wiring. Mains cable up to ø 10.5 mm max. 3 x 1.5@ Connecting terminals  and earth conductor terminal 2,5@ Lampholder E 27
• Safety class I
• Impact strength IK05
• Protection against mechanical
• impacts < 0.7 joule
• Safety mark
• Conformity mark
• Weight: 1.8 kg

Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Please note:
If the luminaire is to be mounted onto a metallic, electroconductive surface, it is mandatory to make sure that the mounting surface is connected conductive to the earth conductor of the luminaire!

Luminaire with trim ring:
Before installing onto the mounting surface the luminaire housing must be inserted into the trim ring (accessory).

Installation

• Dismantle the main supply cable.
• Unscrew the glass from the luminaire housing by turning it counterclockwise.
• Push silicone sleeves over the lines.
• Make the earth conductor connection and the electrical connection.
• Fasten the luminaire housing with the supplied fastening material or other suitable fastening material to the mounting surface.
• Insert the lamp into the lamp holder.
• Fix the glass to the luminaire housing by turning it clockwise.

Relamping  Maintenance

1. Disconnect the electrical installation.
2. Unscrew glass from luminaire housing.
3. Clean luminaire and glass.
4. Use only solvent-free cleansers.
5. Change the lamp.
6. Screw glass into luminaire housing.

Accessory  Trim rings

For this luminaire metal trim rings in 3 surfaces are optional available. Trim rings are accessories and must be ordered separately.

• Stainless steel: 13 183
• Polished aluminum: 13 184
• Brass: 13 185

Spares

• Spare glass 11: 003 413 40R G
• LED lamp: 2700 K 13 565
• LED lamp: 3000 K 13 592
• Lampholder: 63 000 339

BEGA Gantenbrink-Leuchten KG · Postfach 31 60 · 58689 Menden · info@bega.com · www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>