Hanwha Vision SBP-390WM2 Wall Mount Adaptor User Manual
- June 13, 2024
- Hanwha Vision
Table of Contents
Hanwha Vision SBP-390WM2 Wall Mount Adaptor
Product Information
The Wall Mount Adaptor (SBP-390WM2) is available in two colors: Ivory (SBP- 390WM2(IVORY)) and White (SBP-390WMW2(WHITE)). It is designed to be used for installing the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure. The package includes the Wall Mount Adaptor and 4 anchor bolts.
Product Usage Instructions
- Pull out the external power cable, BNC cable, and communications cable (for connecting to the camera) through the rear of the Wall Mount Adaptor into the Pipe. It is recommended to keep the cables at a distance of about 100mm from the pipe.
- Secure the Wall Mount Adaptor to the wall, corner, or pole using the Anchor Bolts or Nuts (M10). If installing on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
- Mount the Camera set on the Pipe and install the camera according to the camera’s installation guide.
Installation Precautions:
- Make sure that the installation place can endure at least 4 times the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- The Wall Mount Adaptor can be installed directly on the wall.
Caution for water prevention
Ensure that the cables are properly sealed to prevent water ingress.
Product Specifications
- Product Outline: mm[inch]
- Cables: PT01-005452C
Package
Product Overview
This product is used to install the Smart Dome Camera and Anti Vandal Camera on a wall or vertical structure.
Installation Precautions
- Make sure that the installation place can endure at least 4 times of the total weight of the Wall Mount Adaptor, Hanging Mount Adaptor, and Camera.
- This product is designed to use M10 Anchor Bolts (Nuts) for the installation.
- For a concrete wall, it is recommended to use M10 Anchor Bolts (Nuts) along with plain and spring washers.
- Each anchor bolt must be capable of withstanding an extraction force of 700 kg.
- When installing the product outdoors, use interlocking devices made of stainless steel.
- Wall mount adaptor can be installed directly on the wall.
Installation
- Pull out the external power cable, BC cable and communications cable (for connecting to the “camera*”) through the rear of the Wall Moun Adaptor into the Pipe.
- Then, it is recommended to keep the cables in a distance of about 100 mm from the pipe.
- Secure the Wall Mount Adaptor to the wall, corner or pole using the Anchor Bolts or Nuts (M10)*.
- When installing the product on a wall, mark and drill 4 holes into the Wall Mount Adaptor and insert the Anchor Bolts or Nuts (M10) before installation.
- Mount the Camera set on the Pipe.
- Install the camera according to the camera’s installation guide.
Caution for water prevention
Product Specifications
- Weight: 1.79 kg
- Material: Aluminum
- Operation temp.: -50°C~60°C
- Operation hum.: 0-100%
Product Outline
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>