Aladdin ALL-WDIM Bi Color 20w RGB Kit User Manual
- June 1, 2024
- ALADDiN
Table of Contents
Aladdin ALL-WDIM Bi-Color 20w RGB Kit
Technical Specifications
- Light Source: 50W Bi-Color / 20W RGB LEDs
- CRI (Color Rendering Index): Ra 98
- TLCI (Television Lighting Consistency Index): 98
- Color Temperature: 2200K – 12000K
- Beam Angle: Adjustable
- Dimmer: Built-in
Product Usage Instructions
Start-Up Guide
- Unpack your panel and accessories from the box.
- Plug in your AC adapter or D-Tap cable to the input box of the panel.
- If needed, use the included extension cable.
- Connect the AC adapter to the power outlet.
- If using optional attachments, connect them accordingly.
- Ensure batteries can handle a power draw of 70 watts.
Using the App
Download the app for smartphones to control your light conveniently. Store custom color filters, adjust RGB/Bi-Color values, and more for enhanced control over lighting effects.
Warranty Information
We offer a one-year warranty covering repairs or replacements for faulty products. After the warranty period, repairs are available at an extra charge. Warranty exclusions apply in specific cases.
Selected Optional Accessories
- ALL-WDIM : Controller for enhanced control over RGB/Bi-Color values and effects.
- 1X1-FR-KIT : Frame with ball head and diffuser for easy installation.
- 1X1-BALL : Aladdin Ball with a diffuser for softer lighting.
FAQ
- Q: How do I switch between RGB and Bi-Color controls?
- A: You can switch between RGB and Bi-Color controls using the designated control on the back of the panel.
- Q: Can I use the ALL-IN ONE without an AC adapter?
- A: Yes, you can also power the panel using a D-Tap cable, ensuring it meets the power requirements.
- Q: What is the recommended battery specification for the ALL-IN ONE?
- A: For a 70W power draw, we recommend batteries rated at 14.8V and a minimum working current of 4.7A.
START-UP GUIDE
Unpack your panel and accessories from the box. The panel features a built-in dimmer unit which can be controlled on the back of the panel. Plug in your AC adapter or D-Tap cable to the input box of the panel. If the cable is too short, just use the included extension cable in between. When you connect the AC adapter to the power outlet you’re ready to go.
If you have also purchased the optional DMX Attachment (ALL-DMXAT) or the
Wired Dimmer (ALL-WDIM) you can put them between the panel (or extension
cable) and the AC adapter (or D-Tap cable).
Just note that you need batteries which can handle the power draw of 70 watts
from the panel. There’s a simple calculation for that:
If you are using 14.8V batteries you need at least a working current of 4.7A.
If your battery is rated at 14.8V and 100Wh/6.8Ah you can run your ALL-IN TWO
for more than one hour.
For any further questions about using our products please refer to our cus-
tomer service or watch the instructional videos on www.aladdin-lights.com or
YouTube.
DOWNLOAD THE APP
Using your ALL-IN panel with the new app for smartphones is a convenient way of controlling your light. It is available as free download on Android and iOS. You can store your own color filters in the app by dialling the de-sired RGB / Bi-Color values, have more control over the hues and saturation of lighting effects and much more. Give it a try and you will be amazed about the convenience in your workflow. Find the QR codes for direct download below.
IMPORTANT CAUTIONS AND WARNINGS
- Do not use near flammables and heaters.
- Do not expose the unit to direct sunlight for a long period (this applies also for storing in a car).
- Do not use the dimmer wire or extension wire to hang or mount the panel.
- Do not bend or fold the panel more than 90 degrees.
- Do not tape directly on the LEDs of the panel – they can burn out.
- Do not damage the product with improper force or cause any impact with heavy objects.
- Do not cut the panel with sharp objects.
- Keep out of reach of children.
- The panel will heat up when running a long period of time on 100% power, make sure to have it in your eyesight at all times. Use the X-BEND holder or frame to ensure enough air flow for heat reduction.
- Use the product only within the temperature range of -10°C – +40°C.
- Make sure the panel has cooled down before storing it in the pouch or any other case.
- When you have technical problems while using the product, stop using it immediately and contact your dealer/reseller.
WARRANTY
We provide a one-year warranty period after the purchase. This warranty covers
repairs or a replacement for faulty products within this period. After this
warranty has been expired, you can still get repairs for your product which
will be charged extra.
Aladdin Lights reserves the right to refuse warranty service on products under
disputable conditions.
WARRANTY EXCLUSIONS
In case of any of the below-listed causes, the warranty does not apply, even if it is within the free warranty period.
- Product failure due to consumer negligence.
- Product failure due to usage of not compatible power sources.
- Product failure due to disassembly by not official resellers/distributors.
SELECTED OPTIONAL ACCESSORIES
TECHNICAL SPECIFICATIONS
| Light source | 50W Bi-Color / 20W RGB LEDs |
|---|---|
| CRI | Ra 98 |
| TLCI | 98 |
| Color temperature | 2200K – 12000K |
| Beam angle | 140° |
| Dimmer | Dimming: (1%–100%) |
| Cooling | Passive cooling |
| Dimmer input | 12V to 15V DC |
| Power unit input | Automatic voltage 100V to 240VAC |
| Power consumption | 70W |
| **** Dimensions | 300mm (W) x 300mm (H) x 18mm (w/ built-in dimmer) |
| Weight | |
| Connection | Bluetooth / Connector plug |
| UV radiation | none – 90 % Cutoff |
| Temperature range | -10°C – +40°C |
| DMX512 support | With optional DMX attachment/controller |
| DMX512 | 2 Channels – White Bi-Color 3 Channels – RGB |
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>