CAT D7E Track Type Tractor Instruction Manual

CAT D7E Track-Type Tractor

OVERVIEW

INDICATOR LIGHT STATUS AT THE TIME OF CHARGING

Package includes

1. Truck, Controller,
2. USB charger with cable,
3. Two AAA batteries, a Lithium battery,
4. Window box package

CHARGING METHODS

Connect the white port of Li-Po to USB charging port, as shown in the Figure, and ensure the port can be connected tightly and correctly, then insert the USB charging plug into the power adapter, and perform charging

BATTERY / USB PARAMETERS

1. Battery specifications:
2. 18650
3. 7.4V 600mAh Li-Po
4. Intelligent USB balance charger with overcharge prtection
5. Input: 5.0V 1-2A
6. Data change in Battery/USB PARAMETERS:
7. Output: DC 4.2V, 800mA

Precautions Of Li-Po Batteries

1. The battery can be charged only by the originally configured USB charger lead.
2. Be sure to charge with the white Big socket port, not the yellow socket.
3. 7.4V 600mAh Li-Po must be equipped with 5V USB charging plug.
4. Any Li-Po battery with a damaged appearance should NOT be charged to avoid fire hazards from spontaneous combustion.
5. The battery should be charged according to the specified charging time period.

CAT official licensed product realistic full working functions (individual operations of bucket stick-arm & boom-arm, powerful excavation actions by leadscrew transmission), high qualty steel gears for durable life, realistic light & sound effect, upper-body can rotate 360 degrees.

FEATURES

1. Frequency 2.4 GHz
2. Maximum number of users/machines without interference 12
3. Controller Working Range 35M
4. Max. speed (km/h) 0.8 km/h
5. Scale 1:24
6. Max. play time 50-65 min.
7. Charging time 120 min.
8. Charger 1A, USB cable
9. Rechargeable Battery 1×7.4V 600mAh
10. Controller Battery  AAA size x 2
11. Product Weight (Bucket, exclude battery)  1035 g
12. Dozer Blade Loading max. 0.6 kg/1.32 lbs

Safe Usage Instructions for Li-Po Batteries

1. Li-Po batteries pose a higher danger compared with other batteries.
2. This company does not bear any responsibility for resulting improper usage.
3. DO NOT attempt to charge the Li-Po battery with any charger other than the included original charger. Failure to do so may result in an explosion or fire. DO NOT dismantle, subject to impact, incinerate or reverse the connections of the battery. Avoid metal objects impacting the positive and negative polarities of the battery. Please prevent sharp objects from penetrating the battery to avoid the potential of fire.
4. Please use caution when charging the battery and ensure charging occurs in a visible area. DO NOT leave the battery unattended while charging.
5. Battery should be kept out of reach of children to avoid any injury.
6. A degraded battery should not be attempted to be recharged. Battery expansion, deformation, explosion or fire may occur.
7. Degraded batteries should be disposed of properly following regional or national disposal guidelines to ensure the protection of the environment.

WARNING

1. This product contains small parts and is not intended for children under the age of 8.
2. The remote control requires 2 X 1.5V AAA non-rechargeable batteries and the RC model requires a 7.4 V 600mAh Li-Po battery (included) The RC model motor can generate heat and should not be touched to avoid possible burns.
3. Periodically check the wire, plug, shell, and other parts of the charger for wear or damage and discontinue use if detected until repaired or replaced.
4. The RC model should only be charged using the recommended guidelines.
5. The LEDs (Light Emitting Diodes) can emit radiation and should not be pointed directly at the eyes.
6. Aviation restrictions forbid the use of Radio Control devices within a radius of 3 miles or 5000 meters from any airport runway or facility.

IMPROPER USE OF THIS PRODUCT

Do not dismantle, modify or otherwise alter the operation of this product in any manner. Do not operate this product in an unlawful or illegal manner or as to jeopardize the safety of the operator or others.

FCC STATEMENT

This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1) this device may not cause harmful interference, and 2) this device must accept any interference received, including interference that may cause undesired operation.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void your authority to operate the equipment. The device has been evaluated to meet general RF exposure requirements, the device can be used in portable exposure conditions without restriction.

ISED Statement

This device complies with Industry Canada licenseÿexempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation of the device. The digital apparatus complies with Canadian CAN ICES-3 (B)/NMB-3(B). This radio transmitter (ISED certification number: 25977-25002) has been approved by Industry Canada to operate with the antenna types listed with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.

FUNCTION INTRODUCTION OF REMOTE CONTROL

INSTALLATION OF REMOTE CONTROL MODEL BATTERY

The model is equipped with a 7.4V 600mAh Li-Po battery (included). First, twist the buckle to open the battery cover, then correctly connect the battery following the diagram. Place the battery into the compartment. Close the battery cover and twist the buckle to lock the cover. Tighten the cover screw to avoid children’s easy access.

INSTALLATION OF REMOTE CONTROL BATTERY

The remote control requires 2 X 1.5V AAA non-rechargeable batteries. Open the battery cover by loosening the cover screw. Place the batteries into the compartment observing the correct polarity. Replace the battery cover and tighten the cover screw.

Battery Installation Instructions

1. Remove the rechargeable battery from the package and install it correctly in the machine following included guidelines.
2. The rechargeable battery should be removed from the machine before recharging.
3. Recharge battery only under adult supervision.
4. Do not use rechargeable AAA batteries in the remote control
5. Do not combine old and new AAA batteries in the remote control.
6. Use the same type or brand of new AAA batteries in the remote control
7. Place AAA batteries in the remote control observing the correct polarity
8. Use caution to avoid short-circuiting the battery terminals in the remote control

DOZER BLADE AND BODY CONTROL

MODEL DRIVING CONTROL

REMOTE CONTROL FREQUENCY PAIRING AND POWER ON

This product is equipped with remote control with a frequency of 2.4GHz. When a user operates the product for the first time, please install batteries into the model and the remote control. Then power on the unit, then the remote control. A series of beeps will indicate that the frequency pairing has been completed and the model is ready to operate.

LIGHT AND SOUND CONTROL

The operating model can generate lights and sounds. Press the sound switch to turn on the lights and sounds, press the switch again to turn them off. We reserve the right to make technical and design-related changes

Diecast Masters scale models are adult collectibles, not toys. Not intended for children under 8.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>