GERBER D300918T Two Handle Roman Tub Trim Kit Installation Guide

June 13, 2024
Gerber

GERBER D300918T Two Handle Roman Tub Trim Kit Installation Guide
GERBER D300918T Two Handle Roman Tub Trim Kit

Faucet Installation Procedures

This product might be required to be installed with an automatic temperature compensating device to reduce the risk of scalding and thermal shock. Check with the local plumbing code requirements before installation.

The product should be installed by a local licensed plumber.
Faucet Installations

Tools You Will Need

  • Adjustable wrench

  • Pipe tape

  • Electric drill

  • Phillips screwdriver

  • Silicone sealant

  • Allen wrench

Maintenance Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.

Warranty Registration: Please log on to gerber-us.com to register your product today.

Shut off the main water supply before installation by turning the valves clockwise.
Faucet Installation Procedures

SPOUT INSTALLATION

Remove the caps and plug from the rough in assembly
Faucet Installation Procedures

Drill a 1/4″ (6mm) hole about 3/4″ (20mm) into the deck. If the spout assembly includes a spout escutcheon, place the spout escutcheon on over the spout tube hub. Orient the spout escutcheon so that the small hole is directly in line with the direction of the spout.
Faucet Installation Procedures
Faucet Installation Procedures

If the spout assembly includes a spout escutcheon, lift the escutcheon first. Using the supplied Allen Wrench, back out the set screw a few turns. Place the spout over the spout hub with the pin at the spout fits in the pre-drilled hole on the deck and then tighten the set screw. Finish installation by inserting the set screw hole cover into the access hole in the back of the spout. Lowering the spout escutcheon if one is supplied.
Faucet Installation ProceduresFaucet Installation
Procedures

HANDLE ASSEMBLY INSTALLATION

Screw the escutcheon onto the valve body until it is flush with deck. Insall the handle, and tighten screw to the valve stem
Faucet Installation Procedures

Note that some models have set screw on side of handle

Turn on the water and test for leaks.
Faucet Installation Procedures

Diverter Replacement

Shut off the main water supply before installation by turning the valves clockwise.
Faucet Installation Procedures

Loosen set screw by using the 3/16” Allen Wrench; remove the spout and spout escutcheon (if one is supplied) from the spout hub assembly.
Diverter Replacement

Use an adjustable wrench to remove the spout hub assembly.
Diverter Replacement

Remove the diverter tube from the spout tube using the provided tool.
Diverter Replacement

Insert the replacement diverter assembly into the spout tube. Press down firmly to assure proper seating. Reinstall the spout hub assembly.
Diverter Replacement

Place the spout and spout escutcheon if one is supplied onto the spout hub. Please note that the spout pin must be aligned with the hole of the spout base ring. Finish installation by tightening the set screw and installing the set screw hole cover into the access hole in the back of the spout.
Diverter Replacement

Handle Assembly Installation

Type 1:
Attach the handle assembly towards the cartridge stem. Tighten the set screw on the bottom, install the set screw cap.
Assembly Installation
Assembly Installation

Type 2:
Attach the handle assembly towards the cartridge stem. Rotate the handle assembly clock wise to tighten it
Assembly Installation

Type 3:
Attach the handle assembly towards the cartridge stem. Tighten the screw clock wise, install the handle cap.
Assembly Installation

Type 4:
Remove the hex screw behind the handle level. Remove the handle level accordingly, tighten the screw on the adapter
Assembly Installation

Maintenance Your new faucet is designed for years of trouble-free performance. Keep it looking new by cleaning it  periodically with a soft cloth. Avoid abrasive cleaners, steel wool and harsh chemicals as these will dull the finish and void your warranty.

Warranty Registration : Please log on to gerber-us.com to register your product today

Need Help? In USA Please call our toll-free Customer service line at 1-888-328-2383 or WWW.GERBER- US.COM for additional assistance or service.

In CA Please call our toll-free Customer service line at 1-800-487-8372 or WWW.GERBER- CA.COM for additional assistance or service.

GERBER Logo

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals