BEGA 24503 Wall Luminaire Instruction Manual

BEGA 24503 Wall Luminaire

Product Information

Product Usage Instructions

1. Application: The Wandleuchte Wall luminaire Applique is designed for wall mounting and provides directed light.
2. Dark Sky: This luminaire evenly directs its light onto the surface to be illuminated and emits less than 1% of the luminaire luminous flux into the upper halfspace of the luminaire.
3. Overvoltage Protection: The electronic components in the luminaire are protected against overvoltage according to DIN EN 61547. For additional protection against transients, it is recommended to use separate overvoltage protection components available on the manufacturer’s website.
4. Safety: Installation and operation of this luminaire must comply with national safety regulations. Only qualified electricians should carry out the installation and commissioning. The manufacturer does not accept liability for damage caused by improper use or installation. Any modifications made to the luminaire should be done by a responsible person who will be considered the manufacturer.
5. Installation: When installing or replacing components, avoid touching the light output opening of the LED directly. Place the enclosed desiccant pouch in the luminaire to ensure maximum service life of the electrical components. Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label before closing the luminaire.
6. Earth Conductor Connection: Make sure to establish an earth conductor connection between the luminaire top and base. Ensure that the gasket is positioned correctly. Install the luminaire top, press-on, and manually tighten screws evenly.

DIMENSION

Application

Wall luminaire with directed light.

Product Description

• Luminaire made of aluminium alloy, aluminium and stainless steel
• BEGA Unidure® coating technology
• Clear safety glass
• Silicone gasket
• Reflector made of pure anodised aluminium
• 2 mounting holes ø 4.5mm
• Distance apart 50mm
• 2 cable entries for through-wiring of mains supply cable ø 7-10.5mm
• Connection terminal 2.5@
• Earth conductor connection
• BEGA Ultimate Driver®
• LED power supply unit
• 220-240 V ∼ 0/50-60 Hz
• DC 176-264 V
• BEGA Thermal Switch®
• Temporary thermal shutdown to protect temperature-sensitive components
• Safety class I
• Protection class IP 64
• Dust-tight and protection against splash water Impact strength IK07
• Protection against mechanical
• impacts < 2 joule
•  Safety mark
•  Conformity mark
• Weight: 0.4 kg
• This product contains light sources of energy efficiency class(es) D, E
• Dark Sky
• The light from this luminaire is directed evenly and highly efficiently onto the surface to be illuminated and emits less than 1% of the luminaire luminous flux into the upper half space of the luminaire.

Safety

• The installation and operation of this luminaire are subject to national safety regulations.
• Installation and commissioning may only be carried out by a qualified electrician.
• The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage Protection

• The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
• To achieve an additional protection against e.g. transients, etc. we recommend separate overvoltage protection components.
• You can find them on our website at www.bega.com.

PRODUCT SPECIFICATION

• Lamp
  • Module connected wattage 4 W
  • Luminaire connected wattage 5.1 W
  • Rated temperature ta=25 °C
  • Ambient temperature ta max=45 °C
• 24 501K3
  • Module designation LED -0734/830
  • Colour temperature 3000 K
  • Colour rendering index CRI >80
  • Module luminous flux 580 lm
  • Luminaire luminous flux 342 lm
  • Luminaire luminous efficiency 67,1 lm/W
• 24 501K4
  • Module designation LED-0734/840
  • Colour temperature 4000 K
  • Colour rendering index CRI >80
  • Module luminous flux 620 lm
  • Luminaire luminous flux 366 lm
  • Luminaire luminous efficiency 71,8 lm/W

Installation

• Lead the mains supply cable through the cable entry of the luminaire base.
• LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
• Note position of application of the luminaire “arrow down”.
• Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface.
• Be sure to use the gasket rings supplied.
• Make earth conductor connection.
• Push silicone sleeves over the lines and make electrical connection.
• In order to guarantee the maximum service life of the electrical components, the enclosed desiccant pouch must be placed in the luminaire.
• Remove the desiccant pouch from the foil packaging and place it in the position marked by the red information label immediately before finally closing the luminaire.
• Make earth conductor connection between luminaire top and luminaire base.
• Make sure that gasket is positioned correctly.
• Install the luminaire top, press-on and manually tighten screws evenly.

Cleaning · Maintenance

• Clean luminaire regularly with solvent-free cleansers from dirt and deposits.
• Do not use high pressure cleaners.

Replacing the LED module

• The designation of the LED module is noted on a label in the luminaire.
• The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
• The module can be replaced by qualified persons using standard tools.
• Disconnect the system and open the luminaire.
• Please follow the installation instructions for the LED module.
• Inspect and, if necessary, replace the luminaire gaskets.
• Defective glass must be replaced.
• Close the luminaire.

Spares

• Spare glass 14 000 787
• LED power supply unit DEV -0303/350
• LED module 3000 K LED -0734/830
• LED module 4000 K LED -0734/840
• Reflector 76 000 949
• Gasket 83 001 223

Customer Support

• BEGA Gantenbrink-Leuchten KG
• Postfach 3160
• 58689 Menden
• info@bega.com
• www.bega.com

References

• BEGA · Das gute Licht.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>