Xblitz PARK VIEW ULTRA Full Rear View Mirror Dashcam with Backup Camera User Manual

Xblitz PARK VIEW ULTRA Full Rear View Mirror Dashcam with Backup Camera

BEFORE FIRST USE

1.  It is recommended to use brand microSD memory cards class 10th (8 – 256GB capacity).
2. Before inserting the card into the car camera it is recommended to format it to the FAT32 file format in the PC, and than in the recorder.
3.  Memory card should be installed when the device is turned o , otherwise the memory card and the device may be damaged. The same refers to putting the memory card out of the device.
4. A fully charged battery lets the camera record video with no power supply for maximally 5 minutes. The battery’s primary purpose is ensuring that the device’s settings won’t be reset due to lack of power.
5. When the memory card is full, the oldest, unprotected files will be overwritten.
6.  It is recommended to use the product’s features with their intended use, e.g. Motion detection or parking mode during driving should be turned o , as it may cause automatic turning on / o the recording.
7. Sound: the device has a capacitive microphone, which records all the sounds from the surrounding. The sounds may overlap causing distortions.

THE SET CONTAINS

1.  Car camera Xblitz Park View Ultra
2. Car charger
3.  Mounting rubbers x 2
4.  Rear camera
5. Memory card reader
6.  Rear camera wire
7.  USB wire

CAMERA INSTALLATION

1. Insert the memory card into the recorder.
2.  Put the camera onto the rear mirror.
3. Mount the camera using the included rubbers.
4. Run the powering wire and the rear camera wire.
5. Connect the powering wire and the rear camera wire.
6. Connect the power adapter into the car cigarette lighter socket.

The place of additional camera installation, added to the set depends on your predispositions. The camera meets the IP67 standards (resistant to weather conditions).
Additional camera installation: Black wire connect to the micro USB slot in the main device, run it to the place chosen for the rear camera installation and connect it. Make sure that the main device is able to read the rear camera (if no, make sure that the wire is correctly putted into both slots).
Rear camera installation: rear camera wires need to be connected to the rear light wires (red = plus). This way of connection will enable the rear camera to work as reversing camera. External installation should be properly isolated and should not be mechanically taut.

 PRODUCT DESCRIPTION

1. Lens
2. Speaker
3.  Place for mounting rubbers
4. RESET button
5.  microSD memory card slot
6. Place for rear camera wire
7. mini USB slot
8.  Screen
9. MODE button
10. UP button
11. POWER button
12.  DOWN button
13. OK button

GETTING STARTED

1. Mount and connect the camera into the power adapter.

2.  Insert (already formatted into the FAT32 file format) microSD memory card. NOTE: the memory card should be putted in /out only when the device is o .

3. Set in the menu:
   a. Date & time
   b. Loop recording (adjust the length of the recordings). If you turn loop recording , the files will not be overwritten.
   c. Set the highest available resolution.
   d. Turn G-sensor on.

4. Make sure that the motion detection and parking mode are turned off.
   If those features stay on during driving, they will negatively  affect the recordings. Those features should be turned on when the car is parked.

5. Camera will automatically start to record every time we turn the ignition on (unless there is no constant power supply in the car cigarette lighter socket of your vehicle).

KEYS DESCRIPTION

MENU

A. VIDEO MODE

1. Video resolution
   Set the resolution of recordings. The higher the resolution, the better the video quality, however such files take more space on the memory card.

2. Length of the video
   Set the length of the video recordings.

3. Automatic turn off
   Set the time after which the camera should stop recording.

4. Sound recording
   Turning on / o the sound on the recordings. This may be set outside the menu by using the “down” button.

5. Exposure
   Set the video exposure.

B. PHOTO MODE

1. White balance
   Set the white balance of the pictures.

2. Color
   Set the color of the pictures (normal/intense/faded).

3. Effect
   Set the effect of the pictures (normal / sepia / black & white / negative).

C. PLAYBACK MODE

1. Volume
   Set the volume of the displayed video.

2. Delete
   Deletes the selected file.

3. Protect
   Protects the selected file from being overwritten.

D. MAIN MENU

1. Format
   Format of the microSD memory card in the device. NOTE: When formatting, the whole data and files will be deleted.

2.   Keys sound
   Turning on / o the sound of the keys.

3. Automatic shutdown
   Set if and after what time of inactivity the device should turn itself o .

4. Date / time
   Set the date and time in the device.

5. Language
   Set the camera language.

6. TV system
   Choose between PAL and NTSC7.

7. Frequency
   Set the frequency (50Hz / 60Hz).

8. Screen saver
   Set if and after what time the screen saver function should be turned on.

9. G-sensor
   Turning on / o the parking mode. When the sensor is turned on in the moment of collision the file will be automatically protected from being overwritten.

10. Parking mode
    When the parking mode is turned on, camera left in the car and connected to the power supply detects a car shake (e.g. During the coliision at the parking lot) the camera will turn itself on and start to record. This mode may be quickly turned on / o in video mode by pressing & holding the Down button (unless the camera is recording at the moment).

11. Motion detection
    When this option is turned on and left in the standby mode connected to the power supply, camera after detecting a motion will record a short 8-seconds movie.

12. Default settings
    Restores the default settings of the camera.

13. Software version.

SCREEN & ICONS

A. VIDEO MODE

1. Info about the camera working mode
2.  Info about video recording
3.  Info about parking mode
4.  Info about motion detection
5. Info about G-sensor
6.  Info about sound recording
7. Info about set resolution
8. Length of the recording or if the camera does not record the space left on the memory card expressed in the time left for recordings.
9. Info about inserted memory card.
10.  Info about connected power supply.
11. Hour
12. Date
13.  Info about exposure

B. PHOTO MODE

1. Info about camera working mode.
2. Info about set resolution of the photos.
3.  Info about space left on the memory card expressed in the quantity of photos left to take.
4.  Info about inserted memory card.
5. Info about power supply.
6. Hour
7. Date
8. Info about digital zoom
9. Info about exposure settings

 PLAYBACK MODE

1. Normal video files
2. Video files protected before the recording (manually).
3. Video files protected by G-sensor and Parking mode
4. Pictures taken by the camera
5.  File name
6. Date of the recording
7. Hour of the recording
8. Length of the recording
9.  Back (short press on Menu button)

SAFETY MEASURES:

1.  Do not disassembly or interfere with the camera. If the device is faulty, contact the service point.
2.  Only use the original accessories.
3. Use only the original charger, included in the set. Using a different power supply can a ect the battery negatively.
4.  Do not use the device for purposes that are against the law of the country or region you are in.
5. The operating temperature of the device is 0 – 35°C. Storage temperature is 5°C to 45°C. Operating air humidity is 5-90% without condensation.
6.  Avoid damaging the device with physical force.
7. Clean the device, especially the lens. Do not use detergents or other chemicals when cleaning the device.
8.  Clean the device only when it’s disconnected from the power supply.
9. Keep the device away from children.
10. Do not expose the device to very high temperatures and fire.

FAQ

1. The device does not turn on / off automatically.
   This action may be caused by the constant power supply in the car cigarette lighter socket.

2. The device restarts itself during driving.
   It is recommended to check the power supply source.

3. The device does not record in the loop.
   Check the motion detection function – it should be turned o during driving.

4. The device shows “memory card full” alert.
   Check the g-sensor and parking mode functions and set them on the possible minimum level. The memory card should be formatted into the FAT32 file system first in the PC, and then in the recorder.

5. The device records noise and overlapped sound:
   The device has a very sensitive microphone, which records all the surrounding sounds. The recorded sounds may overlap and cause distortions. Also the air flow from the front mirror may distort the sound.

 TECHNICAL SPECIFICATION

• Processor                    M-stra8328P
• Video resolution         Front: max. 1920 x 1080p , back: 1280 x 720p
• Sensor                        Front: PS5226, back: 9726
• Lens                           Lens: 6G
• View angle                  Front: 170°, back: 120°
• Dimensions               96mm x 307mm x 35mm
• Memory                     microSD memory card class 10th up to 256GB
• File format                 MOV
• Charger                      Up to 2A
• USB                            Mini USB 2.0
• Microphone / speaker  Built-in
• Battery                         Built-in

NOTE:
Playback of the files on the PC: the camera does not possess a mass memory function. To playback the files on the PC you should remove the memory card from the camera and place it in the PC throughout the memory card reader.

• Only use chargers with a charging current up to 2A. (Do not connect directly to the 220 / 230V socket.) Failure to follow the instructions may cause camera damage or, in extreme cases, light up the device.

 WARRANTY / CLAIMS

The product is covered by a 24-month warranty. Warranty conditions available on the website https://xblitz.pl/warranty/ Complaints should be reported using the form located at: http://reklamacje.kgktrade.pl/
Contact details and website address can be found on the website: www.xblitz.pl
Specifications and contents of the kit are subject to change without notice, we apologize for any inconvenience. The crossed out trash can symbol indicates that unusable electrical or electronic devices, its accessories (such as power supplies, cords) or components (for example batteries, if included) cannot be disposed of alongside with household waste. In order to dispose of the devices or its components (for example, batteries) deliver the device to the collection point, where it will be accepted free of charge. Disposal is subject to the recast version of the WEEE Directive (2012/19/EU) and the Directive on batteries and accumulators (2006/66/EC). Proper disposal of the device prevents degradation of the natural environment. Information about the collection points of the facilities is issued by the competent local authorities. Incorrect disposal of waste is subject to penalties provided for by the law in force in the given area.

References

• System reklamacyjny KGK Trend
• Warranty - Xblitz.pl

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>