WANTJOIN B088FFQSST Cup Sealing Machine User Manual

WANTJOIN B088FFQSST Cup Sealing Machine

SAFETY WARNING

For your safety, please read the instructions before using the machine.

1. DO NOT touch the hot surface to avoid burns.
2. DO NOT immerse product and cable into water to avoid electric shock.
3. MUST beware all age under 18 or area which near children when using the product.
4. UNPLUG the product and let it to cool down before cleaning or after using.
5. ONLY find the nearby authorized service agency for inspection, repair and adjustment when the appliance,cable or the cord being damaged.
6. NEVER use not from the manufactured electrical appliance to avoid injury.
7. NEVER for outdoor using.
8. DO NOT hang the wires on table edges or any hot surface .
9. DO NOT operate or place the product near hot gas or electic stoves.
10. MUST becareful when moving the machine that contain hot oil to avoid burns.
11. MUST turn off all control or functions keys before uplug the product.
12. NEVER use the product for other purposes.
13. KEEP and SAVE the instruction properly.

INSTALLATION

DIRECTION POSALON FOR INSTALLSEALING FILM

For your safety, please read the instructions before using the machine.

Direction Position for Install Sealing Film:
Please follow the direction shown in the picture to install the sealing film.

FIRST TIME USING

Please read the manual before install the sealing film perfectly for the cup sealing machine.

1. Start the Machine.
2. Refill Film Reminder: MUST unplug the power cable everytime while changing films to avoid burns.
3. Display Panel User Guide.

• [POWER]
  • Power indicator light flash in standby mode; Indicator light on without flash in working state.
• [PAUSE]
  • Machine will stop immediately and keep the present state after press this button.
  • Press [ST ART] to continue the action.
  • Press [CANCEL/ROLLING] for rolling film.
• [START]
  • Press this key for auto-sealing the cup for once by either “automactic” or “semi-automatic” mode.
• [ROLLING/CANCEL]
  • Use for cancel function for pause the machine.
  • Press this key for rotate continuously while in standby state.
• [SOUND]
  • Control the machine On/Off sound.
• [AUTO]
  • Long press to switch between “automatic” or “semi-automatic” mode.
  • Indicator light on for “Automactic” mode; light off for “semi-automatic” mode.
  • Enter ” Smart Assist Mode” by press it once.
• [ CLEAR/SET]
  • Press for enter the “Hidden counting mode”, press again to restore the counting.
  • Long press to clear the current count after a beep and release.
• [Anti- leakage]
  • To fix an unsealed cup, press [AUTO] during standby mode. The indicator light flash, place the unsealed cup in the machine and press [ST ART] . Machine will sucess sealed for second time.
• [Blade Auto Clean]
  • Fill the heating plate slot with paper towel and bloack the water outlet with the red plug.
  • Press [AUTO] until the indicator light flash and press [START] .
  • Pree the [PAUSE] button or touch the safety switch after film sealed once. Press [Cancel] to finish a complete cleaning process.
  • Repeat above steps for 3-5 times to complete.
• [Autonomous Parameter Setting]
  • Long Press [SOUND] for 3 seconds to adjust the parameter.
  • Press [SOUND] to switch to P1-P5, then press “ ” or “ ” to adjust the value.
  • Auto save after 5 seconds or Press [ROLLING/CANCEL] to manual save.

TROUBLESHOOTING

CLEAN AND MAINTENANCE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>