BEGA 50 646.3 Ceiling and Wall Luminaire for Indoor Use Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
BEGA 50 646.3 Ceiling and Wall Luminaire for Indoor Use Instruction Manual
Dimension
Application
Ceiling and wall luminaire · indoor luminaire made of aluminium and hand-blown
crystal glass.
For a variety of interior lighting applications.
Product description
Luminaire made of Aluminium, finish Polished aluminium
Hand-blown crystal glass, white inside, with screw-neck
Silicone gasket
2 mounting holes ø 5.5mm
Distance apart 200mm
2 cable entries for through-wiring for mains cable up to ø 10.5 mm max. 3 ×
1.5@
Connecting terminal 2.5@ with plug connection
Earth conductor connection
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-280 V
BEGA Thermal Switch®
Temporary thermal shutdown to protect temperature-sensitive components
Safety class I
Protection class IP 64
Dust-tight and protection against splash water
Impact strength IK06
Protection against mechanical impacts < 1 joule
– Safety mark
– Conformity mark
Weight: 3.2 kg
This product contains light sources of energy efficiency class(es) D
Safety
The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage protection
The electronic components installed in the luminaire are protected against
overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e.g. transients, etc. we recommend
separate overvoltage protection components.
You can find them on our website at www.bega.com.
Lamp
Module connected wattage 13.8 W
Luminaire connected wattage 16 W
Rated temperature ta=25 °C
Ambient temperature ta max=30 °C
50 646.3K3
Module designation LED-0854/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 2255 lm
Luminaire luminous flux 985 lm
Luminaire luminous efficiency 61,6 lm/W
Installation
LED are high-quality electronic components!
Please avoid touching the light output opening of the LED directly during
installation or relamping.
Loosen hexagon socket head cap screws (3x).
Disassemble LED module.
Loosen LED-connection and earth connection (plug connection).
Dismantle the mains supply cable.
Lead mains supply cable through the cable entry into the luminaire housing.
Fix the luminaire housing with enclosed or any other suitable fixing material
onto the mounting surface.
It is imperative to use the enclosed gaskets.
Push silicone sleeves over the lines.
Make earth conductor connection to plug connection.
Push silicone sleeves over the lines and make electrical connection to plug
connection.
Make earth connection between LED module and luminaire housing (plug
connection).
Push LED plug into coupler as fa as it will go.
Assemble LED module.
Tighten the hexagon socket head cap screws evenly (3x).
Please observe that the LED module is not damaged mechanically.
Fix glass to the luminaire housing by turning it clockwise.
Make sure that gasket is positioned correctly
Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt.
Defective glass must be replaced.
Replacing the LED module
The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to
those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
Inspect and, if necessary, replace the luminaire gaskets.
Defective glass must be replaced.
Close the luminaire.
Spares
Spare glass 11 003 081 47RG
LED power supply unit DEV-0150/500
LED module 3000 K LED-0854/930
Gasket 83 000 36
BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com