Icom ID-52A PLUS VHF and UHF Transceiver Instruction Manual
- July 28, 2024
- ICOM
Table of Contents
ID-52A PLUS VHF and UHF Transceiver
“`html
Specifications:
- Product: VHF/UHF Transceiver
- Model: ID-52A PLUS / ID-52E PLUS
- Technology: Analog and Digital Smart Technologies (D-STAR)
Product Information:
The Icom ID-52A PLUS / ID-52E PLUS is a VHF/UHF transceiver that
combines traditional analog technologies with Digital Smart
Technologies for Amateur Radio (D-STAR). It is designed with
state-of-the-art technology and craftsmanship to provide years of
trouble-free operation.
Usage Instructions:
1. Basic Operations:
Refer to the Basic Manual that comes with the transceiver for
instructions on basic operations and precautions. Ensure to follow
the guidelines provided in the manual for safe usage.
2. Advanced Features:
This Advanced Manual provides detailed instructions on utilizing
the advanced features of the transceiver. Follow the guidelines in
this manual for more complex operations.
3. Download Additional Resources:
Visit the Icom website at https://www.icomjapan.com/support/
to download manuals, guides, and glossaries related to the ID-52A
PLUS or ID-52E PLUS transceiver.
FAQ:
Q: Where can I find a glossary of HAM radio terms for the
transceiver?
A: You can download a glossary of HAM radio terms from the Icom
website by entering ID-52A PLUS or ID-52E PLUS into the Search
box.
Q: How can I update the repeater list on the transceiver?
A: Refer to the “Updating the repeater list” PDF guide available
on the Icom website for instructions on updating the repeater
list.
“`
ADVANCED MANUAL
VHF/UHF TRANSCEIVER
ID-52A PLUS ID-52E PLUS
This manual describes instructions for advanced features and instructions. See
the BASIC MANUAL that come with the transceiver for precautions and basic
operations.
1 ATTACHING ACCESSORIES 2 USING a microSD CARD 3 BATTERY CHARGING 4 FM RADIO OPERATION 5 D-STAR OPERATION (ADVANCED) 6 GPS OPERATION (ADVANCED) 7 VOICE TX FUNCTION 8 RECORDER FUNCTION 9 MEMORY OPERATION 10 SCAN OPERATION 11 REPEATER AND DUPLEX OPERATIONS 12 SET MODE 13 Bluetooth® OPERATION 14 SHARE PICTURES FUNCTION 15 OTHER FUNCTIONS 16 UPDATING THE FIRMWARE 17 OPTIONS
INTRODUCTION
Thank you for choosing this Icom product. This product is designed and built with Icom’s state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation.
This product combines traditional analog technologies with Digital Smart Technologies for Amateur Radio (D-STAR), for a balanced package.
ABOUT THE CONSTRUCTION OF THE MANUAL
You can use the following manuals to understand and operate this transceiver.
L If necessary, you can download a glossary of HAM radio terms from the Icom
website.
TIP: You can download each manual and guide from the Icom website:
https://www.icomjapan.com/support/ Enter “ID-52A PLUS” or “ID-52E PLUS” into
the Search box on the site.
(As of July 2024)
Basic manual (Comes with the transceiver)
Instructions for the basic operations and precautions. D-STAR GUIDE that
explains registering your call sign to a gateway repeater and D-STAR’s basic
operations is also included.
Advanced manual (This manual)
· Attaching accessories · Using a microSD card · Battery charging · FM Radio
operation · D-STAR operation (ADVANCED) · GPS operation (ADVANCED) · VOICE TX
function · Recorder function · Memory operation · Scan operation · Repeater
and duplex operations · SET mode · Bluetooth® operation · Share Pictures
function · Other functions · Updating the firmware · Options
CI-V Reference Guide (PDF type) Describes the control commands used in remote
control operation (serial communication using CI-V).
About the DV Gateway function (PDF type) Instructions for the system
requirements or operations to use the DV Gateway function.
Updating the repeater list (PDF type) Instructions for the steps to update the
repeater list.
Using the GPS Logger function (PDF type) Instructions for operating the GPS
Logger function that saves location data from a GPS receiver onto a microSD
card as a log.
TRADEMARKS
Icom and the Icom logo are registered trademarks of Icom Incorporated (Japan)
in Japan, the United States, the United Kingdom, Germany, France, Spain,
Russia, Australia, New Zealand, and/or other countries. The Bluetooth® word
mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and
any use of such marks by Icom Inc. is under license. Other trademarks and
trade names are those of their respective owners. Adobe, Acrobat, and Reader
are either registered trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries. APRS® is a registered trademark
of Mr. Bob Bruninga in the U.S.A. and other countries. Microsoft and Windows
are trademarks of the Microsoft group of companies. Google Play and Android
are registered trademarks or trademarks of Google LLC. IOS is a trademark or
registered trademark of Cisco in the U.S. and other countries and is used
under license. iPadOS is a trademark of Apple Inc., registered in the U.S. and
other countries and regions. App Store is a service mark of Apple Inc. All
other products or brands are registered trademarks or trademarks of their
respective holders.
i
INTRODUCTION
FUNCTIONS AND FEATURES OF ADOBE® ACROBAT® READER®
The following functions and features can be used with Adobe Acrobat Reader.
· Keyword search Click “Find” (Ctrl+F) or “Advanced Search” (Shift+Ctrl+F) in
the Edit menu to open the search screen. This is convenient when searching for
a particular word or phrase in this manual. L The menu screen may differ,
depending on the Adobe Acrobat Reader version.
· Find screen · Advanced search screen
Click to open the find or search screen or advanced search screen.
· Printing out the desired pages. Click “Find (Ctrl+F)” or “Advanced Search
(Shift+Ctrl+F)” in the Edit menu to open the search screen. This is convenient
when searching for a particular word or phrase in this manual. L The menu
screen may differ, depending on the Adobe
Acrobat Reader version. L Select the “A4″ size to print out the page in the
original
manual size.
· Read Out Loud feature. The Read Out Loud feature reads aloud the text in this PDF. Refer to the Adobe Acrobat Reader Help for the details. (This feature may not be usable, depending on your PC environment, including the operating system.)
L The screen may differ, depending on the Adobe Acrobat Reader version. ii
INTRODUCTION
ENTERING AND EDITING TEXT
Controls used for text entry:
[DIAL] (Rotate) Selects a character
To change the character type: 1. When not selecting text, or an entered text
is
selected, push [QUICK]. 2. Rotate [DIAL] to select the character type, and
then push [ENT].
Cancels
Moves the cursor to the left
Selects the character
Clears
Moves the cursor to the right
[ENT] Opens the Opens the Entry Sets character Select window
· To insert a text, move the cursor to a place to enter, and then rotate
[DIAL] or push D-pad().
· To clear a character, push [CLR]. · To consecutively clear characters,
continuously
hold down [CLR].
Character Selectable characters and Character
type
symbols
conversion
ABC
A to Z, 0 to 9, (space)
A/a
abc
a to z, 0 to 9, (space)
A/a
123
0 to 9, (space)
!”#
! ” # $ % & ‘ ( ) * + , – . / : ; < = > ? @ [ ] ^ _ ` { | } ~ (space)
TIP: When the character type is “ABC” or “abc,” and while entering a character, push [QUICK] to select upper case or lower case letters.
Push [QUICK]
iii
INTRODUCTION
USABLE CHARACTERS
The usable characters and symbols and the maximum characters differ, depending
on the item. See the following list for details. L The usable characters and
symbols for each character type are described at the bottom of the page.
Category FM Radio Memory
Memory CH Call CH
Your Call Sign
Repeater List
Item
Group Name Name
Group name Name Name Name
Call Sign Group Name
Name Sub Name Call Sign GW Call Sign
Unproto Address
Character type
[ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC]
[abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] A to Z, 0 to
9, /, (space) [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc]
[123] [!”#] A to Z, 0 to 9, /, (space) A to Z, 0 to 9, /, (space)
[ABC] [abc] [123] [!”#]
GPS TX Mode
GPS Memory P-Scan Edge Program Link
CS screen
Comment
Object Name/ Item name
GPS Message Group Name
Name Name Program Link name
UR R1 R2
[ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#] A to Z, 0 to 9, /, (space) A to Z, 0 to 9, /, (space) A to Z, 0 to 9, /, (space)
My Call Sign
Call Sign
A to Z, 0 to 9, /, (space)
My Station DTMF Memory
TX Message DTMF code
[ABC] [abc] [123] [!”#] 0 to 9, A, B, C, D, *, #
SD Card
Save Setting Export
[ABC] [abc] [123] [!”#] [ABC] [abc] [123] [!”#]
Bluetooth DR screen
Picture
Device Name Direct Input (UR) Direct Input (RPT)
Receiver
[ABC] [abc] [123] [!”#] A to Z, 0 to 9, /, (space) A to Z, 0 to 9, /, (space) A to Z, 0 to 9, (space) [ABC]: A to Z, 0 to 9, (space) [abc]: a to z, 0 to 9, (space) [123]: 0 to 9, (space) [!”#]: ! ” # $ % & ‘ ( ) * + , – . / : ; < = > ? @ [ ] ^ _ ` { | } ~ (space)
iv
Maximum characters
16
Information
16
16
16
16
16
8
16
16
8
8
8
56
Normally 12 characters (API52,DSTAR*)
The number of characters you can
43
enter differs, depending on the data
extension and altitude settings.
9
20 16 16 16 16 8 8 8
12 (+1)
20 24
23
23
9 8 8 8
Includes “/” between the Call sign and Memo field. Illegal characters: / : ; < > Illegal characters: / : ; < > Excluding “ICOM BT”
INTRODUCTION
HOW TO ENTER TEXT
Example: Entering “Calling” as a Memory name. [MENU] > MEMORY > Memory CH
1. Push [MENU]. 2. Select “MEMORY” on the second page of the
MENU screen. 3. Select “Memory CH.” 4. Select a channel group where the memory
channel you want to edit is listed. 5. Rotate [DIAL] to select a Memory
channel.
6. Push [QUICK]. 7. Select “Edit.”
11. Rotate [DIAL] to select a character, then push [ENT].
L Information · To move the cursor forward, push D-pad(). · To move the cursor
backward, push D-pad(). · To insert a character, move the cursor to a place to
enter, then rotate [DIAL]. · To clear a character, push [CLR]. · To
consecutively clear characters, continuously hold
down [CLR]. · When the character type is “ABC” or “abc,” and while
entering a character, push [QUICK] to select upper case or lower case letters.
12. Repeat steps 9 ~ 11 to enter a name, and push [ENT].
· The Edit screen is displayed. 8. Select “NAME.”
9. Push [QUICK]. 10. Select the character type.
· Returns to the Edit screen, and the entered name is displayed.
13. Select “<
· A confirmation dialog is displayed. 14. Select “YES.”
L To enter symbols, select “!”#.”
· The Memory name is overwritten. v
Section 1
ATTACHING ACCESSORIES
Attaching the antenna…………………………………………………………………..1-2 Attaching and detaching
the battery ……………………………………………….1-2 Attaching and detaching the belt
clip………………………………………………1-3 Attaching the hand strap……………………………………………………………….1-3
1-1
1 ATTACHING ACCESSORIES
Attaching the antenna
Insert the antenna into the base of the SMA antenna connector and tighten the
antenna.
TIP: Third-party high gain antennas may increase transceiver performance. The
optional AD-92SMA antenna connector adapter enables you to use antennas with a
BNC connector. (p. 17-2)
Antenna
Attaching and detaching the battery
To attach or detach the battery pack or battery case, see the illustrations
below. See page 3-8 for battery case details. L When attaching the battery
case, slide it, and press firmly
until it is fixed with both latches. L When detaching the battery case, turn
OFF the
transceiver.
To attach:
To detach:
2 1
11 2
Battery pack or battery case
NOTE: · Even when the transceiver is turned OFF, a small
current still flows in the transceiver. When not using the transceiver for a
long time, remove the battery pack or case to prevent the batteries from
becoming exhausted. · The battery protection function automatically reduces
power to Low1 power (0.5 W) when the temperature is around 0°C (32°F) or
below. In addition, High, Mid, and Low2 power selections are disabled.
1-2
1 ATTACHING ACCESSORIES
Attaching and detaching the belt clip
To attach or detach the belt clip, first remove the battery pack or case, if
it is attached. (p. 1-2) See the illustration below. To attach the belt clip,
slide the belt clip in the direction of the arrow until the belt clip locks in
place, and makes a `click’ sound. To detach the belt clip, lift the tab up (1)
and slide the belt clip in the direction of the arrow (2).
Attaching the hand strap
Slide the hand strap through the loop on the top of the rear panel, as
illustrated below.
To attach
To detach
q w
Tab Belt clip
Battery pack or battery case
Hand strap
R WARNING! NEVER swing the transceiver by holding the hand strap. This could
cause injury to yourself or others.
1-3
Section 2 USING A microSD CARD
NOTE: See the Basic manual Section 6 for details on how to insert or remove a microSD card and precautions.
About data saved on a microSD card……………………………………………..2-2 Saving settings onto
a microSD card ……………………………………………..2-2
D Saving as a new file ………………………………………………………………………..2-2 Saving with a
different file name…………………………………………………….2-3 Loading the saved files on the
microSD card …………………………………..2-4 Backing up data saved on the microSD card onto
a PC ……………………2-5
D About the microSD card’s folder………………………………………………………..2-5 D Making a backup
file on your PC……………………………………………………….2-6 Importing or exporting a CSV format
file …………………………………………2-7 D Importing ……………………………………………………………………………………….2-7 D
Exporting ……………………………………………………………………………………….2-8 About the SD Card mode
……………………………………………………………..2-9 Check the free space and the recording time on
the microSD card …..2-10
2-1
2 USING A microSD CARD
About data saved on a microSD card
The following data can be saved onto the card:
· The transceiver’s settings · Communication/receive log and contents ·
Automatic answering voice audio in the DV mode · Voice audio for the Voice TX
function · Voice recorder · Captured screens · Memory channel contents · FM
Radio memory
· Your (UR) call sign memory · Repeater List · GPS memory · Position data from the GPS receiver · Pictures for the Share Pictures function · Transmitted and received log of Share Picture · Pictures for the Opening Picture setting
Saving settings onto a microSD card
The Memory channels, settings on the MENU screen, and the Repeater List can be
saved on a microSD card. Saving data on the card enables you to easily restore
the transceiver to its previous configuration, even if you perform an All
Reset.
You can save settings data as a new file, or you can overwrite a current file.
DSaving as a new file
[MENU] > SET > SD Card > Save Setting
1. Push [MENU]. 2. Select “SD Card” in the “SET” menu.
5. Push [ENT].
· The confirmation screen is displayed. 6. Select “YES.”
3. Select “Save Setting.”
· While saving, a progress bar is displayed. When saving is completed, the SD
CARD screen is displayed.
L To exit the MENU screen, push [MENU].
Overwriting a current file: To overwrite data in a current file, select the
file you want to overwrite in step 4 to the left.
4. Select “<
· The file is named in the following format: SetYYYYMMDD_xx (YYYY: Year, MM:
month, DD: day, xx: file number).
L To change the file name, see page 2-3.
TIP: · Data is saved in the “icf” file format. You can copy
the icf data on a PC and edit it using the CS-52PLUS programming software. ·
If “Save Form” is set to the earlier firmware version, the confirmation window
is displayed after step 4. To save the data in the earlier firmware version,
select “YES.”
2-2
2 USING A microSD CARD
Saving with a different file name
[MENU] > SET > SD Card > Save Setting 1. Push [MENU]. 2. Select “SD Card” in
the “SET” menu.
3. Select “Save Setting.”
4. Select “<
5. Hold down [CLR] to delete the characters.
6. Enter a file name, and then push [ENT].
L See page iii on how to enter characters. 7. Select “YES.”
· While saving, a progress bar is displayed. When saving is completed, the SD
CARD screen is displayed.
L To exit the MENU screen, push [MENU]. 2-3
2 USING A microSD CARD
Loading the saved files on the microSD card
The saved Memory channels, settings on the MENU screen, and Repeater List can
be copied to the transceiver. This makes it easy to copy Memory channels or
the Repeater List, to another ID-52A/E PLUS and operate with the same data.
NOTE: Saving the current data is recommended before loading other data into
the transceiver.
Example: Loading all the data in the “Set20240531_01” file
[MENU] > SET > SD Card > Load Setting
1. Push [MENU]. 2. Select “SD Card” in the “SET” menu.
6. Select “YES” or “NO.”
3. Select “Load Setting.” 4. Select a data file to load into the transceiver.
· YES: The skip settings of the Repeater List are retained.
· NO: The skip settings of the Repeater List are cleared.
7. Select “YES.”
5. Select the loading content.
· Starts checking and loading the data file. · After loading, “COMPLETED!” is displayed.
8. Restart the transceiver to operate with the new
· ALL:
setting.
Loads all Memory channels, settings on the
MENU screen, and the Repeater List into the
transceiver.
· Except My Station:
Loads all Memory channels, setting on the
MENU screen except MY station, and the
Repeater List into the transceiver.
· Repeater List Only:
Loads only the Repeater List into the transceiver.
2-4
2 USING A microSD CARD
Backing up data saved on the microSD card onto a PC
A backup file enables easy restoration, even if the data on the microSD card is accidentally deleted.
· GpsMemory folder The GPS Memory in the “csv” format.
DAbout the microSD card’s folder
The folder in the microSD card contains the following:
· MemoryCh folder The Memory channel contents in the “csv” format.
· RadioMemory folder The FM Radio memory contents in the “csv” format.
ID-52
Capture GpsMemory
· RptList folder The Repeater List in the “csv” format.
Csv
MemoryCh
· YourMemory folder The Your (UR) call sign memory in the “csv” format.
RadioMemory
· Gps folder The GPS logging data in the “log” format.
RptList
Gps
YourMemory
OpeningPicture
Picture
Private
Rx
QsoLog
Tx
Reply
RxLog
· OpeningPicture folder The pictures in the “bmp” format that are used for the
Opening Picture setting.
· Picture folder The pictures in the “jpg” format that are used with the Share
Pictures function.
· Private folder The RX Picture History and TX Picture History.
· Rx folder The RX Picture History in the “dat” format. L The RX Picture
History contents are not displayed on the PC.
· Tx folder The TX Picture History in the “dat” format. L The TX Picture
History contents are not displayed on the PC.
Setting
· QsoLog folder The QSO log data in the “csv” format.
Voice
YYYYMMDD
· Reply folder The automatic reply data in the “wav” format.
YYYYMMDD
· RxLog folder The RX record log data in the “csv” format.
VoiceRec
YYYYMMDD
· Setting folder The transceiver’s setting data in the “icf” format.
VoiceTx
YYYYMMDD
· Voice folder The recorded QSO audio date folders.
· ID-52 folder The folders created in the transceiver are contained in this
folder.
· Capture folder The captured screen data in the “png” or “bmp” format.
· Csv folder The Repeater List, Your (UR) call sign memory, GPS Memory
folders, and so on.
· VoiceRec folder The recorded Voice recorder audio date folders.
· YYYYMMDD folder The recorded QSO audio data and the recorded Voice recorder
audio data is saved in the “wav” format.
· VoiceTx folder The recorded voice audio data for the Voice TX function in
the “wav” format.
2-5
2 USING A microSD CARD
Backing up data saved on the microSD card onto a PC
DMaking a backup file on your PC
Windows 11 is used for these instructions.
1. Insert the microSD card into the microSD card drive or a memory card
reader on your PC.
2. Click the “Open folder to view files” option to access the card.
5. Open a folder to copy a backup file, then rightclick, and then click ” .” · Copies the card data onto your PC. (Example: Copying into the “Backup” folder on the C drive)
· `ID-52′ folder is displayed. 3. Right-click “USB Drive.” 4. Click ” .”
Click
Click
Click
6. To remove the card, click the remove media icon (” ” in the screenshot
shown below) in the taskbar. Then, click “Eject Removable Disk.” Click
7. When “Safe To Remove Hardware” is displayed, remove the card.
TIP: When “USB Connect” is set to “SD Card Mode,” and the transceiver is connected to the PC through a USB data cable, you can directly access the microSD card that is set in the transceiver from the PC. ([MENU] > SET > Function > USB Connect)
2-6
2 USING A microSD CARD
Importing or exporting a CSV format file
Read this section before importing or exporting a Comma Separated Values (CSV)
format file from the microSD card. You can import or export the following
data: · Memory CH · FM Radio Memory · Your Call Sign · Repeater List · GPS
Memory
DImporting
NOTE: · Before importing, make a backup file of all the
transceiver’s data to the card in case of data loss. · The transceiver cannot
display files that have a file
name 24 or more characters. If necessary, rename them using 23 characters or
less. When exporting CSV format files using the CS-52PLUS, BE SURE the names
are 23 characters or less.
Example: Importing the Your Call sign memory.
[MENU] > SET > SD Card > Import/Export > Import
1. Push [MENU]. 2. Select “SD Card” in the “SET” menu.
6. Select the CSV file to import.
· The confirmation dialog is displayed. TIP: When importing a Repeater List,
“Keep SKIP’ settings in Repeater List?” is displayed. See step 6 on page 2-4
for details. 7. Select “YES.”
· Starts importing. · After importing ends, “COMPLETED!” is displayed.
3. Select “Import/Export.”
8. To complete importing, restart the transceiver.
4. Select “Import.”
5. Select “Your Call Sign.”
2-7
2 USING A microSD CARD
Importing or exporting a CSV format file
DExporting
Saving as a new file: Example: Exporting the Your Call sign memory.
[MENU] > SET > SD Card > Import/Export > Export 1. Push [MENU]. 2. Select “SD
Card” in the “SET” menu.
3. Select “Import/Export.”
4. Select “Export.”
6. Select “<
· Displays the FILE NAME screen.
L The file is named in the following format:
Your*YYYYMMDD_xx
(YYYY: Year, MM: month, DD: day, xx: file number).
- When you select the other items, each file is named
as shown below.
Memory CH:
“Mch”
FM Radio Memory: “Radio”
Repeater List:
“Rpt”
GPS Memory:
“Gps”
L See page iii on how to enter characters. 7. Push [ENT].
5. Select “Your Call Sign.”
· The confirmation dialog is displayed. 8. Select “YES.”
· Exports the setting data. L To exit the MENU screen, push [MENU].
Overwriting the current file: When you overwrite data in a current file,
select the file you want to overwrite in step 6 to the left.
2-8
2 USING A microSD CARD
About the SD Card mode
When “USB connect” is set to “SD Card Mode,” and the transceiver is connected
to the PC through a USB data cable, you can transfer the files between the
micoSD card set in the transceiver and a PC. You can back up the setting data
and recording data saved on the microSD card to a PC, and save the image data
for the Share Pictures function and the firmware data to the microSD card
without inserting or removing it.
[MENU] > SET > Function > USB Connect
1. Connect the transceiver to a PC using a USB cable.
2. Push [MENU]. 3. Select “Function” in the “SET” menu. 4. Select “USB
Connect.”
NOTE: Before connecting the transceiver in the SD Card mode to a PC with a USB
cable, a microSD card must be inserted. L If the microSD card is not inserted,
insert it with the
transceiver turned OFF, and then reconnect the USB cable.
TIP: In the SD Card mode, the transceiver works not as a transceiver but as a
data storage device. It temporarily stops some functions as follows: · Stops
recording · Pauses the GPS Logger function and the RX History
Log function · Disconnects a Bluetooth device · Disables the Auto Power OFF
function
To exit the SD Card mode L This instruction manual is based on Windows 11. 1.
Click ” ” in the task tray. 2. Click “Eject Device.” 3. After “Safe to Remove
Hardware” is displayed,
remove the USB cable from the PC.
5. Select “SD Card Mode.”
· The confirmation dialog is displayed. 6. Select “Yes.”
2-9
2 USING A microSD CARD
Check the free space and the recording time on the microSD card
[MENU] > SET > SD Card > SD Card Info 1. Push [MENU]. 2. Select “SD Card” in
the “SET” menu. 3. Select “SD Card Info.”
· The free space and the recording time on the microSD card are displayed.
L To exit the MENU screen, push [MENU].
2-10
Section 3
BATTERY CHARGING
Battery information ………………………………………………………………………3-2 D Battery life
……………………………………………………………………………………..3-2 D Battery icon
……………………………………………………………………………………3-2
Charging information ……………………………………………………………………3-3 D Charging through the [DC
IN] jack …………………………………………………….3-3 D Charging with a USB cable
………………………………………………………………3-4
Charging with the BC-202IP2 optional rapid charger ………………………..3-5 Charging
with the BC-202IP3L optional rapid charger ………………………3-6 Connecting BC-202IP3L
together…………………………………………………..3-7 External DC power operation
………………………………………………………..3-7 About the optional battery case
……………………………………………………..3-8
D Battery life ……………………………………………………………………………………..3-8 D About the battery
replacement ………………………………………………………….3-8 Specifications for the battery charger
and battery packs……………………3-9 D BP-271 Li-ion battery pack (optional)
………………………………………………3-9 D BP-272 Li-ion battery pack (supplied)
……………………………………………..3-9 D BP-307 Li-ion battery pack (optional)
………………………………………………3-9 D BC-202IP2 rapid charger
(optional)………………………………………………..3-9 D BC-202IP3L rapid charger
(optional)………………………………………………3-9
3-1
3 BATTERY CHARGING
Battery information
DBattery life
The approximate battery life (operating time) as shown below is calculated
under the following assumptions: · Power save setting: Auto (Short) · Duty
cycle: TX : RX : Standby = 1 : 1 : 8
(based on operating style)
The approximate battery life:
Battery pack BP-271 BP-272 BP-307
FM mode 4.25 hours 7.25 hours 12 hours
L See page 3-8 for the optional BP-273 battery case battery life.
NOTE: BE SURE to replace the battery pack with a new one approximately five
years after purchase, even if it still holds a charge. The material inside the
battery cells will become weak after a period of time, even with little use.
The estimated number of times you can charge the pack is between 300 and 500.
Even when the pack appears to be fully charged, the operating time of the
transceiver may become short when: · Approximately five years have passed
since the
pack was manufactured. · The pack has been repeatedly charged.
TIP: Keep the battery terminals clean. It’s a good idea to clean them occasionally.
DBattery icon
The ” ” battery icon is displayed when the battery pack is attached to the
transceiver.
Icon
Battery status The battery is being charged. The battery has sufficient capacity. The battery is exhausted a little.
(green) (red)
No icon
The battery is nearing exhaustion.
The battery is almost fully exhausted. L Immediately charge the battery pack.
Otherwise, the icon will soon start blinking, “LOW BATTERY” will be displayed,
and the transceiver will automatically turn OFF.
When an external DC power supply (12 V DC) is connected, the battery is not
being charged because: · The battery is completely charged. · “Charging (Power
ON)” is set to “OFF.”
L The battery icon for the BP-273 cannot display the capacity of the alkaline batteries. The battery icon always displays ” ,” and it does not reflect with the true battery capacity.
To display the correct battery status Select the attached battery pack in the
following item. (Default: BP-271/BP-272) ([MENU] > SET > Function > Battery
Pack Select)
To display the Battery Pack Select dialog every time you attach the battery
pack, set the following item to “ON.” ([MENU] > SET > Function > Battery Pack
Confirmation)
3-2
3 BATTERY CHARGING
Charging information
NOTE: · Prior to using the transceiver for the first time, the
battery pack must be fully charged for optimum life and operation. · BE SURE
to turn OFF the transceiver while charging. Otherwise, the battery pack will
not charge.
L While charging, the charging icon ” ” and “Charging….” are displayed.
L The icon and “Charging….” disappear when the battery pack is fully charged.
DCharging through the [DC IN] jack
The approximate battery life (operating time) as shown below is calculated
under the following assumptions: · When using the optional CP-12L or OPC-254L,
the
battery pack can be charged with the power ON. (p. 3-7) L To connect, see the
illustration below. · The BP-273 battery case has no charging capability or
socket.
Approximate charging time · BP-271: 3 hours · BP-272: 5 hours · BP-307: 8
hours
BC-167S*1
To charge the battery pack: · Use the supplied cable or optional battery
charger. · Use a USB cable (User supplied). (p. 3-4) · Use the optional rapid
charger. (p. 3-6)
Charging note · CAUTION: BE SURE to attach the battery pack
before connecting the DC cable. · Turn OFF the transceiver when using the BC-
167S. · DO NOT charge the fully charged battery pack.
This may cause a shorter battery life.
CP-12L
To an AC outlet
To [DC IN] Turn OFF*2
To a cigarette lighter socket (12 V DC)
OPC-254L
To a 12 V DC power source
Black: _ White: +
1 The shape is different, depending on the version. 2 When using the BC-167S, turn OFF the transceiver.
3-3
3 BATTERY CHARGING
Charging information
DCharging with a USB cable
You can charge the battery pack with a USB cable (Type-C) while operating the
transceiver.
Supplied USB cable (Type-C/Type-A)
To the [USB] port To a USB port
Power adapter or external battery (User supplied)
PC, Mobile device
NOTE: · BE SURE to attach the battery pack to the transceiver. · USB Power
Delivery (USB PD) is not supported. · To use a mobile device or a PC as an
external power
source, set the following item to “ON” (default). ([MENU] > SET > Function >
USB Power Input (Phone, Tablet, PC)) · The battery pack is used as a power
source while transmitting, even when an external power source is connected.
Therefore, you cannot transmit if the battery pack is exhausted. · You may not
be able to charge: – Depending on your USB cable or power adapter. – When
using a USB hub or connecting to a low output
USB port. · Charging time may differ, depending on the USB port. · The S-meter
may appear, or the noise may occur, due
to the influence of the USB power supply’s noise. In that case, unplug the USB
cable to disconnect the transceiver from the USB power supply. · When
operating the transceiver while charging, the charging may not be sufficient,
and the battery pack may be consumed, depending on the power adapter.
TIP: · When a USB cable is connected, the charging is
stopped when the battery is fully charged. After that, the charging will
resume when a certain amount of capacity is consumed while connecting the USB
cable. · You can change the operation when the transceiver is connected to a
PC through a USB cable. ([MENU] > SET > Function > USB Connect)
3-4
3 BATTERY CHARGING
Charging with the BC-202IP2 optional rapid charger
The optional BC-202IP2 rapidly charges a battery pack. L When about 90% of the
battery capacity is charged,
the BC-202IP2 stops charging and the charging indicator lights green.
Therefore, the battery life will be a little shorter than when charging with
the transceiver.
Approximate charging time · BP-271: 1.5 hours · BP-272: 2.5 hours · BP-307: 4
hours L These are the time when the battery is exhausted, and
charging with the transceiver power off.
The following item is required. · BC-123S (L-shaped type plug)
(A different type, or no power adapter is supplied, depending on the charger
versions.)
Charging note R DANGER! NEVER use a battery pack that is not
manufactured or approved by Icom. · CAUTION: DO NOT connect anything to the
[DC IN] jack or the [USB] port on the side of the transceiver when placing the
transceiver to the rapid charger. This may cause the charger’s malfunction. If
the charging indicator blinks orange, disconnect the power adapter from the
charger, and then reconnect it. · BE SURE to turn OFF the transceiver. When
the transceiver power cannot be turned OFF because of the battery exhaustion,
detach the battery pack from the transceiver. Then charge the battery pack by
itself. · The BC-202IP2 rapid charger can only charge the BP-271, BP-272, or
BP-307 Li-ion battery pack. Other types of rechargeable batteries, NiCd, or
Ni-MH cannot be charged. · If the charging indicator blinks orange, there may
be a problem with the battery pack or charger. Contact your dealer if you have
problems charging a new battery pack.
Transceiver + battery pack
Battery pack BP-271, BP-272, or BP-307
AC outlet Turn OFF
Guide rail
Tabs
BC-123S (L-shaped type plug)
The CP-23L or OPC-515L can also be used instead of the power adapter.
Screws (Self-tapping screws: 3.5 × at least 30 mm) Purchase separately. Using screws is recommended to secure the charger.
BC-202IP2
Charging indicator · Lights orange: While charging · Lights green: Charging is completed. · Blinks orange: A charging error has occurred.
3-5
3 BATTERY CHARGING
Charging with the BC-202IP3L optional rapid charger
The optional BC-202IP3L rapidly charges a battery pack. L When about 90% of
the battery capacity is charged,
the BC-202IP3L stops charging and the charging indicator lights green.
Therefore, the battery life will be a little shorter than when charging with
the transceiver.
Approximate charging time · BP-271: 2 hours · BP-272: 3 hours · BP-307: 5
hours L These are the time when the battery is exhausted, and
charging with the transceiver power off.
The following item is required. · BC-123S (straight type plug)
Charging note R DANGER! NEVER use a battery pack that is not
manufactured or approved by Icom. · CAUTION: DO NOT connect anything to the
[DC IN] jack or the [USB] port on the side of the transceiver when placing the
transceiver to the rapid charger. This may cause the charger’s malfunction. If
the charging indicator blinks orange, disconnect the power adapter from the
charger, and then reconnect it. · BE SURE to turn OFF the transceiver. When
the transceiver power cannot be turned OFF because of the battery exhaustion,
detach the battery pack from the transceiver. Then charge the battery pack by
itself. · The BC-202IP3L rapid charger can only charge the BP-271, BP-272, or
BP-307 Li-ion battery pack. Other types of rechargeable batteries, NiCd, or
Ni-MH cannot be charged. · If the charging indicator blinks orange, there may
be a problem with the battery pack or charger. Contact your dealer if you have
problems charging a new battery pack.
AC outlet
Battery pack BP-271, BP-272, or BP-307
Transceiver + battery pack
BC-123S (straight type plug)
Turn OFF BC-202IP3L
Charging indicator
L To connect the power adapter to the charger, remove the charger’s left
cover.
3-6
3 BATTERY CHARGING
External DC power operation
Operating note · DO NOT connect over 16 V DC directly into the
[DC IN] jack of the transceiver. The power source voltage must be between 10.0
V ~ 16.0 V DC. · DO NOT transmit at high power for a long period of time. The
transceiver becomes hot, and it may cause a burn. · Use the optional CP-12L or
OPC-254L when using the external DC power. · Confirm the correct polarity of
the OPC-254L supply connection. Connect the OPC-254L to an external power
source (user supplied). · Use an external DC-DC converter to connect the
transceiver through the optional CP-12L or OPC254L to a 24 V DC power source.
Ask your dealer for details. · When the external power is used, the Power Save
function (p. 12-18) is automatically turned OFF. · Depending on the external
power voltage, the battery pack may be used to operate the transceiver, and
the battery pack capacity is consumed.
TIP: The battery pack can be charged even if the transceiver is ON when
“Charging (Power ON)” is set to “ON” (default). This operation may generate
certain spurious signals, and the S-meter may appear, or noise may be heard.
When you operate the transceiver while charging, and if you cannot receive
signals correctly, set “Charging (Power ON)” to “OFF.” ([MENU] > SET >
Function > Charging (Power ON))
CP-12L
To [DC IN]
OPC-254L
To a cigarette lighter socket (12 V DC)
To a 12 V DC power source
Black: _ White: +
CAUTION: BE SURE to attach the battery pack before connecting the DC cable.
L The BC-167S cannot be used for external DC power operation.
3-7
3 BATTERY CHARGING
About the optional battery case
The BP-273 uses three AA (LR6) size alkaline batteries. 1. Remove the battery
case top, as shown below. 2. Install three AA (LR6) size alkaline batteries.
L Install only alkaline batteries. L BE SURE to observe the correct polarity.
3. Attach the battery case. (p. 1-2)
BP-273
Alkaline battery
Batteries cautions: · When installing batteries, confirm that they are all
the same brand, type, and capacity. Do not mix new and old batteries together.
· DO NOT incinerate used battery cells since the internal battery gas may
cause them to rupture. · DO NOT expose a detached battery case to water. If
the battery case gets wet, BE SURE to wipe it dry before using it. · DO NOT
use batteries whose insulated covering is damaged. · Keep the battery
terminals clean. It’s a good idea to clean them occasionally. · Remove the
alkaline batteries when the battery case is not used. Otherwise, the installed
alkaline batteries will be exhausted due to the built-in stepup converter.
TIP: · A built-in step-up converter in the BP-273
increases the voltage to 5.5 V DC. Approximately 100 mW of output power is
possible using the case. Also, the transmit output power selection is
disabled. · The transceiver meets IPX4 requirements for waterproof protection
when the BP-273 is attached. · The batteries may seem to have low capacity
when used in low temperatures, such as 10°C (+14°F) or below. Keep the
batteries warm in this case.
DBattery life
The approximate battery life (operating time), as shown below, is calculated
under the following assumptions: · Power save setting: Auto (Short) · Duty
cycle: TX : RX : Stand-by = 1 : 1 : 8
(based on operating style)
The approximate battery life:
FM mode
4.5 hours
L The battery life may differ, depending on your operating style, or the
installed alkaline batteries.
DAbout the battery replacement
When the alkaline batteries are almost exhausted, “LOW BATTERY” is displayed,
and the battery icon starts to blink. After 10 seconds, the transceiver power
is automatically turned OFF. In that case, replace all 3 batteries with new
alkaline batteries. L The battery icon for the BP-273 cannot display the
capacity of the alkaline batteries. The battery icon always displays ” ,” and
it does not reflect with the true battery capacity.
3-8
3 BATTERY CHARGING
Specifications for the battery charger and battery packs
DBP-271 Li-ion battery pack (optional)
· Voltage:
7.4V
· Discharge Capacity:
1150 mAh (minimum)
· Usable temperature range: 20°C ~ +60°C, 4°F ~ +140°F
· Charging temperature range: 0°C ~ 40°C, 32°F ~ 104°F
· Storage temperature range: 20°C ~ +50°C, 4°F ~ +122°F (within a month)
20°C ~ +35°C, 4°F ~ +95°F (within 3 months)
20°C ~ +20°C, 4°F ~ +68°F (within a year)
· Dimensions:
58 (W) × 86.9 (H) × 9.1 (D) mm, 2.3 (W) × 3.4 (H) × 0.4 (D) inches
(projections are not included)
DBP-272 Li-ion battery pack (supplied)
· Voltage:
7.4V
· Discharge Capacity:
1880 mAh (minimum)
· Usable temperature range: 20°C ~ +60°C, 4°F ~ +140°F
· Charging temperature range: 0°C ~ 40°C, 32°F ~ 104°F
· Storage temperature range: 20°C ~ +50°C, 4°F ~ +122°F (within a month)
20°C ~ +35°C, 4°F ~ +95°F (within 3 months)
20°C ~ +20°C, 4°F ~ +68°F (within a year)
· Dimensions:
58 (W) × 86.9 (H) × 14.2 (D) mm, 2.3 (W) × 3.4 (H) × 0.6 (D) inches
(projections are not included)
DBP-307 Li-ion battery pack (optional)
· Voltage:
7.2V
· Discharge Capacity:
3050 mAh (minimum)
· Usable temperature range: 20°C ~ +60°C, 4°F ~ +140°F
· Charging temperature range: 0°C ~ 40°C, 32°F ~ 104°F
· Storage temperature range: 20°C ~ +50°C, 4°F ~ +122°F (within a month)
20°C ~ +40°C, 4°F ~ +104°F (within 3 months)
20°C ~ +20°C, 4°F ~ +68°F (within a year)
· Dimensions:
58 (W) × 86.9 (H) × 22.4 (D) mm, 2.3 (W) × 3.4 (H) × 0.9 (D) inches
(projections are not included)
DBC-202IP2 rapid charger (optional)
· Power source requirement: 12 V ~ 16 V DC or the specified Icom power adapter
· Charging temperature range: 10°C ~ 40°C, 50°F ~ 104°F
· Weight:
Approximately 105 g, 3.7 oz (without power adapter)
· Dimensions:
88.0 (W) × 47.5 (H) × 72.5 (D) mm, 3.5 (W) × 1.9 (H) × 2.9 (D) inches
(projections are not included)
DBC-202IP3L rapid charger (optional)
· Power source requirement: 12 V ~ 15 V DC or the specified Icom power adapter
· Charging temperature range: 10°C ~ 40°C, 50°F ~ 104°F
· Weight:
Approximately 120 g, 4.2 oz (without power adapter)
· Dimensions:
106.5 (W) × 52.5 (H) × 78.0 (D) mm, 4.2 (W) × 2.1 (H) × 3.1 (D) inches
(projections are not included)
3-9
Section 4
FM RADIO OPERATION
Basic operation……………………………………………………………………………4-2 D Description
…………………………………………………………………………………….4-2 D Turning ON the FM Radio
………………………………………………………………..4-2 D Selecting the FM Radio mode
…………………………………………………………..4-3 D Selecting the group in the Memory
mode……………………………………………4-3 D Searching for an FM Radio signal
……………………………………………………..4-4 D Using the Attenuator function
……………………………………………………………4-4 D Setting a squelch level
…………………………………………………………………….4-5 D Using the Monitor
function………………………………………………………………..4-5
FM Radio memory ……………………………………………………………………….4-6 D Using the FM Radio
Memory…………………………………………………………….4-6 D Adding an FM Radio
memory……………………………………………………………4-6 D Editing an FM radio memory
…………………………………………………………….4-8 D Deleting an FM Radio
memory………………………………………………………….4-9 D Rearranging the display order of the FM
Radio memories…………………..4-10 D Skip setting for the FM Radio memory
…………………………………………….. 4-11
Using the FM Radio mode…………………………………………………………..4-12 FM RADIO items
……………………………………………………………………….4-13
4-1
4 FM RADIO OPERATION
Basic operation
DDescription
You can listen to FM Radio broadcasts. While using the Dualwatch function, you
can still listen to the FM Radio on the pop up window. Up to 500 FM Radio
Memory channels can be separately stored in the 26 groups for easy memory
management. You can stand by listening to FM Radio. Also, the transceiver has
the exclusive FM Radio mode, where only the FM Radio functions. In this mode,
the other functions are disabled.
TIP: The FM Radio Memory channel contents, described in this manual, may
differ from your transceiver’s preloaded contents.
The frequency range for the FM Radio FM: 76.0 MHz to 108.0 MHz The usable
frequency range differs, depending on the
transceiver’s version.
DTurning ON the FM Radio
1. Push [QUICK]. 2. Select “<
· Returns to the standby screen, and the FM RADIO window is displayed.
· ” ” is displayed.
Displayed when the FM Radio is ON.
TIP: To turn OFF the FM Radio Push [QUICK], and then select “<<FM Radio
OFF>>.”
To listen to the FM Radio while monitoring the A/B bands Push [CLR] to close
the FM RADIO window. · You can standby listening to FM Radio.
L To open the FM RADIO window again, push [QUICK], and select “<
NOTE: If you turn ON the Band Scope function while using the Dualwatch
function, the FM Radio audio output may be interrupted due to the AF Output
(DUAL/AIR Band) function. In that case, set “Auto Mute” to OFF, or set “AF
Output (DUAL/AIR Band)” to OFF. L When “AF Output (DUAL/AIR Band)” is set to
ON, the
received audio is momentarily heard during a sweep, and you will know that a
signal is received without looking at the display. ([MENU] > FM RADIO > FM
Radio Set > Auto Mute) ([MENU] > SET > Scope > AF Output (DUAL/AIR Band))
4-2
4 FM RADIO OPERATION
Basic operation
DSelecting the FM Radio mode
1. When the FM RADIO window is displayed, push [MR] to select between the
Tuning and the Memory modes.
2. Rotate [DIAL] to select a frequency or a memory channel.
· Tuning mode
The FM Radio Tuning mode is used to set the desired
FM Radio frequency.
When the Tuning mode is selected, ”
” is
displayed.
To save the selected frequency, hold down [MR] for 1
second.
· Enters it into the lowest memory channel of the selected
group.
DSelecting the group in the Memory mode
Up to 50 FM Radio Memory channels can be assigned to each group for easy
memory management. If you change the group, other area channels can be
selected.
1. Push [MR] to select the Memory mode.
·”
” and the selected memory channel number is
displayed.
2. Push [QUICK].
3. Select “Group Select.”
Tuning mode
· Memory mode
The FM Radio Memory mode is very useful to quickly
select often-used frequency settings.
When the Memory mode is selected, ”
” and the
selected memory channel group (A ~ Z) and number
are displayed.
4. Select the desired group.
Memory mode
TIP: Push [QUICK], and select “VFO” to select the Tuning mode, or select “MR”
to select the Memory mode.
· Returns to the standby screen, and the memory channel in the selected group
is displayed.
5. Rotate [DIAL] to select a memory channel.
4-3
4 FM RADIO OPERATION
Basic operation
DSearching for an FM Radio signal
While in the Tuning mode, hold down D-pad() to start searching the broadcast
signal.
While searching, the frequencies are sequentially displayed.
DUsing the Attenuator function
The Attenuator prevents a desired signal from becoming distorted when a very
strong FM Radio signal is near the frequency, or when a very strong electric
field, such as from a broadcasting station, is near your location.
1. Push [QUICK]. 2. Select “ATT.”
When a signal is received
· When you hold down D-pad(), a down scan starts, and when you hold down
D-pad(), an up scan starts.
· When a signal is received, the scan stops on the frequency.
· To cancel the scan, push D-pad() or [CLR].
3. Select “ON.”
Displayed when the Attenuator is ON.
· “ATT” is displayed.
4-4
4 FM RADIO OPERATION
Basic operation
DSetting a squelch level
The squelch enables the audio to be heard only while receiving a signal that
is stronger than the set level. A higher level blocks weak signals, which
enables you to receive only stronger signals. A lower level enables you to
hear weak signals. The squelch level that is set on the FM RADIO window is
only for the FM Radio.
While holding down [SQL], rotate [DIAL] to select the squelch level.
DUsing the Monitor function
The Monitor function is used to listen to weak FM Radio signals without
changing the squelch setting.
While holding down [SQL], the transceiver monitors weak signals on the
frequency. · The squelch opens.
Automatic squelch
Maximum squelch level
L Information · Options: “OPEN,” “AUTO” (default), and “LEVEL 1” ~
“LEVEL 3” · “LEVEL 1” is loose squelch (for weak signals), and
“LEVEL 3” is tight squelch (for strong signals). · “AUTO” is an automatic
level adjustment using a noise
pulse counting system. · “OPEN” is the continuously open setting.
The first segment blinks.
TIP: You can set the Monitor Hold function on the MENU screen. The transceiver
opens or closes the squelch each time you push [SQL]. ([MENU] > SET > Function
Monitor)
4-5
4 FM RADIO OPERATION
FM Radio memory
DUsing the FM Radio Memory
A total of 26 groups are selectable for FM Radio memory. You can assign up to
50 FM Radio memory channels to each group, for easy memory management. (A
maximum of 500 memories can be assigned to the FM Radio memory.) Some area
stations are preloaded into the FM Radio memory for easy memory management.
TIP: The FM Radio memory contents, described in this manual, may differ from
your transceiver’s programmed memory.
DAdding an FM Radio memory
Step 1. Adding an FM Radio memory and entering the edit mode
[MENU] > FM RADIO > FM Radio Memory 1. Push [MENU]. 2. Select “FM Radio
Memory” in the “FM RADIO” menu.
3. Select a desired group.
L If there is no memory, “– Blank –” is displayed. 4. Push [QUICK]. 5. Select
“Add.”
· The FM RADIO MEM EDIT screen is displayed. TIP: To change the group name,
push [QUICK], and then select “Edit Name” in step 4.
4-6
4 FM RADIO OPERATION
FM Radio memory D Add an FM Radio memory Step 2. Entering an FM Radio Memory
name 1. Select “NAME.”
Step 4. Selecting the skip setting 1. Select “SKIP.”
2. Enter a name.
L See page iii on how to enter characters. 3. After entering, push [ENT]. TIP:
To change the FM Radio memory group, select “GROUP,” then select the desired
group. Step 3. Entering a frequency 1. Select “FREQUENCY.”
2. Select “OFF” or “SKIP.”
· OFF: You can select the memory in the Memory mode. · SKIP:The memory is not
displayed in the Memory
mode. Step 5. Saving the FM Radio Memory 1. Select “<
2. Select “YES.”
2. Rotate [DIAL] to enter the frequency.
L Push D-pad() to move the cursor. L The usable frequency range differs,
depending on the
transceiver’s version. 3. After entering, push [ENT].
· The entered contents are saved in the FM Radio memory, and the display
returns to the selected group screen.
TIP: How to cancel the entered data: 1. Push [CLR]. 2. Select “YES.”
· Cancels the entry, and returns to the selected group screen.
4-7
4 FM RADIO OPERATION
FM Radio memory
DEditing an FM radio memory
This function edits FM Radio memory contents. This is useful when already-
entered data is incorrect, has changed, or new data should be added to the
list.
[MENU] > FM RADIO > FM Radio Memory 1. Push [MENU]. 2. Select “FM Radio
Memory” in the “FM RADIO” menu.
8. After editing, select “<
3. Select a group that includes the memory you want to edit.
9. Select “YES.”
4. Select the memory to be edited.
· The memory contents are overwritten, and returns to the selected group screen.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Edit.”
7. Select an item, then edit it. L See page 4-7 for details.
4-8
4 FM RADIO OPERATION
FM Radio memory
DDeleting an FM Radio memory
All the contents of an FM Radio memory can be deleted.
NOTE: Deleted memories cannot be restored.
[MENU] > FM RADIO > FM Radio Memory
1. Push [MENU]. 2. Select “FM Radio Memory” in the “FM RADIO” menu.
7. Select “YES.”
3. Select a group that includes the memory you want to delete.
4. Select the memory to be deleted.
· The selected FM Radio memory is deleted.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Delete.”
4-9
4 FM RADIO OPERATION
FM Radio memory
DRearranging the display order of the FM Radio memories
You can move the entered FM Radio memories to rearrange their display order in
the selected FM Radio memory group.
[MENU] > FM RADIO > FM Radio Memory 1. Push [MENU]. 2. Select “FM Radio
Memory” in the “FM RADIO” menu.
7. Select a memory to insert the memory you want to move above it.
3. Select a group that includes the memory you want to move.
4. Select the memory to be moved.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Move.”
· The selected memory is inserted above the destination memory.
L If you select “<
4-10
4 FM RADIO OPERATION
FM Radio memory
DSkip setting for the FM Radio memory
You can set memories as skip memories. The selected memories are not displayed
in the Memory mode.
[MENU] > FM RADIO > FM Radio Memory 1. Push [MENU]. 2. Select “FM RADIO.” 3.
Select “FM Radio Memory.”
7. Select “SKIP.”
4. Select a group that includes the memory you want to set the skip setting on.
5. Select the memory to be skipped.
· “SKIP” is displayed on the selected memory. L Push [QUICK], and then select
“SKIP” again to
cancel the skip setting.
TIP: When displaying the FM RADIO window in the Memory mode, push [QUICK], and
selecting “SKIP” also sets the skip setting.
L DO NOT push [ENT]. 6. Push [QUICK].
4-11
4 FM RADIO OPERATION
Using the FM Radio mode
The transceiver has an exclusive FM Radio mode where only the FM Radio
functions. 1. Push [QUICK]. 2. Select “<
· The FM Radio mode screen is displayed. TIP: To cancel the FM Radio mode 1.
Push [QUICK]. 2. Select “<
L In the exclusive FM Radio mode, the other modes are in a sleep state. To
operate the transceiver in a normal way, cancel the FM Radio mode.
4-12
4 FM RADIO OPERATION
FM RADIO items
FM Radio Memory
[MENU] > FM RADIO > FM Radio Memory
A total of 26 groups are selectable for FM radio Memories. You can assign up
to 50 memories to each group, for easy memory management. (A maximum of 500
memories can be assigned to the FM Radio Memory.)
FM Radio memory contents
NAME
The name of an FM Radio memory channel L Enter a name of up to 16 alphanumeric
characters for each memory.
GROUP
The group letter and the name of the group
Entered frequency FREQUENCY L The usable frequency range differs,
depending on the transceiver’s version.
SKIP
Shows the skip status. L The Skip channels are not displayed in
the Memory mode.
Auto Mute
(Default: 2sec)
[MENU] > FM RADIO > FM Radio Set > Auto Mute
Selects whether or not to mute the FM Radio audio in the background while
receiving a signal on the A or B band. L The FM Radio audio is muted while
transmitting,
regardless of this setting. See “To listen to the FM Radio while monitoring
the A/B
bands” on page 4-2 for details.
· OFF:
The Auto Mute function is OFF. The FM Radio
audio is not muted even if the transceiver
receives a signal on the A or B band. The FM
Radio audio is muted when the transceiver
transmits.
· 0 to 10sec: The FM Radio audio is automatically muted
when the transceiver transmits or receives
on the A or B band. After transmitting or
receiving, the Auto Mute timer starts. After the
timer period ends, you can listen to FM Radio
again.
LThe FM Radio audio is muted when a
signal is received during a sweep by the
Band Scope function.
Earphone Antenna
(Default: Not Used)
[MENU] > FM RADIO > FM Radio Set > Earphone Antenna
Selects whether or not to use the earphone antenna
for FM radio.
· Not Used: An earphone antenna is not used.
· Use:
An earphone antenna is used.
Power Save (FM Radio)
(Default: ON)
[MENU] > FM RADIO > FM Radio Set > Power Save (FM Radio)
Sets the power save function to reduce the current drain and conserve battery
power when the FM Radio is ON. · OFF: The power save function is OFF. · ON:
When the FM Radio is ON, and no signal is
received for 5 seconds, this function is activated in a 1:3 ratio (300 : 900
milliseconds).
NOTE: This function is disabled when an external power source is used.
<
[MENU] > FM RADIO > <
Turns ON the FM Radio. When the transceiver receives on the MAIN band and SUB
band, you can still listen to the FM Radio. When the FM Radio is ON, <<FM
Radio OFF>> is displayed on the FM RADIO screen. To turn OFF the FM Radio,
select <
also turns OFF the FM Radio.
<
[MENU] > FM RADIO > <
The transceiver enters an exclusive FM Radio mode where only the FM Radio
functions. While in the FM Radio Mode, <
also exits from the FM Radio mode.
4-13
Section 5 D-STAR OPERATION (ADVANCED)
NOTE: See D-STAR GUIDE on the Basic manual for details on how to register your call sign to a gateway repeater and the basic operations.
“FROM” (access repeater) setting ………………………………………………….5-3 D Using your
transceiver’s repeater list …………………………………………………5-4 D Using the DR scan
………………………………………………………………………….5-5 D Using the Near Repeater Search
function…………………………………………..5-6 D Using TX
History……………………………………………………………………………..5-7
“TO” (Destination) setting ……………………………………………………………..5-8 D Making the “Local
CQ” (Local Area call)……………………………………………..5-9 D Making a “Gateway CQ” (Gateway
call)……………………………………………..5-9 D Using “Your Call Sign”
……………………………………………………………………5-10 D Using RX History
…………………………………………………………………………..5-10 D Using TX
History…………………………………………………………………………… 5-11 D Directly entering
(UR)……………………………………………………………………. 5-11 D Directly entering
(RPT)…………………………………………………………………..5-12
REPEATER DETAIL screen ………………………………………………………..5-13
Connecting to a reflector …………………………………………………………….5-14 D What is a reflector?
……………………………………………………………………….5-14 D Unlinking a
reflector……………………………………………………………………….5-14 D Linking to a reflector
………………………………………………………………………5-15 D Using a reflector
……………………………………………………………………………5-16 D Reflector Echo testing
……………………………………………………………………5-16 D Requesting repeater information
……………………………………………………..5-16
Message operation …………………………………………………………………….5-17 D Entering a TX message
………………………………………………………………….5-17 D Transmitting a message
…………………………………………………………………5-17 D Deleting a TX message
………………………………………………………………….5-18
Viewing received call signs………………………………………………………….5-19 D Viewing the call
signs on the RX History screen ………………………………..5-19
BK mode communication…………………………………………………………….5-21
EMR communication ………………………………………………………………….5-22 D Adjusting the EMR AF
level…………………………………………………………….5-22
Automatic DV detection ………………………………………………………………5-23
Automatic Reply function…………………………………………………………….5-24 D Recording an Auto Reply
message ………………………………………………….5-25 D Auto Position Reply function
…………………………………………………………..5-26
5-1
Section 5
D-STAR OPERATION (ADVANCED)
Data communication…………………………………………………………………..5-27 D Connection
…………………………………………………………………………………..5-27 D Data communication application
setting……………………………………………5-27 D Sending data
………………………………………………………………………………..5-27 D DV Fast Data function
……………………………………………………………………5-28
About the display type ………………………………………………………………..5-28 Digital squelch
functions……………………………………………………………..5-29
D The Digital Call Sign squelch setting………………………………………………..5-29 D The Digital
Code Squelch setting …………………………………………………….5-29 Repeater list
……………………………………………………………………………..5-30 D Repeater list
contents…………………………………………………………………….5-30 Entering new information into the
repeater list ……………………………….5-31 D Required items for the communication cases
……………………………………5-31 D Entering new information into the repeater list
…………………………………..5-32 Repeater list operation ……………………………………………………………….5-36 D
Editing repeater data ……………………………………………………………………..5-36 D Deleting repeater
data……………………………………………………………………5-36 D Rearranging the display order of the
repeaters………………………………….5-37 D Adding new repeater information from RX History
……………………………..5-38 D Skip setting for the DR scan……………………………………………………………5-39 D
Entering or editing a repeater group name………………………………………..5-40 Your Call
Sign……………………………………………………………………………5-41 D Entering Your Call Sign
………………………………………………………………….5-41 D Deleting Your Call
Sign…………………………………………………………………..5-42 D Rearranging the display order of Your
Call Signs……………………………….5-43 Are your settings
correct?……………………………………………………………5-44
IMPORTANT! · The repeater list, described in this manual, may differ from your
transceiver’s preloaded contents. · Although Japanese repeaters are used in
the setting examples, the Japanese repeater node (port) letters
are different from other country’s. BE SURE to add the repeater node letter in
the 8th digit of the call sign, according to the frequency band shown below.
1200 MHz: A (B in Japan) 430 MHz: B (A in Japan) 144 MHz: C (no repeaters in
Japan)
To begin the Digital mode communication using other than the D-STAR Repeater (DR) function
To begin Digital mode communication using other than the DR function, you can use the VFO mode, Memory mode, or Call Channel mode. This manual description focuses on the DR function operation, which can be easily set up. If you want to use other than the DR function, see the procedures as described to the right, or select the repeater in a Memory channel.
For a Local area call or Gateway call: 1. Set the access repeater’s frequency.
(p. 11-2) 2. Set the Duplex direction and frequency offset.
(p. 11-4) 3. Set the call signs (UR/R1/R2). (p. 12-8)
For a Simplex call: 1. Set the operating frequency. 2. Set the call signs
(UR/R1/R2). (p. 12-8)
5-2
5 D-STAR OPERATION (ADVANCED)
“FROM” (access repeater) setting
Your access repeater must be set in “FROM” when you make a call on the DR
screen. You have 5 ways to select the access repeater.
By rotating [DIAL] Select the preset repeater on the DR screen by rotating
[DIAL].
Displayed while rotating [DIAL]
· When you know your access repeater
From the repeater list (p. 5-4) When your access repeater is in your
transceiver’s repeater list, you can select it by selecting the repeater area
and name, if entered, or call sign.
· When you do not know which repeaters you can access
Search for a repeater using the DR scan (p. 5-5) The Normal DR scan searches
for output repeater frequencies of nearby repeaters. The scan stops when a
signal is detected. The scan also stops on Simplex signals.
The Near Repeater scan searches for output repeater frequencies of nearby
repeaters by using your location and the repeater’s location, if it is entered
in the Repeater List. The DR scan starts scanning and stops when a signal is
detected. You can also find only FM repeaters using the Near Repeater (FM)
scan.
Search for near repeaters (p. 5-6) The transceiver scan searches for near
repeaters by using your location and the repeater’s location, if it is entered
in the Repeater List. The nearest repeaters in your transceiver’s repeater
list are displayed as selectable options. You can select the nearby DV or FM
repeater type.
· When “FROM” data is saved in the TX History.
Select from the TX History (p. 5-7) Select a repeater that you have accessed
before from the TX History record.
Scan items
5-3
5 D-STAR OPERATION (ADVANCED)
“FROM” (access repeater) setting
DUsing your transceiver’s repeater list
When your access repeater is in your transceiver’s repeater list, you can
select it from the list. By just selecting the repeater from the list, the
repeater call sign, its frequency, duplex setting, and frequency offset are
automatically set, for easy operation.
Example: Selecting the “Kirkland (IA)” repeater in Washington state in the USA
from the repeater list.
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “FROM,” and then push [ENT].
5. Select your access repeater.
3. Select “Repeater List.”
· Returns to the DR screen, and the selected repeater name is displayed in
“FROM.”
L The repeater list, described in this manual, may differ from your
transceiver’s preloaded contents.
4. Select the repeater group where your access repeater is listed.
TIP: When you select an FM repeater: When an FM repeater is in your
transceiver’s repeater list, you can select it from the list. When selecting
an FM repeater, the “TO” setting is not necessary, and a “” is displayed
in “TO.”
When selecting an FM repeater.
How to change the repeater group: To change the repeater group on the DR screen, push [QUICK], then select “Group Select.”
5-4
5 D-STAR OPERATION (ADVANCED)
“FROM” (access repeater) setting
DUsing the DR scan
The DR scan scans frequencies to find a signal on a repeater, or on a simplex
frequency. You can use 2 kinds of DR scans, Normal scan and Near Repeater
scan.
Normal scan: To quickly find a repeater, the Normal scan skips repeaters that
are not set as an access repeater. L The “USE (FROM)” setting (p. 5-33) is set
to “NO” on the
repeater list. ([MENU] > MEMORY > Repeater List)
Near Repeater scan: The Near Repeater scan searches for up to 20 nearby
repeaters within 160 kilometers (100 miles) by using your location and the
repeater’s entered position data, and then lists the repeaters. L The Near
Repeater scan continues, even if you turn OFF
the transceiver, and then turn it ON again during the scan. L If your own
position data is not being received from GPS
satellites, the last received position data is used.
NOTE: Even if your transceiver receives a repeater signal, the repeater may
not receive your signal, because the repeater’s output power is higher than
your transceiver’s, and your signal does not reach the repeater.
TIP: The DR scan scans the simplex frequencies in the repeater list, in
addition to D-STAR repeaters.
Example: Selecting an active repeater using the DR scan.
1. Hold down [DR] for 1 second to display the DR screen.
2. Hold down [SCAN] for 1 second.
· The DR scan setting window is displayed. 3. Select the scan type.
· Normal: Searches for repeaters whose “USE (FROM)” setting is set to “YES.”
· Near Repeater (ALL): Searches for up to 20 each of nearby DV or FM
repeaters. (Total 40 repeaters)
· Near Repeater (DV): Searches for up to 20 nearby DV repeaters.
· Near Repeater (FM): Searches for up to 20 nearby FM repeaters.
· The selected scan starts. · In the DR scan, the repeaters are sequentially
displayed by distance, in descending order. L The scan resumes the same as
other scans. (p. 12-5)
The repeaters are sequentially displayed.
4. When the transceiver receives a signal from a repeater, the scan stops. Push [SCAN].
· The DR scan is canceled, and the repeater is set to “FROM.”
5-5
5 D-STAR OPERATION (ADVANCED)
“FROM” (access repeater) setting
DUsing the Near Repeater Search function
The transceiver searches for the nearest repeaters by using your location and the repeater’s entered position data. The nearest repeaters in your transceiver’s repeater list are displayed as selectable options.
4. Select the type of nearby repeater to display.
NOTE: · When using the Near Repeater Search function, BE
SURE first to receive your own GPS position data, or manually enter your
position data. · If no repeater is found within a 160 kilometers (100 miles)
range, “No Repeater Found” is displayed. · If the last received position data
can be used, “GPS is invalid. Search by last valid position” is displayed.
Example: Selecting a nearby repeater from the Near Repeater list.
Step 1: Receiving your own location from the GPS satellite
Confirm the GPS receiver is receiving the satellite signals. · The GPS icon
blinks when searching for satellites.
· The GPS icon stops blinking when the minimum needed number of satellites is found.
· Near Repeater (ALL): Displays up to 20 nearby DV and FM repeaters. (A total
40 repeaters)
· Near Repeater (DV): Displays up to 20 nearby DV repeaters.
· Near Repeater (FM): Displays up to 20 nearby FM repeaters.
5. Select the repeater to use as your access repeater, considering the
distance from your location to the repeater.
“FM” is displayed for the FM repeaters.
Repeater call sign
L It may take only a few seconds to receive, or it may take a few minutes,
depending on your operating environment. If you have difficulties receiving,
we recommend that you try a different location.
L If your own location is not being received, the last received position is
used for your location.
Distance and direction from your location to the repeater*
- When the “POSITION” setting (p. 5-34) is set to “Approximate” on the repeater list, the direction data is not displayed if the distance to the repeater is less than 5 kilometers.
Step 2: Selecting the access repeater from the Near Repeater list
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “FROM,” and then push [ENT].
· Returns to the DR screen and the selected repeater is set in “FROM.”
3. Select “Near Repeater.”
L You can change only the near repeater by rotating [DIAL].
L To select from All Repeaters, push [QUICK], then select “<<Select from All
Repeaters>>.”
5-6
5 D-STAR OPERATION (ADVANCED)
“FROM” (access repeater) setting
DUsing TX History
The TX History saves up to 10 of the latest access (From) repeaters you
transmitted on. You can select a repeater from TX History as your access
repeater.
Example: Selecting the “Hirano” repeater from TX History.
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “FROM,” and then push [ENT].
TIP: When you push [QUICK] in step 5, you can display the REPEATER DETAIL screen or delete the TX HISTORY screen’s repeater information.
3. Select “TX History.”
4. Select the TX History (DV) or TX History (FM).
· TX History (DV): Displays the TX History of the DV repeaters.
· TX History (FM): Displays the TX History of the FM repeaters.
5. Select the repeater to use it as your access repeater.
· Returns to the DR screen and the selected repeater is set in “FROM.”
5-7
5 D-STAR OPERATION (ADVANCED)
“TO” (Destination) setting
“CQCQCQ,” the destination repeater, or station call sign must be set in “TO”
when you make a DV mode call. You have 9 ways to set the destination.
By rotating [DIAL] Rotate [DIAL] to select the repeater or Your Call Sign
displayed on the DR screen. (This operation is disabled when “CQCQCQ” is set.)
To make a Local Area CQ call Set “CQCQCQ” in “TO” (Destination). (p. 5-9)
To make a Gateway CQ call Select a repeater from the Repeater List, if you
want to make a Gateway call. (p. 5-9)
TIP: After you receive the individual station or repeater’s signal, the call
sign can be captured by
holding down the Call Sign Capture key ([RXCS]), and you can quickly and
easily reply to a call.
To make a call to a specific station Select the station call sign in the Your
Call Sign list. (p. 5-10)
To make a call through a Reflector Select a reflector you want to call
through. (p. 5-14)
To select from RX History When you receive a call, repeater or caller station
data is saved in RX History. Select the destination from the record. (p. 5-10)
TIP: How to change the repeater group When “Local CQ” or “Gateway CQ” is selected, you can change the repeater group. To change the repeater group on the DR screen, push [QUICK], then select “Group Select.”
To select from TX History When you make a call, the destination repeater or called station data is saved in TX History. Select the destination from the record. (p. 5-11)
To directly enter the destination station call sign Directly enter the destination station’s call sign. (p. 5-11)
To directly enter the destination repeater call sign Directly enter the
destination repeater’s call sign. (p. 5-12)
5-8
5 D-STAR OPERATION (ADVANCED)
“TO” (Destination) setting
D Making the “Local CQ” (Local Area call)
When “Local CQ” is selected on the TO SELECT screen, “CQCQCQ” is set in “TO.”
Example: Making a Local area call by accessing the “Kirkland (IA)” repeater.
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “TO,” and then push [ENT].
D Making a “Gateway CQ” (Gateway call)
When “Gateway CQ” is selected on the TO SELECT screen, you can select the
repeater to make a gateway call to.
Example: Making a Gateway CQ call to the “Hirano” repeater from the “Kirkland
(IA)” repeater.
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “TO,” and then push [ENT].
3. Select “Local CQ.”
3. Select “Gateway CQ.”
· Returns to the DR screen, and “CQCQCQ” is displayed in “TO.”
4. Select the repeater group where your destination repeater is listed.
5. Select the destination repeater.
L Each repeater has a correct node (A, B, or C band) that you want to transmit
on. See page 5-2, “IMPORTANT” for band letter details.
· Returns to the DR screen, and the selected repeater name is displayed in
“TO.”
TIP: After selecting a destination repeater, you can select another repeater
preset in your repeater List by rotating [DIAL].
5-9
5 D-STAR OPERATION (ADVANCED)
“TO” (Destination) setting
DUsing “Your Call Sign”
The “Your Call Sign” memory saves individual or repeater station call signs.
When you select the call sign for the “TO” (Destination) setting, you can make
a Gateway call. When you call an individual station through a gateway, the
signal is automatically sent to the last repeater that the individual station
accessed. Therefore, even if you do not know where the individual station is
located, you can make a call.
NOTE: If the repeater, set in “FROM” (access repeater), has no Gateway call
sign, you cannot make a gateway call.
Example: Selecting “Rick” from “Your Call Sign.”
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “TO,” and then push [ENT].
DUsing RX History
When a call is received in the DV mode, the call data is saved in the RX
History. Up to 50 callers, and only the last called call signs, a total of 51
histories can be saved. Example: Selecting “Rick” in the RX History. 1. Hold
down [DR] for 1 second to display the DR
screen. 2. Push D-pad() to select “TO,” and then push [ENT].
3. Select “RX History.”
3. Select “Your Call Sign.”
4. Select a destination name or call sign.
4. Select a destination name or call sign.
· Returns to the DR screen, and the selected name is displayed in “TO.”
L The “*” (asterisk) is displayed at the beginning of the called station’s
call sign. (p. 5-19)
· Returns to the DR screen, and the selected name is displayed in “TO.”
TIP: After selecting a destination, you can select another station preset in
your transceiver by rotating [DIAL].
TIP: To add an RX HISTORY data to the “Your Call Sign” memory, push [QUICK], then select “Add To Your Memory.”
5-10
5 D-STAR OPERATION (ADVANCED)
“TO” (Destination) setting
DUsing TX History
TX History saves the repeater and station name and call sign of up to 20 “TO”
(Destination) settings used when you made the calls. NOTE: Until you make a
call in the DV mode, you cannot select “TO” (destination) from the TX History.
Example: Selecting the “Kirkland (IA)” repeater in the TX History.
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “TO,” and then push [ENT].
DDirectly entering (UR)
The destination station call sign can be directly entered. Example: Directly
entering the call sign “JM1ZLK.” 1. Hold down [DR] for 1 second to display the
DR
screen. 2. Push D-pad() to select “TO,” and then push [ENT].
3. Select “Direct Input (UR).”
3. Select “TX History.” 4. Select a destination repeater.
4. Enter a call sign of up to 8 characters, including spaces.
L See page iii on how to enter characters. 5. After entering, push [ENT].
The Sub name is displayed when a repeater is selected. · Returns to the DR
screen, and the selected repeater
name is displayed in “TO.”
TIP: You can add the TX HISTORY data to memory, or delete it from the TX
HISTORY screen. Push [QUICK], then select the option.
· Returns to the DR screen and the entered call sign is displayed in “TO.”
L After entry, you can edit the call sign in the DIRECT INPUT (UR) screen.
L The entered call sign remains on the DIRECT INPUT (UR) screen until you
enter a new call sign.
TIP: If the entered call sign is duplicated in the “Your Call Sign” memory,
the name is displayed. (Only when the name has been entered.)
5-11
5 D-STAR OPERATION (ADVANCED)
“TO” (Destination) setting
DDirectly entering (RPT)
The destination repeater call sign can be directly entered. NOTE: BE SURE to
include a node letter as the 8th digit. See page 5-2 “IMPORTANT” about the
node letters. Example: Directly entering the call sign “JP3YDH A.” 1. Hold
down [DR] for 1 second to display the DR
screen. 2. Push D-pad() to select “TO,” and then push [ENT].
3. Select “Direct Input (RPT).”
4. Enter a call sign of up to 8 characters, including spaces.
L See page iii on how to enter characters. 5. After entering, push [ENT].
· Returns to the DR screen and “JP3YDH A” is displayed in “TO.”
L After entry, you can edit the call sign in the DIRECT INPUT (RPT) screen.
L The entered call sign remains on the DIRECT INPUT (RPT) screen until you
enter a new call sign.
TIP: · If the entered call sign is duplicated in the repeater list,
the name is displayed in “TO” (Only when the name has been entered). · When
directly entering the repeater call sign, including a “/” at the beginning is
also correct.
5-12
5 D-STAR OPERATION (ADVANCED)
REPEATER DETAIL screen
Depending on the content, such as position data or UTC offset, the distance
between your location and the repeater, or the repeater time can be displayed
on the REPEATER DETAIL screen. The detail screen can also be entered from the
FROM SELECT screen.
Example: Displaying the “Hirano/Icom” repeater detail screen
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “TO” then push [ENT].
The REPEATER DETAIL screen Repeater frequency
Repeater name Sub name Call sign
Group number
Direction from your position*
Repeater type
Duplex setting Distance from your position Repeater time
3. Select “Gateway CQ.” 4. Select “13: Japan.”
- When the “POSITION” setting (p. 5-34) is set to “Approximate” on the repeater list, the direction data is not displayed if the distance to the repeater is less than 5 kilometers.
L If there is no position data, the distance and direction from your position are not displayed. See page 6-3 to confirm your position.
L When selecting an FM repeater, either of “FM” or “FM-N” and the tone setting are displayed.
TIP: You can display the REPEATER DETAIL screen when the DR screen is displayed. When you set the repeater as shown below, push [QUICK], then select “Repeater Detail.”
5. Select “Hirano/Icom.” L DO NOT push [ENT].
6. Push [QUICK]. 7. Select “Detail.”
· The REPEATER DETAIL screen is displayed.
8. Push [ENT]. · Returns to the previous screen.
5-13
5 D-STAR OPERATION (ADVANCED)
Connecting to a reflector
DWhat is a reflector?
A reflector is a special server connected to the Internet and running a
version of the D-Plus software. If the D-Plus software is installed on your
access repeater, it provides various functions including gateway and reflector
linking capabilities (It is known as the D-STAR reflector system). The D-STAR
reflector system enables a number of D-STAR repeaters anywhere to link to a
reflector. This means that when you transmit through a D-STAR repeater linked
to a reflector, your voice can be heard on other repeaters linked to the
reflector, and you can hear other stations that are connected to the
reflector.
D-STAR reflector system Reflector
Access repeater
USA
CAN UK
AUS
DUnlinking a reflector
Before trying to link to another reflector, BE SURE to unlink the currently
connected to the repeater.
NOTE: If a reflector is already connected, ask on the air whether or not you
can change reflectors and wait for responses. BE SURE to reconnect back to the
same reflector when you finish your conversation.
1. Hold down [DR] for 1 second to display the DR screen.
2. Push D-pad() to select “TO,” and then push [ENT]. · Displays the TO SELECT
screen.
3. Select “Reflector.”
4. Select “Unlink Reflector.”
· Displays the REFLECTOR screen.
· Returns to the DR screen, and “Unlink Reflector” and “U” are displayed in “TO.”
5. Hold down [PTT] to unlink the reflector. · The TX/RX indicator lights red.
5-14
5 D-STAR OPERATION (ADVANCED)
Connecting to a reflector
DLinking to a reflector
If your repeater is not currently linked to a reflector, or if you want to
change it to another reflector, follow the steps below. Before linking to
another reflector, BE SURE to unlink the current reflector. (p. 5-14) Direct
inputting a reflector Example: Directly enter “REF030CL.” 1. Push D-pad() to
select “TO,” and then push [ENT].
2. Select “Reflector.”
6. Push [ENT].
· Returns to the DR screen, and “Link to Reflector” and “REF030CL” are
displayed in “TO.”
7. Hold down [PTT] to link to the Reflector. Using TX History TX History
saves up to 5 reflectors that your access repeater linked to before. Example:
Select “REF030CL” in TX History. 1. Push D-pad() to select “TO” then push
[ENT].
3. Select “Link to Reflector.”
· The TO SELECT screen is displayed. 2. Select “Reflector.”
The REFLECTOR screen is displayed. 3. Select “Link to Reflector.”
The Link to Reflector screen is displayed. 4. Select the Reflector that you
want to link to.
4. Select “Direct Input.”
5. Push D-pad to move the cursor, and select the reflector type, reflector
number, or module letter.
· Returns to the DR screen, and “Link to Reflector” and “REF030CL” are
displayed in “TO.”
5. Hold down [PTT] to link to the Reflector.
5-15
5 D-STAR OPERATION (ADVANCED)
Connecting to a reflector
DUsing a reflector
1. Push D-pad() to select “TO,” and then push [ENT]. · The TO SELECT screen
is displayed.
2. Select “Reflector.” The REFLETOR screen is displayed.
3. Select “Use Reflector.”
DRequesting repeater information
When you send the repeater information command, an ID message is sent back.
1. Push D-pad() to select “TO,” and then push [ENT]. · The TO SELECT screen
is displayed.
2. Select “Reflector.” · The REFLECTOR screen is displayed.
3. Select “Repeater Information.”
· Returns to the DR screen, and “Use Reflector” and “CQCQCQ” are displayed in “TO.”
· Returns to the DR screen, and “Repeater Information” and “I” are displayed in “TO.”
4. Hold down [PTT] to transmit.
DReflector Echo testing
To confirm that your signal is correctly getting into the repeater, you can
transmit a short message as a trial. After releasing [PTT], your message will
be played back. 1. Push D-pad() to select “TO,” and then push [ENT].
· The TO SELECT screen is displayed. 2. Select “Reflector.”
The REFLECTOR screen is displayed. 3. Select “Echo Test.”
4. Hold down [PTT] to transmit the repeater Information command.
5. Release [PTT] to hear the repeater ID message.
· Returns to the DR screen, and “Echo Test” and “E” are displayed in “TO.”
4. Hold down [PTT] and speak into the microphone. 5. Release [PTT] to hear
your message.
5-16
5 D-STAR OPERATION (ADVANCED)
Message operation
You can save up to 5 short messages in the transceiver’s memory to transmit in
the DV mode. Each message can be up to 20 characters.
DEntering a TX message
[MENU] > SET > My Station > TX Message Example: Entering “JAPAN TOM” into TX
message
memory number 1. 1. Push [MENU]. 2. Select “My Station” in the “SET” menu.
DTransmitting a message
You can transmit a preset TX message by pushing [PTT] in the DV mode. First,
select a TX message which also turns ON the Message Transmission function.
[MENU] > SET > My Station > TX Message
1. Push [MENU]. 2. Select “My Station” in the “SET” menu.
3. Select “TX Message.”
3. Select “TX Message.”
4. Select a TX Message memory number.
4. Select a TX Message memory number.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Edit.”
7. Enter a message of up to 20 characters.
L To not transmit any message, select “OFF.” L To exit the MENU screen, push
[MENU].
L Information · The message is transmitted with your voice signal. · The
message is transmitted each time you push [PTT]. · When continuously
transmitting, the selected TX
message is transmitted every 30 seconds.
TIP: RX call sign and message display As the default, the received call sign
and message are automatically displayed and scrolled. To not display and
scroll them, set RX Call Sign to “OFF.” ([MENU] > SET > Display > RX Call
Sign)
L See page iii on how to enter characters. 8. After entering, push [ENT].
· Returns to the TX MESSAGE screen.
5-17
5 D-STAR OPERATION (ADVANCED)
Message operation
DDeleting a TX message
[MENU] > SET > My Station > TX Message Example: Deleting the entered TX
message “JAPAN
TOM” from TX message memory number 1. 1. Push [MENU]. 2. Select “My Station”
in the “SET” menu.
3. Select “TX Message.”
4. Select a TX Message memory number.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Clear.”
· The confirmation dialog is displayed. 7. Select “YES.”
· The entered message is cleared. L To exit the MENU screen, push [MENU].
5-18
5 D-STAR OPERATION (ADVANCED)
Viewing received call signs
When you receive a DV call, the calling station and the repeater call signs are saved. Up to 50 calls can be saved. When you receive the 51st call, the oldest call history is deleted. L Even if the transceiver is turned OFF, the RX records are not deleted.
DViewing the call signs on the RX History screen
1. Hold down [CD] for 1 second. 2. Select an RX history memory to view the details.
L Information
· The first page of the “RX HISTORY” screen displays the
latest RX record of the MAIN band. The second page or later
displays the record according to the received date and time,
regardless of the band it was received on.
· The RX history number, the caller’s name (or call
sign), destination, RX message, RX date and time,
“GW,” and “GPS” are displayed.
· “GW” is displayed when the Gateway call is received.
· “GPS” is displayed when the received call includes
position data.
· “UP” is displayed when the repeater uplink signal is
received.
· In the Quick Menu window, you can select the
following options.
RX>CS:
Temporarily enters the received
call sign into “TO.”
Call Sign Display: The received data is displayed in
the Call Sign Display mode.
Name Display: The received data is displayed in
the Name Display mode.
Delete:
Deletes the selected RX history.
Delete All:
Deletes all RX history.
RX HISTORY screen (RX01)
Displayed when a Gateway call is received.
History number
D-PRS TX format icon*1
Called station (“CQCQCQ” is displayed if you received a CQ call.)
3. Push [ENT]. · Displays the RX history detail screen. L Push D-pad() to view the content.
<1st page> · CALLER: Displays the caller station’s call sign*2, and any note entered after the call sign. · CALLED: Displays the called station’s call sign*2. L “CQCQCQ” is displayed when receiving a Local Area call or Gateway call. <2nd page> · RX RPT1: Displays the repeater’s call sign*2 that was accessed by the caller station. If the received call was a Gateway call, this item displays the gateway call sign of the repeater you received the call from. · RX RPT2: Displays the repeater’s call sign*2 you received the call from. L The operating frequency is displayed instead of the above items when the call was not through a repeater (Simplex call).RX message
Caller station*2
Received date
L A note may be and time
displayed after “/.”
*1 The displayed icon differs, depending on the D-PRS
TX format.
GPS: Position OBJ: Object
ITEM: Item
WX: Weather
*2 When a name is entered in the MEMORY, the name
is also displayed.
5-19
5 D-STAR OPERATION (ADVANCED)
Viewing the received call signs
D View the call signs on the RX History screen
<3rd page>· RX MESSAGE: Displays any message
included in the received call if
entered.
· RX TIME:
Displays the date and time
the call was received.
TIP: To delete RX HISTORY data On the RX HISTORY or the detail screen, push [QUICK], then select “Delete” or “Delete All.”
<4 ~ 6th page> Displays position data of the caller station. If a received signal has no data, then no position data is displayed.
TIP: “RX RPT1” setting may differ, depending on the way the call was made.
Example 1: When a Local area call is received.
caJMllin1gZLyKou…
JM1ZLK calling you…
RXRPT2 RXRPT1
CALLED
JcMa1llZinLgKyou…
CALLER
YOUR STATION
Example 2: When a Gateway call is received.
JPJM1Y1IZULKpocrat Alli.n..g from
RXRPT2
GW RXRPT1
INTERNET
CALLED
JJMP11ZYLIKU cpaolrlitnAg..f.rom
YOUR STATION
JM1ZLK calling from JP1YIU port A…
CALLER
L To exit the MENU screen, push [MENU].
5-20
5 D-STAR OPERATION (ADVANCED)
BK mode communication
The Break-in (BK) function enables you to break into a conversation, where the
2 stations are communicating with Digital Call Sign squelch (DSQL) enabled. L
The BK function is automatically turned OFF when you
turn OFF the transceiver.
[MENU] > SET > DV Set > BK
1. While 2 stations are communicating in the DV mode, hold down [RXCS] for 1
second. · After releasing [RXCS], the calling station’s call sign or the
repeater’s call sign is set to “TO” (Destination). · Beeps sound, and the
calling station’s call sign is announced. L When a call sign is not received
correctly, error beeps sound, and no call sign is set.
2. Push [MENU]. 3. Select “DV Set” in the SET menu.
4. Select “BK.” 5. Select “ON.” 6. Push [MENU].
· Returns to the Standby screen and “BK” is displayed. 7. When both stations
are in standby, push [PTT] to
transmit. L “BK” blinks when receiving a Break-in call. L To cancel the BK
mode, select “OFF” in step 5, or
turn OFF the transceiver.
How to use Break-in?
While using the Digital Call Sign squelch (DSQL), the squelch never opens (no
audio is heard) even if a call is received, unless the call is addressed to
your call sign. However, when a call including the “BK ON” signal (break-in
call) is received, the squelch opens, and audio is heard even if the call is
addressed to another station.
Station C calling to Station A with “BK OFF” Station A and B are communicating using the Digital Call Sign squelch.
Station C calling to Station A with “BK ON” Station A and B are communicating using the Digital Call Sign squelch.
Station A
Station B
Station C
Station B does not hear that Station C is calling Station A.
Station A
Station B
Station C
Station B also hears that Station C is calling Station A.
5-21
5 D-STAR OPERATION (ADVANCED)
EMR communication
The Enhanced Monitor Request (EMR) communication function can be used in only
the DV mode. Using the EMR function, no call sign setting is necessary.
L Information · All transceivers that can receive an EMR signal
automatically receive the signal. DO NOT use this function except in the case
of an emergency. · When an EMR signal is received, the audio (voice) is heard
at the set level, even if the volume setting level is set to the minimum
level. · The EMR communication function is automatically turned OFF when you
turn OFF the transceiver.
[MENU] > SET > DV Set > EMR
Example: Transmitting from the “Hirano” repeater using the EMR function.
1. Push [MENU]. 2. Select “DV Set” in the “SET” menu.
DAdjusting the EMR AF level
The audio output level when an EMR signal is received is adjustable between 0
and 39. When an EMR signal is received, the audio is heard at the preset
level, or the [VOL] control level, whichever is higher. To turn OFF the
setting, set to “0.”
[MENU] > SET > DV Set > EMR AF Level 1. Push [MENU]. 2. Select “DV Set” in the
“SET” menu.
3. Select “EMR AF Level.”
3. Select “EMR.” 4. Select “ON.” 5. Push [MENU].
4. Rotate [DIAL] to adjust the EMR audio output level between 0 (OFF) and 39
(maximum). (Default: 19)
L To exit the MENU screen, push [MENU].
· Returns to the Standby screen and “EMR” is displayed. Push [PTT].
· The TX/RX indicator lights red while transmitting. L “EMR” blinks on a
station that receives the EMR
signal. The audio (voice) is heard at the set level, or the [VOL] level,
whichever is higher. L To cancel the EMR mode, select “OFF” in step 4, or turn
OFF the transceiver.
5-22
5 D-STAR OPERATION (ADVANCED)
Automatic DV detection
If you receive an FM signal while in the DV mode, the “DV” and “FM” icons
alternately blink to indicate the received signal is FM. When the DV Auto
Detect function is ON, the transceiver automatically selects the FM mode to
monitor it temporarily. (Default: OFF) L Regardless of this setting, the “DV”
and “FM” icons
alternately blink if you receive an FM signal while in the DV mode.
NOTE: When Digital Call Sign squelch (DSQL), or Digital Code squelch (CSQL) is
selected, the transceiver does not receive FM signals, even if this function
is ON. You can silently wait for calls from others.
[MENU] > SET > DV Set > DV Auto Detect 1. Push [MENU]. 2. Select “DV Set” in
the “SET” menu.
3. Select “DV Auto Detect.”
4. Select “ON.”
L To exit the MENU screen, push [MENU]. L When an FM signal is received while
in the DV mode,
the “DV” and “FM” icons sequentially blink, and the transceiver receives the
signal in the FM mode.
When an FM signal is received while in the DV mode
DV Auto Detect function: OFF The “DV” and “FM” icons alternately blink, but
the audio cannot be heard.
DV Auto Detect function: ON The “DV” and “FM” icons alternately blink, and the audio can be heard.
The icons alternately blink.
You cannot hear the audio.
The icons alternately blink.
Thanks for the nice QSO!
You can hear the audio!
5-23
5 D-STAR OPERATION (ADVANCED)
Automatic Reply function
When a call addressed to your call sign is received, the Automatic Reply
function sounds beeps and automatically replies with your call sign. (Default:
OFF) Depending on the setting, a recorded message may be transmitted with the
call sign. NOTE: The Automatic Reply function temporarily sets the received
call sign to “TO” (destination). TIP: To record the Auto Reply message You can
record the Auto Reply message. See page 5-25 for details. ([MENU] > RECORD >
DV Auto Replay)
[MENU] > SET > DV Set > Auto Reply 1. Push [MENU]. 2. Select “DV Set” in the
“SET” menu.
3. Select “Auto Reply.”
5. Push [MENU]. · Returns to the Standby screen, and displays ” .” L When
“ON” or “Voice” is selected, the Automatic Reply function is automatically
turned OFF when you push [PTT]. When “Position” is selected, the Automatic
Reply function remains ON, when you push [PTT].
Example: After receiving a call from “JM1ZLK,” beeps sound, and the
transceiver automatically sends a reply call.
4. Select an option.
The “TO” setting does not change, but “UR: JM1ZLK (Caller’s call sign)” is displayed.
· ON: Automatically replies with your own call sign. (No audio reply is sent)
· Voice: Automatically replies with your own call sign and an Auto Reply
message recorded on the microSD card (up to 10 seconds). L If no SD card is
inserted, or no message is recorded, replies with only your own call sign (No
audio reply is sent).
· Position:Automatically replies with your call sign and your position data
using the internal GPS receiver. L When “GPS Select” is set to “OFF” or
“Manual,” the internal GPS receiver is temporarily turned ON.
5-24
5 D-STAR OPERATION (ADVANCED)
Automatic Reply function
DRecording an Auto Reply message
You can record the Auto Reply message that is saved on a microSD card to reply
to the call with your voice. NOTE: Confirm a microSD card is in the card slot.
[MENU] > RECORD > DV Auto Reply 1. Push [MENU]. 2. Select “DV Auto Reply” in
the RECORD menu.
3. Hold down [PTT] to start a recording, release it to stop recording.
The DV AUTO REPLY screen
Audio level is displayed
Adjust the Mic gain so that the REC Level does not reach to this range ([MENU]
SET > Function > MIC Gain (Internal), MIC Gain (External))
TIP: To delete the recorded message, push [QUICK] on the DV AUTO REPLY screen, then select “Clear.”
L Information · The maximum recording time is 10 seconds. · Hold the
microphone 5 ~ 10 cm (2 ~ 4 inches) from your
mouth, then speak at your normal voice level. · Only 1 message can be
recorded. The current contents are
overwritten if you record again.
4. To exit the MENU screen, push [MENU] twice.
5-25
5 D-STAR OPERATION (ADVANCED)
Automatic Reply function
DAuto Position Reply function
When you receive a call addressed to your call sign, but are in a situation
that makes it difficult to operate the transceiver, this function sounds beeps
and automatically replies with your call sign and transmits your position
data.
After receiving the Auto Position Reply call, the caller’s position data is
displayed in a window. L Icom transceivers display the position after
receiving a
call. L You can turn OFF the caller’s position display. (p. 12-26)
([MENU] > SET > Display > Reply Position Display) Except for the ID-31A/E,
IC-9100, ID-880H/E880,
IC-80AD/E80D, IC-92AD/E92D, IC-2820H/E2820, ID-800H, IC-91AD/E91, IC-V82,
IC-U82
1. A call addressed to your call sign.
JA3YUA
2. Your position data
Your station
is automatically transmitted.
Destination (ID-52A/E PLUS)
3. After receiving, the position data is displayed on the destination’s transceiver.
When no valid position data is received
After receiving a call addressed to your call sign, the internal GPS receiver
is temporarily turned ON for approximately 5 minutes to receive your position
data, even if “GPS Select” is set to “OFF” or “Manual.” Then, the transceiver
automatically replies with a message, as described below. ([MENU] > GPS > GPS
Set > GPS Select) L When the internal GPS receiver is temporarily ON, and
valid position data is received, the transceiver transmits your position data
if a call addressed to your call sign is received again.
Reply message list when no valid position data is received
Message No Position
Status
When no position data is received.
Old Position
2 minutes or more has passed since receiving position data.
No Posi & GPS Start
The internal GPS receiver is temporarily turned ON but has not received your position data yet.
Old Posi & GPS Start
The internal GPS receiver is temporarily turned ON, and 2 minutes or more have passed since receiving position data.
Scrolls your call sign or the TX message. L Your status message may be
displayed.
TIP: · The position data is transmitted according to the
“GPS TX Mode.” (p. 6-12) · When the “GPS TX Mode” settings are incorrect
for the Automatic Reply function, the transceiver automatically corrects them
to reply to a call. · When “GPS TX Mode” is set to “OFF,” “D-PRS” is
automatically selected.
5-26
5 D-STAR OPERATION (ADVANCED)
Data communication
In addition to digital voice communication, you can send and receive data.
Also, you can use the DV Fast Data function for data communication (p. 5-28)
To send and receive data, a USB cable (user supplied) and a data communication
software (user supplied) are required. L Confirm your USB cable is usable for
data transfer and
not for charging only. L Confirm that the USB cable’s driver is installed on
your
PC.
NOTE: “DV Data TX” is set to “Auto” as the default setting. When you enter
text data into your communication software, the transceiver may automatically
transmit it, depending on the software and the software settings.
DConnection
Connect the transceiver to your PC using a USB cable, as shown below.
Transceiver
To the [USB] port
PC
To the USB port
Supplied USB cable (Type-C/Type-A)
L Confirm your USB cable fits the transceiver’s USB port (Type-C) and your
PC’s USB port.
NOTE: Before you start sending data, BE SURE to set the following items. · Set
“GPS Out (USB Port)” to “OFF ”
([MENU] > GPS > GPS Set > GPS Out (USB Port)) · Set “USB Connect” to
“Serialport,”
([MENU] > SET > Function > USB Connect) · Set “USB Serialport Function” to “DV
Data.”
([MENU] > SET > Function > USB Serialport Function)
DData communication application setting
Set the communication software, as shown below.
· Port:
The COM port number that is used by the
ID-52A/E PLUS*
· Baud rate: Your desired speed
· Data:
8 bit
· Parity:
none
· Stop:
1 bit
· Flow control: Xon/Xoff
- Depending on the PC environment, the COM port number
used by the ID-52A/E PLUS may be higher than 5. In that
case, use an application that can set it to higher than 5.
DSending data
1. Set your call sign, the destination call sign, and the repeater call sign.
2. Follow the instructions of your data communication application software.
3. When you enter text data into your communication software, the transceiver
may automatically transmit it, depending on the software and its settings. L
When “DV Data TX” is set to “PTT,” pushing [PTT] transmits the text data and a
voice signal. (p. 12-10)
([MENU] > SET > DV Set > DV Data TX) L Before transmitting the data, the
transceiver sends a
carrier sense signal approximately 500 milliseconds.
NOTE: · Only ASCII code can be used for data
communication. · The transceiver also has the Message
Transmission function that transmits up to 20 characters. (p. 5-17) ·
Depending on the combination of your PC and your communication software, some
data may be lost. · While receiving voice or data through the Internet, some
packets may be lost due to network error (poor data throughput performance) In
such a case, an “L” is displayed on the screen to indicate that packet loss
has occurred.
5-27
5 D-STAR OPERATION (ADVANCED)
Data communication
DDV Fast Data function
To send data using the DV Fast Data function, follow the instructions below. L
DV Fast Data communication can be made by only the
following Icom transceivers (As of July 2024): · IC-705 · IC-905 · IC-9700 ·
ID-31A/E PLUS · ID-4100A/E · ID-5100A/E · ID-50A/E · ID-51A/E (PLUS, PLUS2,
50th Anniversary model) · ID-52A/E · ID-52A/E PLUS Usable only when firmware
versions CPU M 1.10, S 1.00, C 1.10, and DSP 1.10 or later are installed.
NOTE: If you want to send GPS data to other transceivers that can receive only
slow-speed data, set “GPS Data Speed” to “Slow.” (p. 12-11) ([MENU] > SET > DV
Set > DV Fast Data > GPS Data Speed)
[MENU] > SET > DV Set > DV Fast Data > Fast Data
1. Push [MENU] 2. Select “DV Set” in the “SET” menu.
About the display type
You can enlarge the characters, such as the repeater name displayed by the DR
function. L This setting can be used only when the Single band
display is selected. 1. Display the Main screen that you want to change
in the Single band display.
2. Push [QUICK]. 3. Select “Display Type.”
4. Select “Large.”
3. Select “DV Fast Data.”
4. Select “Fast Data.”
· The characters, such as the repeater name, are displayed larger.
5. Select “ON.”
· To exit the MENU screen, push [MENU].
5-28
5 D-STAR OPERATION (ADVANCED)
Digital squelch functions
The digital squelch opens only when you receive a signal addressed to your own
call sign or a signal that includes a matching digital code. You can silently
wait for calls from others. You can independently set the Digital squelch
function in the VFO mode, Memory mode, Call channel mode, or DR function.
DThe Digital Call Sign squelch setting
1. Push [QUICK]. 2. Select “D.SQL.”
DThe Digital Code Squelch setting
1. Push [QUICK]. 2. Select “D.SQL.”
3. Select “CSQL.”
3. Select “DSQL.”
“DSQL” is displayed.
“DSQL” is displayed.
4. Push [MENU]. 5. Select “DUP/TONE…” in the “SET” menu. 6. Select “Digital Code.”
· When the received signal includes a matching call sign, the squelch opens,
and you can hear the audio.
L When the received signal does not include a matching call sign, the digital
call sign squelch does not open. However, the S/RF meter displays the received
signal level.
NOTE: · DO NOT use the Digital Call Sign Squelch
function when communicating with 2 or more stations, because it opens only
when receiving a signal addressed to your call sign. Therefore the function
can be used when communicating with only 1 station. · Even if the squelch is
closed by the Digital Call Sign Squelch function, you can receive data in the
DV mode.
7. Rotate [DIAL] to select a digital code.
· When the received signal includes a matching code, the squelch opens, and
you can hear the audio.
L When the received signal does not include a matching code, the digital code
squelch does not open. However, the S/RF meter displays the signal level.
L To exit the MENU screen, push [MENU]. NOTE: Even if the squelch is closed by
the Digital Code Squelch function, you can receive data in the DV mode.
5-29
5 D-STAR OPERATION (ADVANCED)
Repeater list
You can save repeater information for quick and simple communication in up to
2500 repeaters (repeater list) in up to 50 Groups. Data must be in the
repeater list to use the DR function. You can add and edit repeater content
and groups in the repeater list. You can enter 4 types of frequencies into the
repeater list, as shown below: · DV Repeater · DV Simplex · FM Repeater · FM
Simplex
TIP: · For easy operation, the repeater list is preloaded
into your transceiver. However, if you do an All Reset, the CPU deletes all
setting data, the Memory channels, and the repeater list. We recommend that
you back up the memory data to a microSD card or save it to a PC using the CS-
52PLUS programming software. · The repeater list can be downloaded from the
Icom website. See “Updating the repeater list” that can be downloaded from the
Icom website about how to update the repeater list using a microSD card.
https://www.icomjapan.com/support/
DRepeater list contents
The following contents are included in the repeater list:
· TYPE:
Communication type (p. 5-32)
· NAME:
Repeater name (p. 5-32)
· SUB NAME:
Repeater sub name (p. 5-32)
· CALL SIGN:
Repeater call sign and port letter
(p. 5-32)
· GW CALL SIGN: Gateway repeater’s call sign and port “G”
(p. 5-32)
· GROUP:
Repeater group (p. 5-33)
· USE (FROM): access repeater use (p. 5-33)
· FREQUENCY: access repeater’s frequency (p. 5-33)
· DUP:
Duplex direction (p. 5-33)
· OFFSET FREQ: Frequency offset (p. 5-33)
· MODE:
Operating mode (p. 5-34)
· TONE:
Tone setting (p. 5-34)
· REPEATER TONE: Repeater tone (p. 5-34)
· POSITION:
Position data accuracy level (p. 5-34)
· LATITUDE:
Latitude of the repeater (p. 5-34)
· LONGITUDE: Longitude of the repeater (p. 5-35)
· UTC OFFSET: UTC Offset (p. 5-35)
Example: “Hirano” repeater information
5-30
5 D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
This section describes how to manually enter new repeater information into the
repeater list. The required setting items differ, depending on your
communication usage. Confirm the required items, as shown below.
NOTE: To enter repeater information into the repeater list, the repeater’s
call sign must be entered first.
DRequired items for the communication cases
Repeater list contents
TYPE
NAME
Used as an access
Used as a
repeater
destination repeater
DV Repeater
DV Repeater
Used as an FM repeater
FM Repeater
SUB NAME
CALL SIGN
GW CALL SIGN
N/A
(For a Gateway call)
GROUP
USE(FROM)
FREQUENCY
DUP
OFFSET FREQ
MODE
N/A
N/A
TONE
N/A
N/A
REPEATER TONE
N/A
N/A
POSITION
LATITUDE
LONGITUDE
UTC OFFSET
: Must be entered
: Possible to enter
N/A: Not Applicable
Simplex (FROM)
DV Simplex
FM Simplex
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
5-31
5 D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
DEntering new information into the repeater list
Step 1. Selecting the repeater group
[MENU] > MEMORY > Repeater List
1. Push [MENU]. 2. Select “MEMORY” on the second page of the
MENU screen. 3. Select “Repeater List.”
Step 4. Entering the repeater sub name
1. Select “SUB NAME.” 2. Enter a sub name of up to 8 characters.
L See page iii on how to enter characters. 3. After entering, push [ENT].
Step 5. Entering the repeater call sign
L When Step 2. Selecting the communication type is set to “DV Simplex” or “FM
Simplex,” go to Step 7. Changing the repeater group.
1. Select “CALL SIGN.” 2. Enter the repeater call sign of up to 8 characters,
including spaces and the node letter.
4. Select a repeater group to add a repeater to.
· Displays the repeater list of the selected repeater group.
5. Push [QUICK]. 6. Select “Add.”
NOTE: BE SURE to add the repeater node letter in the 8th digit of the call
sign, according to the frequency band shown below. Note that there are almost
always different node letters between Japanese D-STAR repeaters and repeaters
in other countries. Cross band operation between different nodes at the same
repeater site can be made. · 1200 MHz: A (B in Japan) · 430 MHz: B (A in
Japan) · 144 MHz: C (no repeaters in Japan)
3. After entering, push [ENT].
· The REPEATER LIST EDIT screen is displayed.
Step 2. Selecting the communication type
1. Select “TYPE.” 2. Select the communication type.
· DV Repeater: Repeater operation in the DV mode. · DV Simplex: Simplex
operation in the DV mode. · FM Repeater: Repeater operation in the FM mode. ·
FM Simplex: Simplex operation in the FM mode.
Step 6. Entering the gateway repeater call sign
L This item is displayed when Step 2. Selecting the communication type is set
to “DV Repeater.”
L The 8th digit in the call sign entered in Step 5. Entering the repeater call
sign is automatically set to “G” as the gateway port, so you can skip this
setting and go to the next item.
1. Select “GW CALL SIGN.” 2. Enter a gateway repeater call sign of up to 8
characters, including spaces. L Only a space or “G” can be entered in the 8th
digit.
Step 3. Entering the repeater name
1. Select “NAME.” 2. Enter a name of up to 16 characters.
L See page iii on how to enter characters. 3. After entering, push [ENT].
3. After entering, push [ENT].
5-32
5 D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D Entering new information into the repeater list
Step 7. Changing the repeater group L The repeater group that is selected in
Step 1.
Selecting the repeater group is displayed. You can skip this setting and go to
the next item. To change the group, follow the steps described below. 1.
Select “GROUP.” 2. Select the repeater group. (01 ~ 50)
Step 10. Selecting the Duplex direction
L When Step 2. Selecting the communication type is set to “DV Simplex” or “FM
Simplex,” this item is not displayed.
L “DUP” is automatically set when the access repeater frequency is entered in
Step 9. Entering the access repeater frequency. If necessary, you can change
the Duplex direction.
1. Select “DUP.” 2. Select a Duplex direction.
Step 8. Setting “USE(FROM)” to be used as an access repeater
L You can use the entered repeater as an access repeater when using the DR
function. When not using as an access repeater, select “NO,” and go to Step
15. Selecting the position data accuracy level. In that case, the entered
repeater is not displayed in “FROM” on the DR screen.
1. Select “USE(FROM).” 2. Select “YES” to use the repeater as an access
repeater.
Step 9. Entering the access repeater frequency 1. Select “FREQUENCY.” 2.
Rotate [DIAL] to enter the repeater frequency.
· OFF: Turn the duplex function OFF. · DUP: The transmit frequency shifts
down from the
receive frequency by the offset amount. · DUP+: The transmit frequency shifts
up from the
receive frequency by the offset amount.
Step 11. Entering the frequency offset
L When Step 2. Selecting the communication type is set to “DV Simplex” or “FM
Simplex,” this item is not displayed.
L The offset value is automatically set when the access repeater frequency is
entered in Step 9. Entering the access repeater frequency. If necessary, you
can change the frequency offset. The default value differs, depending on the
transceiver version.
1. Select “OFFSET FREQ.” 2. Rotate [DIAL] to enter the frequency offset
(0.000.00 ~ 59.995.00 MHz).
L Push D-pad() to move the cursor. 3. After entering, push [ENT].
L Push D-pad() to move the cursor. 3. After entering, push [ENT].
5-33
5 D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D Entering new information into the repeater list
Step 12. Setting the FM mode L When Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is not displayed. 1. Select
“MODE.” 2. Select “FM” or “FM-N.”
Step 15. Selecting the position data accuracy level
L When the Near Repeater Search function is not used, or the distance between
your location and a repeater is not needed, select “OFF,” and go to Step 18.
Setting the UTC offset.
1. Select “POSITION.” 2. Select the position data accuracy level.
Step 13. Setting the tone L When Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is not displayed. 1. Select
“TONE.” 2. Select an option.
· OFF: Turn OFF the Tone function. · TONE: Select when the repeater requires
an access
tone. · TSQL: Select when you want to use the tone
squelch in simplex operation. Step 14. Selecting the repeater tone frequency L
When Step 2. Selecting the communication type
is set to “DV Repeater” or “DV Simplex,” this item is not displayed. L This
setting is required when Step 13. Setting the tone is set to “TONE” or “TSQL.”
- Select “REPEATER TONE.” 2. Rotate [DIAL] to select the repeater tone
frequency, and then push [ENT].
· None:
Select when the repeater has no
position data.
· Approximate: Select when the entered position data
is approximate.
· Exact:
Select when the entered position data
is exactly correct.
Step 16. Entering the latitude
L This item is displayed only when Step 15. Selecting the position data
accuracy level is set to “Approximate” or “Exact.”
1. Select “LATITUDE.” 2. Rotate [DIAL] to enter the latitude.
L Push D-pad() to move the cursor. L To enter a north latitude, select “N,”
and to enter a
south latitude, select “S.” 3. After entering, push [ENT].
5-34
5 D-STAR OPERATION (ADVANCED)
Entering new information into the repeater list
D Entering new information into the repeater list
Step 17. Entering the longitude L This item is displayed only when Step 15.
Selecting the position data accuracy level is set to “Approximate” or “Exact.”
- Select “LONGITUDE.” 2. Rotate [DIAL] to enter the longitude.
Step 19. Saving the repeater list
1. Select “<
2. Select “YES.”
L Push D-pad() to move the cursor. L To enter an east longitude, select “E,”
and to enter a
west longitude, select “W.” 3. After entering, push [ENT].
Step 18. Setting the UTC offset
L Universal Time Coordinated (UTC) offset is the time difference between UTC
and repeater local time. This is a useful function to know the repeater’s
local time before you make a call. (p. 5-13)
1. Select “UTC OFFSET.” 2. Rotate [DIAL] to set the time difference between
UTC and the local time, then push [ENT].
· The entered contents are saved to the repeater list, and the display returns
to the selected repeater group screen.
TIP: To cancel the entered data 1. Push [CLR] to display the “Cancel edit?”
window. 2. Select “YES.”
· Cancels the entry and returns to the selected repeater group screen.
5-35
5 D-STAR OPERATION (ADVANCED)
Repeater list operation
DEditing repeater data
You can edit repeater data. This is useful when already-entered data is
incorrect, has changed, or some data needs to be added to the list.
[MENU] > MEMORY > Repeater List 1. Push [MENU]. 2. Select “MEMORY” on the
second page of the
MENU screen. 3. Select “Repeater List.”
4. Select a repeater group where the repeater you want to edit is listed.
DDeleting repeater data
[MENU] > MEMORY > Repeater List 1. Push [MENU]. 2. Select “MEMORY” on the
second page of the
MENU screen. 3. Select “Repeater List.”
4. Select a repeater group where the repeater you want to delete is listed.
5. Select a repeater you want to edit, and then push [QUICK].
6. Select “Edit.”
5. Select the repeater to be deleted, and then push [QUICK].
6. Select “Delete.”
7. Select an item, and then edit it. L See pages 5-32 ~ 5-35 for details.
8. After editing, select “<
· The confirmation dialog is displayed. 9. Select “YES.”
· The confirmation dialog is displayed. 7. Select “YES.”
· The selected repeater contents are deleted from the repeater list and return
to the selected repeater group screen.
L To exit the MENU screen, push [MENU]. NOTE: The currently selected repeater
on the DR screen cannot be edited or deleted. To edit or delete the repeater,
select another repeater on the DR screen.
· The edited contents are saved to the repeater list and
return to the selected repeater group screen.
L To exit the MENU screen, push [MENU].
5-36
5 D-STAR OPERATION (ADVANCED)
Repeater list operation
DRearranging the display order of the repeaters
You can move the entered repeaters to rearrange their display order in the selected repeater group.
[MENU] > MEMORY > Repeater List
1. Push [MENU]. 2. Select “MEMORY” on the second page of the
MENU screen. 3. Select “Repeater List.”
8. Select the position to insert the repeater you want to move the repeater above.
4. Select a repeater group where the repeater you want to move is listed.
L While moving, “DESTINATION” blinks at the top left of the screen.
5. Select the repeater to be moved.
L DO NOT push [ENT]. 6. Push [QUICK]. 7. Select “Move.”
· The selected repeater is inserted above the destination repeater name.
L If “<
L To exit the MENU screen, push [MENU].
5-37
5 D-STAR OPERATION (ADVANCED)
Repeater list operation
DAdding new repeater information from RX History
1. Hold down [CD] for 1 second. · The RX HISTORY screen is displayed.
2. Push D-pad() to display the repeater you want to
add to the repeater list, then push [ENT].
8. Select “YES.”
· Displays the RX history detail screen. 3. Push D-pad() to display “RXRPT1” and “RXRPT2.”
· The repeater contents are added to the repeater list, and the display
returns to the RX HISTORY screen.
L To exit the RX HISTORY screen, push [MENU].
4. Push [QUICK]. 5. Select “Add To RPT List.”
6. Select the repeater call sign that you want to add to the repeater list.
· Displays the REPEATER LIST EDIT screen. The selected repeater call sign is
automatically entered.
L If the selected repeater is already in the repeater list, “Duplicate Call
Sign” is displayed.
L See pages 5-32 ~ 5-35 to edit the contents. 7. Select “<
· The confirmation dialog is displayed.
5-38
5 D-STAR OPERATION (ADVANCED)
Repeater list operation
DSkip setting for the DR scan
You can set repeaters as scan skip repeaters. The selected repeaters are
skipped for faster scanning. You can set the skip setting to all repeaters in
the selected repeater group or individual repeaters. L When a repeater is set
as a skip repeater, its “USE
(FROM)” setting is automatically set to “NO.” In that case, the repeater
cannot be selected in “FROM” (access repeater) on the DR screen.
5. Select the repeater to be skipped, and then push [QUICK].
6. Select “SKIP.”
L Displays “SKIP” by the selected repeater.
L Displays “SKIP” in the “FROM” field.
L Select “SKIP” again to cancel the skip setting. L Select “SKIP All ON” to
set the skip setting to all
repeaters in the group.
5-39
5 D-STAR OPERATION (ADVANCED)
Repeater list operation
DEntering or editing a repeater group name
[MENU] > MEMORY > Repeater List
1. Push [MENU]. 2. Select “MEMORY” on the second page of the
MENU screen. 3. Select “Repeater List.”
8. After entering [ENT].
4. Select a Repeater group that you edit the name.
· Sets the entered name. L To exit the MENU screen, push [MENU].
L DO NOT push [ENT]. L If you select an already named group, the name is
overwritten. 5. Push [QUICK]. 6. Select “Edit Name.”
7. Enter a group name of up to 16 characters.
Selectable characters and symbols A to Z, a to z, 0 to 9, ! ” # $ % & ‘ ( ) *
- , – . / : ; < = > ? @ [ ] ^ _ ` { | } ~ (space)
L See page iii on how to enter characters.
5-40
5 D-STAR OPERATION (ADVANCED)
Your Call Sign
DEntering Your Call Sign
You can manually enter a Your (destination) Call Sign. When a Your Call Sign
is entered into “TO,” you can make a call to the station, even if you do not
know where the station is currently located. Up to 300 “Your Call Signs” can
be entered.
[MENU] > MEMORY > Your Call Sign Example: Entering “Rick/JM1ZLK” to the Your
Call
Sign memory.
1. Push [MENU]. 2. Select “MEMORY” on the second page of the
MENU screen. 3. Select “Your Call Sign.”
9. Select “CALL SIGN.”
10. Enter a call sign of up to 8 characters, including spaces.
11. After entering, push [ENT]. 12. Select “<
4. Push [QUICK] on the YOUR CALL SIGN screen. 5. Select “Add.”
· The confirmation dialog is displayed. 13. Select “YES.”
6. Select “NAME.”
7. Enter a station name of up to 16 characters.
L See page iii on how to enter characters. 8. After entering, push [ENT].
· “Rick JM1ZLK” is entered into the Your Call Sign memory.
L To exit the MENU screen, push [MENU].
5-41
5 D-STAR OPERATION (ADVANCED)
Your Call Sign
D Entering Your Call Sign
TIP: To cancel the entered call sign 1. Push [CLR] to display the “Cancel
edit?” window. 2. Select “YES” to cancel the entry and return to
the YOUR CALL SIGN screen.
DDeleting Your Call Sign
[MENU] > MEMORY > Your Call Sign
1. Push [MENU]. 2. Select “MEMORY” on the second page of the
MENU screen. 3. Select “Your Call Sign.”
To edit the entered call sign To edit the entered call sign, select “Edit” in step 5. This is useful when already-entered data is incorrect, has changed, or some data needs to be added to the list.
4. Select a call sign you want to delete.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Delete.”
· A confirmation dialog is displayed. 7. Select “YES.”
· The selected call sign is deleted from the Your Call Sign list and the
returns to the YOUR CALL SIGN screen.
L To exit the MENU screen, push [MENU].
NOTE: The currently selected Your Call Sign on the DR screen cannot be edited
or deleted. To edit or delete the Your Call Sign, select another Your Call
Sign on the DR screen
5-42
5 D-STAR OPERATION (ADVANCED)
Your Call Sign
DRearranging the display order of Your Call Signs
You can move Your Call Signs to rearrange their display order. If the stations
you often communicate with are moved to the top of the list, it is easy to
find them.
[MENU] > MEMORY > Your Call Sign
Example: Moving “Rick” above “Eddy.” 1. Push [MENU]. 2. Select “MEMORY” on the
second page of the
MENU screen. 3. Select “Your Call Sign.”
7. Select the position to insert the Your Call Sign you want to move the call sign above.
4. Select a Your Call Sign to be moved.
L While moving, “DESTINATION” blinks at the top left of the screen.
L DO NOT push [ENT]. 5. Push [QUICK]. 6. Select “Move.”
· The selected call sign is inserted above the destination call sign.
L If “<
L To exit the MENU screen, push [MENU].
5-43
5 D-STAR OPERATION (ADVANCED)
Are your settings correct?
If you make a Local Area call with a gateway repeater still selected in “TO,”
the destination repeater will be busy while you transmit. The stations that
want to use the repeater as their access repeater cannot access it, as shown
below.
BE SURE to set CQCQCQ in “TO” on the DR screen when you intend to make a Local
Area call or finish a Gateway call.
Example: JA3YUA wants to make a Local Area call.
CQ D-STAR Hirano, this is JA3YUA through JP3YHH port A for a local call…
Caller (JA3YUA)
JA3YUA’s setting
CJQAfo3DrY-aSUlToAActRahlrHocauirlgal.hn..oJ,Pt3hYisHisH port A
Hirano area
The destination (“TO”) setting is incorrect. Correct setting
INTERNET
Called
His setting is wrong! I can’t access the repeater!
foJCrAaQ3YloDUc-AaSlTtchAarRoll.u.H.gihraJnPo3,YthHisHisport A
Hamacho area
NOTE: With this setting, you can make a Local Area call, but the destination
Repeater, selected in “TO,” is also busy while you transmit. The stations that
want to use the repeater as their Access Repeater cannot access it.
To make a Local Area call, set the destination (“TO”) to “CQCQCQ.” See page 5-9 for details.
5-44
Section 6
GPS OPERATION (ADVANCED)
GPS operation features ………………………………………………………………..6-2 Before starting GPS
operation……………………………………………………….6-3
D Confirming the GPS signal receiving………………………………………………….6-3 GPS TX mode and
TX format types ……………………………………………….6-4 Difference between older models
…………………………………………………..6-4 When a received signal contains position data
………………………………..6-5 Checking your location …………………………………………………………………6-5
D Displaying Position Data ………………………………………………………………….6-5 D GPS POSITION
screens and their meanings ……………………………………..6-6 D About the RX screen
……………………………………………………………………….6-7 D Setting the display type (MAIN/SUB)
…………………………………………………6-8 D About the Course ……………………………………………………………………………6-8 D
About the Grid Locator …………………………………………………………………….6-9 D Changing the GPS
Memory or Alarm …………………………………………………6-9 D Changing the Compass
Direction…………………………………………………….6-10 D Saving your own or a received station’s
position………………………………..6-10 Checking GPS information (Sky view
screen)……………………………….. 6-11 Transmitting D-PRS data…………………………………………………………….6-12
D D-PRS …………………………………………………………………………………………6-12 D Operating in the D-PRS
mode…………………………………………………………6-12 D Displayed items
…………………………………………………………………………….6-13 D Setting D-PRS Position (Mobile/Base)
……………………………………………..6-14 D Setting D-PRS
Object/Item……………………………………………………………..6-15 D Setting D-PRS
Weather………………………………………………………………….6-16 D Weather station transmission
………………………………………………………….6-17 D Application setting
…………………………………………………………………………6-17 D Confirming the weather data input
…………………………………………………..6-17 D About the weather data content
………………………………………………………6-17 D Displaying your location using mapping software
………………………………6-18 Transmitting NMEA data……………………………………………………………..6-20 D Setting
the GPS data sentence ……………………………………………………….6-20 D Setting a GPS message
…………………………………………………………………6-21 GPS Automatic Transmission .
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>