medela 101034638-2022-03 Stylish Pump with MaxFlow and Breastmilk Collector Instruction Manual

medela 101034638-2022-03 Stylish Pump with MaxFlow and Breastmilk

Collector

Intended use

To collect, store, warm and feed breast milk.

Important safety information

Read all instructions before use SAVE THIS INSTRUCTION MANUAL For the babys child safety and health – WARNING

Caution

• Always use this product with adult supervision.
• Never use feeding teats as a soother.
• Continuous and prolonged sucking of fluids will cause tooth decay.
• Always check food temperature before feeding.
• Do not warm liquid in a microwave oven as this may cause uneven heating and could scald your baby.
• Inspect before each use and pull the feeding teat in all directions. Throw away at the first signs of damage, mould or weakness.
• Do not leave the product in direct sunlight or heat, or leave in disinfectant (“sterilizing solution”) for longer than recommended, as this may weaken the teat.
• Never leave packaging and components unattended. Keep them out of reach of children.
• Don’t use the liquid if bottles or components become damaged.
• Use the product only for its intended use as described in this instruction manual.
• Use by more than one baby without adequate reprocessing may present a health risk and could cause cross-contamination.
• Please do not shake the bottle up and down, as it might cause the liquid to spray out.
• For optimum performance and hygiene reasons, we recommend replacing teats at least every 3 months, or earlier in case of damage or weakness.
• Do not use metal or sharp objects inside the bottle and with other parts (e.g. for stirring contents or cleaning) – this may damage them.
• Also, bottles and component parts may become damaged if mishandled, e.g. dropped, over-tightened, or knocked over.
• Glass bottles may break easily. When the glass bottle cracks or shatters, sharp edges and shards may cause an injury. Take appropriate care in handling bottles and components.
• The glass bottle becomes very hot after exposure to high temperatures (e.g. boiling or warming). Please take appropriate care when handling bottles to avoid scalding.
• Do not heat closed bottles, as the pressure in the bottle will increase and might lead to damage, e.g. cracks, explosion.
• Avoid exposing the bottle to high-temperature differences, e.g. putting a cold bottle directly into boiling water or cooling down hot bottle in ice. This may cause bottle damage.
• The glass bottle may be slippery, especially when wet. Please take appropriate care when handling.

Important information

• The glass bottle is heavier than a polypropylene bottle. Please take appropriate care when holding the bottle, e.g. for pumping or feeding.
• Use Medela original accessories only. Use only Medela accessories contained in the packaging to close the bottle.
• Do not store the glass bottles in the freezer.

Instructions for assembly

1. Make sure you thoroughly wash your hands before handling the teat, the bottle and other parts.
2. Parts to assemble. Pull the teat through the collar. Ensure that the teat is properly placed in the collar. Screw on the collar with the teat on the bottle. If required, you can put the cap on. When properly closed, it will “click”. For storage purposes, you can use the collar and the disc. Insert the disc into the collar until it clicks. Screw the lid onto the bottle.

Cleaning and hygiene

Important

• Only use drinking-quality water for cleaning.
• Reprocess all parts prior to first use to ensure hygiene.
• Clean all parts immediately after use.
• Do not use abrasive or aggressive products for cleaning. Detergents and other cleaning solutions may e.g. fade the print on the bottle. We recommend replacing bottles if the print has faded.
• Make sure to wash your hands thoroughly before handling the bottle, teat and other components to avoid cross-contamination.

Before first use and once a day

• Clean the product as described under “After each use”.
• Disinfect the product as described under “Disinfection”.

After each use

• Disassemble the bottle with teat into its individual parts.
• Rinse all parts with cold water (approx. 20°C). Clean all parts with plenty of warm, soapy water (approx. 30°C). Use a commercially available washing-up liquid, preferably without artificial fragrances and colouring. Rinse all parts with cold water (approx. 20°C).
• Dry with a clean cloth or leave to dry on a clean cloth.
• Alternatively, clean the product in the dishwasher. Place the parts on the top rack or in the cutlery section. Use a commercially available dishwashing detergent

Disinfection

• Cover all parts with water and boil for five minutes.
• Dry with a clean cloth or leave to dry on a clean cloth.

Storage

Put the clean parts in a clean storage bag or a clean environment. It is important that all residual moisture dries. Do not store parts in an airtight container/bag

Storing and thawing breast milk

• Before expressing breast milk, mums should wash their hands with soap and water or an alcohol-based hand sanitiser. The pump parts, bottles and pumping area must be clean. Breasts and nipples do not need to be washed before pumping.
• These guidelines for storage and thawing of breast milk are a recommendation. Contact your midwife or lactation consultant for further information.
• We do not recommend storing the glass bottle in the freezer. For freezing, please use polypropylene bottles or breast milk bags according to their instructions for use.

Warming

Other food heating, cleaning, storage and use methods, different than the one recommended, have not been validated, are not applicable and may damage the product. Do not warm breast milk in a microwave or in boiling water. This is to avoid vitamin and mineral loss and hot spots in the milk that could scald your baby. To warm the milk, you can hold the bottle under warm water (max. 37 °C). Gently swirl the bottle to mix any fat that has separated.Avoid shaking or stirring the milk.

Material
Bottle body: Borosilicate glass. Collar, disc, cap: polypropylene; teat: silicone.

Package content

• Breast milk bottle (glass) contains: bottle, collar and disc.
• Breast milk bottle (glass) with teat contains: bottle, collar, disc, cap and a teat.

Disposal
According to local regulations.

Symbols on the packaging

Caution

• Can lead to minor injury
• Do keep the device away from sunlight.
• Do keep the device dry.
• Do handle the fragile device with care.
• Do follow instructions for use.
• Manufacturer
• The packaging contains products intended to come in contact with food.
• Recycling Code PP
• Recycling Code PET
• General symbol for recovery/recyclable

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>