Pyle PSDNL22YL Portable Multifunctional Hand Crank Lantern User Manual

Pyle PSDNL22YL Portable Multifunctional Hand Crank Lantern

PRODUCT OVERVIEW

1. Handle
2. AM/FM band switch
3. LED Light Button
4. Alarm Button
5. Tuner
6. Volume Switch
7. DC Jack
8. Sound Vent
9. Earphone Jack
10. Power Switch
11. Battery Slot
12. Hand Crank

LED Light

• 4 LED lights will be on when pressing the LED Light button once.
• 12 LED lights will be on when pressing the LED light button twice.
• All LED lights will be off when pressing the LED light button once again.

Alarm Function

• Press the Alarm Button to open this function when you want call for help.

Radio

• Choose the AM or FM band first. Then move the Volume switch to turn on the radio and adjust the tuner to get desired channel.

Frequency:

• AM: 540KHz —1600KHz
• FM: 88MHz—108MHz

Power

1.  When the Power Switch is in the DRYCELL position, you can use the internal drycell batteries to provide power.
2. When the Power Switch is in the DYNAMO position, you can wind up the crank (clockwise) to charge the drycell batteries inside the lantern.
3. You can also use 3 AA batteries to power or the outer DC 6V power DC jack to charge the lantern.
4. Output power: Use a special connection wire, connect one side of the wire to your DC device and the other side and connect to the DC jack. Then rotate the crank to charge the DC device. (Only applicable to 6V DC devices with proper cable)

Attention

1. Please don’t drop or hit the lantern.
2. Please take out the battery from the battery slot when you don’t use the lantern for a long time
3. To avoid damage the battery inside the lantern, please don’t charge the lantern over 5 hours by the outer DC power source.
4. When you wind up charging the lantern, please don’t use any function of the lantern.
5. Please only use recommended rechargeable batteries when recharging the lantern

Specification

• AM: 540 KHz—1600 KHz
• FM: 88MHz—108MHz
• DC: 6V
• Use 3 X AA battery

PRODUCT USAGE

The Pyle PSDNL22YL is a portable hand crank lantern with many functions designed to give illumination in a variety of settings, particularly in circumstances when normal power sources are not accessible. You can use the product in the following ways:

Optional Charging and Power Sources:

• Charging through USB:
  There is a possibility that the lantern has a USB charging port. You might need to charge the lantern using a USB cord and a USB charger or power source that is compatible with it before you use it for the first time.

• Charging with a Hand Crank:
  This lantern has a number of interesting qualities, one of which is the fact that it can be charged by turning a hand crank. Turning the crank handle will cause electricity to be generated and will charge the battery contained therein.

• Light Modes:
  The lantern most likely has a number of different lighting modes, including a flashing mode for use in case of an emergency and a strong LED light that may be used for illumination.

• Use Only in an Emergency:
  When there is a need for dependable lighting in the great outdoors, such as during power outages, crises, camping, hiking, or other outdoor activities, this lantern is especially helpful.

• Charging with a Hand Crank:
  You can re-charge the lantern’s battery in the event that it has run out of power by manually turning the hand crank for an extended period of time. This may come in particularly handy in circumstances in which there is neither access to electricity nor wires for charging devices.

• Design That Is Both Convenient and Space-Saving:
  Because to its small size and portable construction, the lantern is very convenient to carry everywhere. It is appropriate for use in survival kits, trekking supplies, and camping equipment.

• A Note about Hanging and Positioning:
  It’s possible that the lantern has a built-in handle or hook for hanging it up. You can suspend it somewhere that requires illumination, such as within a tent, on a branch of a tree, or another suitable location.

• Functionality of the Power Bank (if it is applicable):
  There is a possibility that some iterations of this lantern will include a power bank function. In the event of an unexpected power outage, you can use it to charge any USB devices you have, such as your smartphone or tablet.

• Maintainability over a Long Period of Time:
  The longevity of both the built-in battery and the LED lights ought to be satisfactory. Maintaining the lantern’s charge on a consistent basis will guarantee that it is always ready for action when required.

• Utilization in Several Types of Settings:
  The lantern is adaptable and can be utilized in a variety of settings, including excursions in the great outdoors, camping trips, times of crisis, and even as an additional source of lighting in the home.

• Considerations Regarding the Environment:
  The fact that the lantern can be recharged with a hand crank makes it an environmentally beneficial option because it eliminates the requirement for using disposable batteries.

• Guarantees and After-Sales Service:
  In the event that you require assistance with the product, you should review the warranty and support information provided by the manufacturer.

PRECAUTIONS

• Learn from the Guide:
  Read through the user handbook and the safety guidelines that were provided by the manufacturer and get familiar with them. You will gain a better understanding of how to correctly and safely use the light if you read this.

• Precautions to Take Before Charging:

  • Use the USB cable that comes with the lantern in conjunction with a USB charger or power source that is compatible with the lantern while charging it via USB.
  • Take care not to overcharge the lantern. After it has reached its maximum capacity, you should unplug it from the charger.

• Charging with a Hand Crank:
  It is important to avoid exerting excessive force when manually cranking the lantern to charge it because doing so could potentially cause damage to the internal components.

• Safety of Batteries:

  • Do not make any attempts to open the case of the lantern or to tamper with any of the components found inside, most notably the battery.
  • In the event that the lantern’s battery cannot be removed, the appropriate disposal procedures must be carried out in accordance with the legislation that are in effect in the area.

• Cranking Without Danger:
  Turn the hand crank at a pace that is easy for your wrists and fingers. Do not turn the handle too quickly or roughly, as this could result in inefficient power generation and could possibly cause the mechanism to get damaged.

• Security Concerning Light Sources:
  To avoid any momentary discomfort or strain on your eyes, you should avoid gazing directly at the LED light source, especially when it is operating at its maximum brightness.

• Heating and Air-Conditioning:
  It is important to keep in mind that the lantern could produce heat if it is covered while it is being used. Make sure there is adequate airflow to avoid the temperature from becoming too high.

• The Conditions of the Environment:
  Even though the lantern could be intended for use outside, you should still take care not to subject it to severe weather conditions such as prolonged exposure to water or heavy rain, since this could cause the lantern to get damaged.

• Keeping Things Safe and Up to Date:

  • When not in use, the lantern should be kept in a dry and cold location.
  • Maintaining a consistent cleaning schedule for the exterior of the lantern will avoid the accumulation of dirt and debris.

• Utilization within the Appropriate Contexts:
  Even though it is portable and multifunctional, you should only use the light in appropriate settings. It should not be used in spaces that contain combustible items or in situations that could potentially be dangerous.

• Usage Guidelines for Children:
  Make sure that children who are using the lantern are under adult supervision at all times, but especially when they are turning the hand crank or otherwise manipulating the lantern.

• Guarantees and After-Sales Service:
  You should keep the warranty and support information from the manufacturer close to hand in case you require assistance or have questions regarding the lantern.

FREQUENTLY ASKED QUESTIONS

What is the Pyle PSDNL22YL Portable Multifunctional Hand Crank Lantern?

The Pyle PSDNL22YL is a portable lantern that features a hand crank for generating power, making it suitable for outdoor activities and emergencies.

What are the main functions of this hand crank lantern?

The lantern serves as a portable light source, and its hand crank allows you to recharge it manually.

What type of light source does this lantern use?

The lantern typically uses LED lights, which are energy-efficient and provide decent brightness.

How does the hand crank charging feature work?

You can generate power by manually cranking the built-in hand crank, which charges the internal battery and powers the lantern.

Is the Pyle PSDNL22YL suitable for camping or outdoor activities?

Yes, this lantern is designed for outdoor use, making it useful for camping, hiking, and other outdoor adventures.

What is the maximum brightness level of the lantern's LED lights?

The maximum brightness can vary, but it's often around 100-200 lumens.

Is there a solar charging option in addition to the hand crank?

Some models might include a solar panel for additional charging options, but it's important to check the specifications.

How long does the lantern need to be cranked to fully charge the battery?

The charging time can vary based on the model and the speed of cranking. Typically, a few minutes of cranking can provide several minutes of light.

Can I use this lantern as a power bank to charge other devices?

Some models might come with a USB output that allows you to charge small devices like smartphones using the lantern's battery.

What is the runtime of the lantern on a single charge or crank?

The runtime can vary, but it's often around 30 minutes to a few hours, depending on the brightness setting.

Is there a built-in handle for carrying or hanging the lantern?

Yes, most versions of this lantern include a built-in handle or hook for easy carrying and hanging.

Can I adjust the brightness levels of the lantern's LED lights?

Some models might offer adjustable brightness settings, while others may have fixed brightness levels.

Is the Pyle PSDNL22YL Lantern suitable for emergency situations?

Yes, this lantern can be used in emergency situations where access to power is limited.

What is the weight and size of the lantern?

The weight and size can vary, but these lanterns are generally compact and lightweight for easy portability

Is the lantern suitable for indoor use as well?

Yes, you can use this lantern indoors during power outages or as an extra light source.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>