BEGA 50 603.1 LED Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 50 603.1 LED Wall Luminaire
Product Information
Instructions for use
DIMENSION
Product Description
Safety
FEATURES
Installation
Cleaning Maintenance
Spares
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 50 603.1 LED Wall Luminaire

Product Information

Safety: The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Overvoltage Protection: The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547. To achieve additional protection against transients, etc., we recommend separate overvoltage protection components. You can find them on our website at www.bega.com.

Lamp Module Connected Wattage: 16.2 W
Luminaire Connected Wattage: 19.3 W
Rated Temperature: ta max = 25°C
Ambient Temperature: ta = 50°C
Module Designation: 2x LED-0800/930
Colour Temperature: 3000 K
Colour Rendering Index (CRI): CRI > 90
Module Luminous Flux: 2510 lm
Luminaire Luminous Flux: 1806 lm
Luminaire Luminous Efficiency: 93.6 lm/W
Product Usage Instructions:

Installation:

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.

Replacement of the LED module:

The designation of the LED module is noted on a label in the luminaire.
The light color and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire.
Please follow the installation instructions for the LED module.
The defective glass must be replaced.
Close the luminaire.

Instructions for use

Application

Wall luminaire · indoor luminaire with integrated power supply unit for many lighting tasks in interior applications.
The light emits upwards and downwards.

DIMENSION

$BEGA-50-603-1-LED-Wall-Luminaire-fig- $1$$

Product Description

Luminaire made of aluminium alloy
Finish Colour velvet white
Safety glass
Reflectors made of anodised pure aluminium 2 elongated fixing holes
Width 5 mm · 76,5 mm spacing
1 cable entry for mains supply cable up to
ø 10.5 mm max. 5 x 1.5@
Connecting terminal 2.5@ with plug connection
Earth conductor connection
2-pole connection terminals for digital control BEGA Ultimate Driver®
LED power supply unit
220-240 V x 0/50-60 Hz
DC 176-276 V
DALI-controllable
Basic insulation is provided between the mains and control cables
BEGA Thermal Control®
Temporary thermal regulation to protect temperature-sensitive components without switching off the luminaire
Safety class I
Impact strength IK07
Protection against mechanical impacts < 2 joule
Safety mark
Conformity mark
Weight: 2.1 kg
This product contains light sources of energy efficiency class(es) E

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician.
The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.

Overvoltage protection

The electronic components installed in the luminaire are protected against overvoltage in accordance with DIN EN 61547.
To achieve an additional protection against e. g. transients, etc. we recommend separate overvoltage protection components.
You can find them on our website at www.bega.com.

FEATURES

Lamp

Module connected wattage 16.2 W
Luminaire connected wattage 19.3 W
Rated temperature ta = 25 °C
Ambient temperature ta max = 50 °C

50 603.1 K3

Module designation 2x LED-0800/930
Colour temperature 3000 K
Colour rendering index CRI > 90
Module luminous flux 2510 lm
Luminaire luminous flux 1806 lm
Luminaire luminous efficiency 93,6 lm / W

50 603.1 K4

Module designation 2x LED-0800/940
Colour temperature 4000 K
Colour rendering index CRI > 90
Module luminous flux 2550 lm
Luminaire luminous flux 1834 lm
Luminaire luminous efficiency 95 lm / W

Light technique

Wide beam rotationally symmetrical light distribution
Half beam angle 39°

Installation

LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping.
Undo set screw and lift off luminaire housing. Loosen push plug connection and earth connection (plug connection).
Pass the power connecting cable through the cable entry in the mounting plate. Note position of application of the mounting plate “arrow down”.
Fasten the mounting plate with the supplied fastening material or other suitable fastening material to the installation surface.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection to terminal (plug connection).
The two connecting terminals marked DA, DA are provided for digital control purposes.
If these terminals are not assigned, the luminaire will work with full light output. Make earth conductor connection between luminaire housing and mounting plate.
Push plug into coupler as far as it will go. Install luminaire housing over mounting plate and tighten set screw.
Note position of application of the luminaire “arrow down”.

Cleaning Maintenance

Clean luminaire regularly with solvent-free cleansers from dirt.

Replacement of the LED module

The designation of the LED module is noted on a label in the luminaire.
The light colour and light output of BEGA replacement modules correspond to those of the modules originally fitted.
The module can be replaced by qualified persons using standard tools.
Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module.
Defective glass must be replaced.
Close the luminaire.