RODE HS2 Blitzstart Headset Microphone User Guide

RODE HS2 Blitzstart Headset Microphone User Guide

Parts

1. Microphone Capsule
2. Stainless Steel Boom Arm
3. Hypoallergenic Silicone Ear Clip
4. Boom Arm Holder
5. Adjustable Headband
6. Cable Strain Relief
7. Removable Cable Management Clip
8. 1.2m Kevlar Reinforced Cable
9. 3.5mm TRS Mic Output
10. Removable TRS Locking Nut
11. Foam Pop Shield (Not shown)
12. Mini Fur Wind Shield (Not shown)

Changing Boom Arm Orientation

The Boom Arm can be mounted on either the left or right of the HS2 to suit your presentation style.

1. To remove, fi rst compact the HS2 by minimising the headband width at each side and detaching the cable from the Cable Management Clip.
   

2. A) Slide the Boom Arm forwards through the Boom Arm Holder. A small rectangle stopper will prevent you from going too far.
   
   B) Detach the Boom Arm from the Boom Arm Holder by unclipping at the rearmost point.

3. When loose, lift the Boom Arm up and above the Ear Clips to remove.
   

4. A) To fi t, lower the Boom Arm from above and inside the Ear Clip.
   B) Fit the Boom Arm into the Boom Arm Holder track.
   

5. Position the rectangle stopper at the most forward point, and clip into place at the rearmost point.
   

6. Clip cable into Cable Management Clip and return the Boom Arm and Headband to original positions.
   

warranty.rode.com/hs2

Protect Your HS2. Register online now for your 5-year extended warranty.

Thank you for purchasing the
HS2

Scan the QR code or visit rode.com/hs2 for more infomation on the HS2

quickstart guide
HS2
HS2 Blitzstart
HS2 – Prise en main
Guía de inicio rápido de HS2

References

• HS2 | Lightweight Headset Microphone | RØDE

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>