packed party PKDJ200 Party Speaker User Guide

packed party PKDJ200 Party Speaker User Guide

What’s In the Box?

A. 1 party speaker

B. 1 charging cable

C. 1 AUX cable

D. 1 quick start guide

E. I warranty card

Device Overview

1. Power
   Power on./off your device.

2. LED Screen

3. Mode
   Press to switich modes. (Bluetooth /  USB / FM Radio Memory Card / AUX)

4. Light Mode
   Press and hold to turn on/off light mode.
   Press to switch between the 5 lighting presets.

5. Bass Boost
   Press to turn the subwoofer on/off.

6. Karaoke Mode
   Press to eliminate the original vocals

7. Volume up/down
   Turn knob to adjust volume.

8. Previous
   Press and hold to rewind playback. In FM mode, press and hold to manually search for low frequency channels.
   Press toplay the previous track. InFM mode, press to select the previous channel.

9. Play/Pause
   In FM mode, press and hold to automatically search for radio channels. In Bluetooth* mode, press and hold for TWS pairing or unpairing.
   Press to play. Press again to pause.

10. Next
    Press and hold to fast forward playback. In FM mode,
    press and hold to manually search for high frequency channels.
    Press to ploy the next track. In FM mode, press to select the next channel.

11. AUX IN
    Stream music from external devices via the included AUX cable.

12. Memory Card slot
    Stream music from a memory cord (sold separately).

13. Microphone
    Connect a microphone (sold separatelyj to sing along to your favorite songs.

14. USB Input
    Stream music from your USB flash drive (sold separotelyj.

15. Charging Port
    Charge your speaker by connecting the included charging cable to a power source.

Charging Your Device

Please fully charge your device before using for the fint time. Use the included charging cable to connect your device to a power source.

NOTE
Please charge the battery at least once per month to maintain optimal battery performance. If the battery is stored fora long period without being charged. battery life may be shortened.

Initial Setup

1. Once your device is fully charged, press and hold the ‘ POWER button to turn it on. Your speaker will enter Bluetooth• pairing mode automatically and “bf” will flash on the screen.

2. On your smartphone or tablet, search for the Bluetooth* device named “Turn It Up Porfy Speaker” and top to connect.

3. A sound will play once pairing is successful, and “bf” will stop flashing on the screen.
   

Bluetooth• Mode (BT)

After initial Bluetooth* pairing, your speaker will automatically connect to the previously paired device when turned on.

To pair your speaker fo a new device:

1. Disable Bluetooth• on your previously connected device.
2. Press the MODE button on your speaker to switch to Bluetooth” mode. “bf” will flash on the LED screen, indicating that pairing mode is activated.
3. On the new smartphone you wish to pair, search for the Bluetooth• device named “Nrn It Up Porfy Speaker” and tap to connect.
4. A sound will play once pairing is successful, and “bt” will stop flashing on the screen. You are now ready to slream music from your new device.

USB Mode

Insert a flash drive or other USB device (sold seporotelyj into the USB input. The speaker will automatically detect USB playback and will begin to play music files.
Press the CODE bufion to exit USB mode.

Memory Cord Mode

Insert a memory card (sold separatelyj into the memory card slot. The speaker will automatically detect memory cord playback and will begin to play music files.
Press the MODE button to exit memory cord mode.

Porfy Sync Mode (TWS)

This device features TWS (TnJe Wlreleu Slereo) technology, which allows you to play music on two Packed Parly parly speaker simultaneously, creating a surround sound experience.

1. Make sure both speakers ore turned on, Bluetooth” mode is enabled, and that both speaker ore not connected to other devices.
2. Press and hold the PI.AY button on either unit. A prompt will play, indicating thot pairing is successful.
3. The speaker thot flashes is the primary speaker (the other speaker will not flash, indicating that it is the secondary speaker).
4. You may now connect your mobile device as usual. Content will ploy on both speaker.
5. Press and hold the PLAY buWon to disable Party Sync mode.

AUX Mode

Connect your external device to the AUX input at the back of the party speaker via the included AUX cable to enter AUX mode and start streaming audio from your device. Press the MODE button to exit AUX mode.
NOTE: An AUX cable must be connected to detect AUX mode

FM Mode

1. Press the MODE button to enter FM mode.
2. Press the PLAY button to ploy/pause FM radio. Press and hold the PLAY button to automatically search for channels.
3. Press the PREVIOUS or NEXT buttons to select the previous or next channel.
4. Press and hold the PREVIOUS or NEXT buttons to manually search for low or high frequency channels.

The Specs

Model: PKDJ200
*Bluetooth: Bluetooth” 5.0
Waterproof Rotlng: IPXS
BM Output Power: 20W
Worldng Dlslonce: 32.8 ft (10 meters)
Battery: 7.4V / 2000mAh
Speaker Diameter: 5″Middle & Boss Speaker  1.5″TrebIe Speaker
KN2201
 
Bluetooth•
**

WARNING: Listening to loud audio for extended periods of time may damage your hearing permanently

Need Help?

For customer support regarding your device, please submit a request by emailing supportGdpoudlovldeo.zendesk.com. You will be provided a ticket number regarding your inquiry, which you can refer to when contacting us further.
You may also reach a DPAV customer service representative by calling 1-633-909-2673. We are available Monday – Frlday, 9om – Spm PST, except major holidays. DPAV strongly urges customer to email their inquiry prior to calling, as this will enable us to better assist you.
Please make sure to note the model number and a description of your inquiry.
Thank you for purchasing a Packed Party product.

FCC

This device compiles with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any Interference received, including Interference that may cause undesired operation.

Caution: Changes or modifications to this product not expressly approved by Me party responsible for compllance could void the users authority to operate the equipment.

This equipment has been tested and found to comply w’th the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. Th’s equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmfu interference to radio communications. However, there is no guarantee that interference will not occur in a particular -nstallation. It this equipment does cause harmful interference to radio or television recept’on, which can be determined by turnir g the equipment off and on, the user is encouraged to fry to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

To maintain compliance with FCC’s RF exposure guidelines, this equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body.

Designed in Austin, Texas. Made in China. All designs 02022 Packed Party, Inc. C 2022 DP Audio Video LLC. All Rights Reserved. 0 2022 Bluetooth SIG, Inc. All rights reserved. The Bluetooth° trademarks—Including the BLUETOOTH word mark, the figure mark (the runic “B” and oval design), and the combination mark (Bluetooth word mark and design)—are owned by the Bluetooth SIG. IJSB Is used to solely describe the compatibility of our technology and in no way is intended to infringe on any intellectual property rights of any respective protected marks. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. this device must accept any Interference received, including interference that may cause undesired operation.

1 year warranty from date of purchase, 90 days only on labor. Manufactured/imported by DP Audio Video LLC. Distributed by DP Audio Video LLC. Los Angeles, CA. 3205 Industrial Terrace, Suite 200, Austin, Texas 78758. Packed Party is a registered trademark of Packed Party, Inc.

SCAN ME WITH YOUR SMARPHONE FOR EXCULSIVE

PARTY HOW-TO TIPS DOWNLOADS, & MORE!
FOLLOW THE PARTY@PACKEDPARTY
LIFE’ A PARTY
WHEN YOUR MAKE IT ONE!
WWW.PACKEDPARTY.COM

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>