Pro sKit TE-8202A-W Fiber Optic Fusion Splicing Machine User Manual
- June 12, 2024
- Pro sKit
Table of Contents
Pro sKit TE-8202A-W Fiber Optic Fusion Splicing Machine User Manual
Main Features
- 5 inches high resolution colorful LCD display, image can be turned according to position
- Average splice time: 10 second
- Average tube-heat time: 30 second
- Lithium battery: Rechargeable and up to 180 times of continuous splice and heat after fully charged
- Separately X or Y axis views with 500 times magnification and Cutting-edge technology for image processing
- New core alignment technology, the core alignment is more accurate
- New developed technology providing strong wind and dust resistance
- Working mode: Auto & Manual & Full-Auto
- Micro USB Port
- Storing 10,000 groups of latest splice results.
- Storing 100 groups of splice images
- Multipurpose optical fiber fixture ( 3-in-1 fixture and SC/LC/FC connector fixture, patented technology)
Specifications
Model no. | TE-8202A-W | TE-8202F-W |
---|---|---|
Applicable fiber | SMMMNZDS, EDF | SMMMNZDS, EDF |
Average splice loss | 0.02dB(SM)0.01dB(MM), 0.04dB(NZDS), 0.04dB(ED) |
0.02dB(SM)0.01dB(MM), 0.04dB(NZDS), 0.04dB(ED)
Splice time| 10s (SM)| 10s (SM)
Suitable for cutting optical fiber length| 1016mm| 1016mm
Suitable for optical fiber| Cladding diameter:80-150m, core Coating
diameter:100-1000m| Cladding diameter:80-150m, core Coating diameter:100-1000m
Return lose| 60dB| 60dB
Fiber image magnification| 500 times for single X or Y view; 250 times for X
and Y
view| 500 times for single X or Y view; 250 times for X and Y
view
Tension test| 2.0N(200gf)(standard)| 2.0N(200gf)(standard)
Splice program| 50 groups| 50 groups
Electrode life| 6000 times| 6000 times
Protection sleeve length| 20mm~60mm| 20mm~60mm
Storage of splice result| 10000 groups of splice results| 10000 groups of
splice results
Storage of splice image| 100 groups of splice images| 100 groups of splice
images
Monitor| 5 high resolution colorful LCD| 5 high resolution colorful LCD
Communication port| Micro USB| Micro USB
Working lighting| 1 LED light| 1 LED light
Power indication| 4 LED indication| 4 LED indication
Operation condition| Temperature: -10~+50 Humidity0~95%RH Altitude 0~5000m|
Temperature: -10~+50 Humidity0~95%RH Altitude 0~5000m
Standard plug| A type| F type
Power supply| Lithium battery: 10.95V/6Ah Adapter: INPUT AC 100~240 50/60Hz;
OUTPUT: DC15V/5A| Lithium battery: 10.95V/6Ah Adapter: INPUT AC 100~240
50/60Hz;
OUTPUT: DC15V/5A
Dimension(W x D x H)| 155 x 145x 145mm| 155 x 145x 145mm
Weight| 1.98Kgs (include battery) 1.6Kgs(not include battery)| 1.98Kgs
(include battery) 1.6Kgs(not include battery)
Package Contents
- Machine x 1pc
- AC Adaptor x1pc
- Optical fiber splicing fixture (3-in-1)x1set
- Battery x1pc
- Spare electrodes x 1set
- Protection sleeve(60mm) x 25pcs
- Cooling tray x 1pc
- Operation manual x 1pc
- Carrying belt x 1pc
- Carrying case with carrying strap x 1pc
- Disk (with communication program, driver and instructions)
Quick Reference Guide
The guide is for the basic operation. For the detailedinformation,please refer to http: www.prokits.com.tw
-
Power Supply: Two ways of supplying power to the fusion splicer: a. internal battery b. AC power supply. Pleaseturnofffusion splicer before operation.
-
Insert battery: Insert the battery into the battery groove. Make sure it is properly fixed.
-
Remove battery: Push the battery out
-
Using AC Adaptor : Put the plug into socket as matching the anchor point.
-
Turning on Splicer Power Press power button to switch ON/OFF device.
-
Setting Fiber in Splicer
-
Open the windproof cover ;
-
Open the left and right sheath clamps;
-
Put the stripped fiber on the V-groove, and make sure the fiber end between groove edge and electrode (as pic).
-
Holding the fiber and close the sheath clamps carefully. If the fiber is not properly set, pleaseadjust it;
-
Repeat the steps 3.3 and 3.4 for second fiber;
-
Close the windproof cover
-
Splicing Operation
-
manual /Auto / Full-auto you can choose the operation model in operation menu. Manual: Fusion splicing operate step by step controlled by the operator via the keypad.
Auto: Press the button, it will automatically coretocore alignment and fusion splicing.
Full-auto: Automatically operation after closed the wind proof cover -
Fiber type: SM/MM/NZDS/ED
-
Pause function:
Turn on the pause function: under auto and Full-auto mode, after core to core aligning the fiber, splicing machine will stop, then press button, thes plicer began to fuse.
Turn off: no effect any splicing mode operation.
-
Take out the fiber and heat the fiber
-
Open the heater cover;
-
Open the windproof cover ;
-
Open the right and left sheath clamps;
-
Take out the fiber and move the fiber protection sleeve to the splice point. Make sure the splice point in the center of the fiber protection sleeve tube
-
Put the fiber protection sleeve on the heater, close the heater cover;
-
Press button, and red indicator light will light up;
-
When the indicator light off , it means that the heating is finished;
-
Open the heater cover, check if there are air bubblesinprotection sleeve;
-
Put the fiber on the cooling tray, until it coolingdown
PROKIT’S INDUSTRIES CO., LTD
https://www.prokits.com.tw
Email: pk@mail.prokits.com.tw
©2023 Prokit’s Industries Co., LTD. All rights reserved 2023001(C)
Please scan QR code or visit https://www.prokits.com.tw for detail manual
TE-8203A-W
TE-8202A-W
TE-8202F-W
PROKIT’S INDUSTRIES CO., LTD
https://www.prokits.com.tw
Email: pk@mail.prokits.com.tw
©2023 Prokit’s Industries Co., LTD. All rights reserved 2023001(C)
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>