BEGA 34786 Ceiling and Wall Luminaire Instruction Manual
- June 12, 2024
- BEGA
Table of Contents
**BEGA 34786 Ceiling and Wall Luminaire Instruction Manual
**
Application
Ceiling and wall luminaire · indoor luminaire made of hand-blown opal glass,
satin matt and metal housing, for all lighting tasks.
They are ideal for places where a soft and uniform lighting distribution is
required.
Luminaire with a high protection class.
Lamp
Luminaire with screw base E 27
Lamp output max. 3 × 40 W
This product contains light sources of energy efficiency class E
Supplied lamp
3 × BEGA LED lamp 13548
LED Retrofit 7 W · 805 lm · 2700 K
dimmable
Supplied lamp
3 × BEGA LED lamp 13586
LED Retrofit 7 W · 805 lm · 3000 K
dimmable
Luminaire efficiency: 64%
Detailed technical and lighting data for the lamps can be found in the data sheets on our website.
Product description
Luminaire made of aluminium alloy and
stainless steel, finish Colour white
Hand-blown opal glass, satin matt
2 mounting holes Ø 5mm
Distance apart 290mm
1 cable entry for mains supply cable
up to ø 10.5 mm max. 3 x 1.5@
Connection terminal 2.5@
Earth conductor connection
Lampholder E 27
Safety class I
Protection class IP 44
Protected against granular foreign bodies
≥ 1 mm and splash water
Impact strength IK04
Protection against mechanical
impacts < 0.5 joule
– Safety mark
– Conformity mark
Weight: 1.8 kg
Safety
The installation and operation of this luminaire are subject to national
safety regulations.
Installation and commissioning may only be carried out by a qualified
electrician.
The manufacturer accepts no liability for damage caused by improper use or
installation.
If subsequent modifications are made to the luminaire, the person responsible
for these modifications shall be considered the manufacturer.
Installation
Lead the mains supply cable through the cable entry into the luminaire back
housing.
Fix luminaire back housing with enclosed or any other suitable fixing material
onto the mounting surface.
It is imperative to use the enclosed gaskets.
Make earth conductor connection.
Push silicone sleeves over the lines and make electrical connection.
Insert lamp.
Insert the opal glass into the lower spring clips, centralise and push it into
the upper spring clips.
Relamping · Maintenance
Disconnect the electrical installation.
Pull glass out of the spring clips and remove from the luminaire back housing.
Clean luminaire back housing and glass.
Use only solvent-free cleansers.
Change the lamp.
Snap the glass into the lower spring clips, centralise and push it into the
upper spring clips.
Spares
Spare glass 11 002 173 .0RG
LED lamp 2700 K 13 548
LED lamp 3000 K 13 586
Lampholder 63 000 052
2/2 BEGA Gantenbrink-Leuchten KG · Postfach 3160 · 58689 Menden · info@bega.com · www.bega.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>