70mai WT1004 Saphir Watch User Guide

70mai WT1004 Saphir Watch

70mai Saphir Watch

The 70mai Saphir Watch is a smartwatch that comes equipped with various features such as heart rate monitoring, barometer, microphone, and a display screen. It can be connected to your smartphone via Bluetooth to access additional features like notifications and Amazon Alexa.

Product Usage Instructions

1. Before using the watch, make sure to read the user manual carefully and retain it for future reference.
2. Charge the watch using the provided USB connector and charging accessory before initial use.
3. Download the 70mai Health app on your smartphone and log in to your account. Select ‘Add device’ and follow the instructions to add your watch. Make sure Bluetooth is enabled on your phone and the watch is well connected during pairing.
4. Swipe down from the top of the home screen to view notifications, swipe up from the bottom to open the control panel, and swipe left or right to switch widgets on the home screen. Swipe from the left edge to the right to go back on other pages.
5. Press and hold the upper button for 1 second to wake up Amazon = Alexa (not available in all countries). Press and hold for 3 seconds to turn on/off the watch, and press and hold for 15 seconds to force restart. Press the button during an exercise to pause/resume, and press and hold to end the exercise.
6. Press the lower button to switch to the next page during an exercise or to open a shortcut (Exercise list by default) when not in an exercise. Customize the shortcut via the 70mai Health app.
7. The screen will lock itself automatically when swimming. Press either button to unlock the screen.
8. For accurate heart rate monitoring, comfortably tighten the band around your wrist about one-finger width away from your wrist bone. Wearing the straps too loosely may impact the data collection by the heart rate sensor.
9. Refer to the online guide for detailed product information and descriptions of functions. Scan the QR code provided in the user manual to access the guide.

Note: The product and its functions may vary due to product enhancements. If you cannot find the watch while adding a device or cannot connect with it during use, press and hold the upper button for 3 seconds to restore factory settings and try again.

Product Overview

Read this manual carefully before use, and retain it for future reference.

1. Upper Button
2. Display Screen
3.  Lower Button
4. Microphone
5. Heart Rate Sensor Area
6. Contact Point
7. Barometer

Note: Illustrations of product, accessories, and user interface in the user manual are for reference purposes only. The actual product and functions may vary due to product enhancements.

How to connect

Download and install the 70mai Health app to better manage your watch, and log in to your 70mai Health account for more services.

1. Press and hold the upper button for 3 seconds to turn on the watch. Scan the QR code on the display screen with your phone, then download and install the 70mai Health app.
   You can also download and install the app from the app stores, or scan the QR code below.
   Note: The version of the app might have been updated, please follow the instructions based on the current app version.
   

2. Log into your 70mai Health account in the app, select Add device and follow the instructions to add your watch.

3. Allow the pairing request on the watch then wait until Paired successfully is displayed on the app, the pairing process is completed.

Notes:

• During pairing, make sure the Bluetooth is enabled on your phone and the watch is well connected with your phone.
• If you cannot find the watch while adding a device, or cannot connect with the watch during use, please press and hold the upper button for 3 seconds to restore factory settings, then try again.

How To Use

Screen Instructions

1. View notifications: Swipe down from the top on the home screen
2. Open control panel: Swipe up from the bottom on the home screen
3. Switch widget: Swipe left or right on the home screen
4. Go back: Swipe from the left edge to the right on other pages

Button Instructions

1. Press and hold for 1 second to wake Amazon Alexa.

2. Press and hold for 3 seconds to turn on/off.

3. Press and hold for 15 seconds to force restart.

4. Press to pause/resume during an exercise; press and hold to end an exercise.

5. Press to enter the function list from home screen.
   Note: Amazon Alexa is not available in all countries and regions. For more details, please check in the 70mai Health app or visit www.amazon.com /alexa-availability.

6. Press to stitch to the next page during an exercise;

7. Press to open the shortcut (Exercise list by default) when not in an exercise.

Note: You can customize the shortcut via 70mai Health app.

Screen Lock/Unlock
The screen will lock itself automatically when you start swimming; otherwise, mistouches may be generated.
To unlock the screen, press the upper button or the lower button.

User Guide

Scan the below QR code to access the online guide. The guide provides detailed product information including descriptions of functions. Please carefully read this guide before use in order to avoid damage due to incorrect use.

How To Wear

For daily use, comfortably tighten the band around your wrist about one-finger width away from your wrist bone. Ensure the heart rate sensor can collect data normally.
Note: Wearing the straps too loosely may impact the data collection by the heart rate sensor.

Charging

1. Place the watch on the charging accessory. Make sure the contact points both on the back of the watch and the charging accessory are making contact with each other.
2. Connect the charging accessory to a standard adapter at an output voltage of 5 V and an output current of 0.5 A or higher.

Notes:

• If the watch is unable to turn on after it has not been used for a while, it needs to be charged for about 1 minute before the charging icon is displayed.
• Wipe the watch’s contact points clean before charging so as to avoid residual sweat or moisture.

Disassembly

Adjust the position of the buckle according to the circumference of your wrist. If you need to remove the strap, refer to the figures below. Make sure you pull the strap after attaching it to ensure the strap is installed securely.

Specification

• Name: 70mai Saphir Watch
• Model: WT1004
• FCC ID: 2AOK9-WT1004
• Device Name: Bluetooth Device
• Display Screen: 1.78 inch AMOLED
• Resolution: 368 × 448
• Sensor: Heart rate sensor, accelerometer, gyroscope, geomagnetic sensor, barometric pressure sensor, ambient light sensor, capacitive sensor
• Wireless Connectivity: Bluetooth 5.0 BLE
• Battery Capacity: 320 mAh
• Satellite Positioning: GPS & GLONASS
• Compatible with: Android 4.4 & iOS 10 or above
• Rated Input: 5 V 0.5 A
• Item Dimensions: 50.1 × 37.3 × 9.8 mm (excluding strap and protrusions)

Safety Precautions

• When using the watch to measure your heart rate, please hold your wrist still.
• The watch has a water resistance rating of 5 ATM. However, this function is not permanent and may decline over time. The watch can be worn in the cold shower, swimming pool, or while swimming near the shore. However, it cannot be used in a sauna or while scuba diving.
• The screen of the watch does not support underwater operations. When the watch comes into contact with water, use a soft cloth to wipe away excess water from its surface before use.
• During daily use, avoid wearing the watch too tightly. Keep its contact area dry and regularly clean the strap with water. Immediately stop using the watch and seek medical assistance if the contact area on your skin shows signs of redness or swelling. Due to friction, wearing the watch for a long time during high-intensity exercise may cause skin irritation. If this is the case, please stop wearing the watch.
• Use the included charging accessory to charge the watch. Only use qualified or certified power adapter supplied by qualified manufacturers.
• Keep the power adapter, charging accessory, and watch in a dry environment while charging. Do not touch the power adapter or charging accessory with wet hands. Do not expose the power adapter, charging accessory, and watch to rain or other liquids.
• Please use the watch within a temperature range of 0°C to 45°C and store the watch within a temperature range of -30°C to 70°C. When the ambient temperature is too high or too low, the watch may malfunction.
• This watch is equipped with a built-in battery that cannot be removed. Do not disassemble the watch. Do not expose batteries or battery packs to sunlight, fire, or other conditions with extreme heat. There’s a risk of explosion if the battery is incorrectly installed. Only replace with the same or an equivalent type of battery.
• Do not disassemble, puncture, strike, crush or throw the battery into a fire.
• Never throw the watch or its battery into a fire so as to avoid an explosion.
• This watch is not a medical device, any data or information provided by the watch should not be used as a basis for diagnosis, treatment, and prevention of diseases.
• The watch and its accessories may contain small parts. To avoid choking or other hazards or damages caused by the children, keep the watch out of the reach of children.
• This watch is not a toy and should only be used by children under adult supervision.

Safety Information

Caution
Battery abuse or mishandling can cause overheat, liquid leakage, or an explosion. To avoid possible injury, do the following:

• Do not open, disassemble, or service any battery.
• Do not attempt to replace the internal rechargeable lithium batteries.
• Do not crush or puncture the battery.
• Do not short-circuit the battery, or expose it to water or other liquids.
• Keep the battery away from children.
• Keep the battery away from fire.
• Do not leave the battery in an extremely high-temperature environment or an extremely low air pressure environment.
• Stop using the battery if it is damaged, or if you notice any discharge or the buildup of foreign materials on the battery leads. We recommend that the batteries be charged about once every three months to prevent overcharge.
• Do not put the battery in trash that is disposed of in landfills. When disposing of the battery, comply with local laws or regulations.

FCC

Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

WEEE Information

All products bearing this symbol are waste electrical and electronic equipment (WEEE as in directive 2012/19/EU) which should not be mixed with unsorted household waste. Instead, you should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of waste electrical and electronic equipment, appointed by the government or local authorities. Correct disposal and recycling will help prevent potential negative consequences to the environment and human health. Please contact the installer or local authorities for more information about the location as well as terms and conditions of such collection points.

EU Declaration of Conformity

The manufacturer hereby, declares that this equipment is in compliance with the applicable Directives and European Norms, and amendments. The full text of the EU declaration of conformity is available at the following internet address:
https://help.70mai.asia/1193.html

Service: help@70mai.com
For further information, please go to www.70mai.com
Manufacturer: 70mai Co., Ltd.
Address: Room2220, building2, No.588, Zixingroad, MinHangDistrict, Shanghai, China

References

• All-guides – Innovative Search Service of Online Manuals
• Amazon.com: ALEX Toys
• Amazon Alexa – Learn what Alexa can do | Amazon.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>