MOEN YB1794CH Greenfield Towel Shelf User Manual
- June 12, 2024
- Moen
Table of Contents
GREENFIELD™ TOWEL SHELF
YB1794CH
YB1794CH Greenfield Towel Shelf
Tools Required : Phillips screwdriver, drill, 1/2″ drill bit for drywall,
level, tape
Hardware Kit Contents: 1 hex wrench, 4 metal toggle bolts, 4 washers, 4
screw caps
Note: Directions below are for installation into drywall.
Towel shelf
- Position the mounting template on the wall in the desired location. Using a level, align the template and tape it to the wall.
- Mark the 4 hole locations as indicated on mounting template.
- Drill 1/2″ holes in marked hole locations.
- Remove the template from the wall.
- Remove toggles from bolts and insert bolts through washers as shown.(Figures A& BE
- Rethread toggles to bolts (Figure CI.
- Attach towel shelf to wall by inserting toggles into drilled holes and tightening all bolts (Figure DI.
- Place decorative caps over the screw (x4)(Figure
Position bracket and drill holes as indicated
Level Line
Position bracket and drill holes as indicated if
24″
(610 mml)
| Repeat for other side
---|---
Repeat for other side| Repeat for other side
Repeat for other side| Installation Complete
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>