ULsee Qs19 Thermometer Smart Watch User Guide
- June 6, 2024
- ULsee
Table of Contents
ULsee Qs19 Thermometer Smart Watch
Instruction for Quick Us
Introduction to Parts
How to charge?
Please take the band out in the first charge, and charge by the corresponding
charger (charging method: as shown in below diagram, please place the band in
the charger, align two touch points of the charger,to charge).
Wearing method
- The watch is best worn behind the ulna styloid process;
- Adjust its size according to adjustment holes, and fasten the wristband buckle;
- The sensor should be close to skin, avoiding being moved
Notices in monitoring heart rate:
LED light of heart rate on the band back flashes; Sensor should be close to
skin, avoiding the external light to affect the accuracy of test;
Please keep clean in testing area, sweat or blot may affect test results.
On/off
- Have a long press on band for 3 seconds in shutdown and charging state to power on;
- Switch to shutdown interface in start-up state, and have a long press on shutdown interface for 3 seconds to power off.
Band Operation
- Slide to light up screen or switch display in start-up state;
- No operation default five-second screen, users can connect to the mobile APP to modify the screen time
- The factory default setting of the band (heart rate monitor for 24 hours). Users can turn on or off in the general settings of APP interface
How to install APP
Scan the following QR code or download and install GloryFit in application markets. Demands on Device: 1OS 8.0 or above; Android 4.4 or above, Bluetooth 4.0 is supported
Connect with device
It is required to correct by connecting with APP in first use. The band automatically synchronizes time after connecting successfully, otherwise, the step number and sleep data will be incorrect.
Bluetooth connection:After successful pairing, APP will automatically save band Bluetooth address. When APP is opened or operated in the background, it will automatically search and connect the band.
Data synchronization: manually drop APP main page down to synchronize data; the band can save offline date of 7 days. The more the data is, the longer the time to synchronize will be. It will take not more than 2 seconds to synchronize data. After synchronization, “synchronization finish” will be popped up.
APP functions and settings
Please set personal information after entering APP My- Personal Settable profile photo – sex -age – height- weight, personal information can enhance the accuracy of data. Customize personal exercise goals. With reasonable sports planning, you can enhance your body quality
Reminder Function
It is required to open reminder switch in APP setting center, and keep the successful connection state between your mobile phone and the band. Notify by shaking when there is message.
- Message reminder: the band will remind you by shaking and displaying icon after receiving messages. Please click to check.
- QQ reminder: the band will remind you by shaking and displaying icon after receiving Qa message. Please click to check.
- WeChat reminder: the band will remind you by shaking and displaying icon after receiving WeChat message, Please click to check.
- Smart alarm clock: you can set three alarm clocks. After successfully setting, it will synchronize to the band; smart alarm clock is silent, and reminds you by appropriate shaking. It can remind you in offine state.
- Sedentary reminder: The default reminder interval is one hour; in the connected state, after the user is turned on, if the user does not exercise within one hour, the watch will vibrate to remind the user to exercise.
- Other reminders: the band will remind you by shaking and displaying icon after receiving other messages such as emails. Please click to check.
- Goals reminders: when the step number reaches the goals set in APP, the band will remind you by shaking and displaying icon.
Main interface
Smart Watch has 6 main interfaces. On the main interface, press and hold for two seconds. After shaking. you can switch the dial left and right. After the APP is paired for the first time and connected, the bracelet will synchronize the time, date and week of the phone.
Information interface
Slide up on the main interface to view the information. The bracelet can save the 8 pieces of information recentiy pushed by the APP (if there is no message, it will stop at the message interface), click to turn the page, slide to the right to exit to return to the upper interface, Automatically delete already viewed information, there are all delete options at the bottom, slide down Return to live interface.
More Functions
The main interface slides down to enter the function setting interface, and slide up to exit to return to the main interface.
Body temperature interface
Switch to the body temperature interface to start automatic body temperature measurement, Valid value measured after 5 minutes, or you can set the automatic interval measurement in the APP. By default, 37.3 Cis the alarm threshold. You can also set the alarm threshold in the APP.
Status interface
Switch to the status interface to view the current step count, distance, and calorie status. The distance and calories are calculated and displayed according to the Current walking steps, the height and weight set by the APP personally.
Heart Rate
Switch to the heart rate interface and start to automatically detect the heart rate. After the test is completed, swipe to the right to exit the heart rate detection. You can also connect to the mobile APP to test on the heart rate interface.If the bracelet is not worn correctly or not worn, the heart rate detection is unsuccessful or does not work. In heart rate detection mode, the battery life of the bracelet will be reduced.
Sports Interface
Switch to the blood pressure interface to start automatic blood pressure measurement, switch the menu to re-measure.
Blood oxygen interface
Switch to the blood oxygen interface to start automatic measurement of blood oxygen, and switch the menu to re-measure
Motion interface
Switch to the sports interface, click this interface to enter the specific sports interface, including outdoor running, cycling, skipping rope, badminton, table tennis, tennis, mountaineering, walking, volleyball, cricket, rugby, hoOckey, dancing, spinning. Yoga, sit ups, indoor running, basketball, football, baseball, gymnastics, rowing, opening and closing jumps, and other 23 sports. Click on the sport item and start monitoring after three seconds. Swipe right and click “T’to end, right Slide back to the previous menu.
Sleep detection function
Switch to the sleep interface and check the sleep status. When you fall asleep, the bracelet will automatically detemmine to enter the sleep monitoring mode, automatically detect the length of your deep sleep / light sleep /wake up all night, and calculate your sleep quality (Note: Onily wearing the bracelet to fall asleep will have sleep data.)
Weather interface
Switch to the weather interface, you can view the weather and temperature conditions.
Stopwatch interface
Switch to the stopwatch interface, dick the interface to enter the timing interface, and slide to the right to retum to the upper-level interface when the timing is stopped.
Find phone interface
Switch to the search interface. When connected, press and hold the search phone interface, and the phone will send a ringtone reminder.
Set interface
- Adjust brightness: Click to choose different brightness, and it has four-gear brightness.
- Mobile phone search: Click the interface of mobile phone search in the connection state, and the mobile phone will send out a bell warning About: click the interface to check its fixed number and Bluetooth address.
- Restore: Have a long-press the interface for 3 seconds to reset all data, and the data in that day in APP will be reset as well (other historical data will be kept).
- Shut down:Have a long press on the interface for 3 seconds to power off.
Precautions
- Please prevent your bands from being shocked, and exposed under high temperature and blazing sun for a long time.
- Please don’t disassemble, repair or change the device.
- The device should adopt 5V500MA to charge, it is forbidden to charge with over-voltage power supply.
- It should be used within the temperature of 0 degrees – 45 degrees. It is forbidden to throw into fire, avoiding explosion.
- Please charge after drying the band with soft cloth, otherwise, it will corrode charging touch points, leading to charge fault.
- Please don’t touch chemical substance such as gasoline, cleaning solvent, propanol, alcohol or insect repellent.
- Please don’t use the product in high voltage and high magnetic environment.
- In case of sensitive dry skin or too-tight wearing, you may be uncomfortable.
- Please don’t take a hot bath by wearing it.
- Please dry sweat in your wrist timely for its possibility to lead to skin itch or allergy by long-time touch with soap, sweat, allergens or contaminated ingredients.
- In case of frequent use, it is suggested to clean weekly. Please wrap by wet clothes, and remove oil or dust by mild soap.
- Do not open more push without special requirements.
Common problem
How to do when it cannot connect with Bluetooth? (connection/failing re- connection or low speed while re-connection) Please confirm whether your device is 1Os8.0, Android 4.4 or above, and supports Bluetooth 4.0.
- It takes time differently for each connection caused by the signal interference of Bluetooth wireless connection. If it fails to connect for a long time, please confirm that you use it in environment without magnetic field or interference of multiple Bluetooth device.
- Turn on again after turning off the Bluetooth.
- Turn off the background applications of mobile phones or restart your mobile phones.
- Please don’t make your mobile phones connect with other Bluetooth device or functions at the same time.
- Please check whether the APP is operated normally in the background. Otherwise, it may fail to connect.
- How to do when it fails to search the band?
- Please make sure that the watch is powered and activated, and it is not bound to other mobile phones, bring the watch close to the phone. If it still does not work, please turn off the phone Bluetooth and restart the phone Bluetooth after 20 seconds.
- Make sure your phone turns on GPS.
- Why is the wristband tight when measuring heart rate?
- The band adopts the light-reflection principle. It collects the signal reflected Ito the sensor to calculate heart rate after the light penetrating in the skin. If you don’t wear it tightly, the surrounding light wil enter the sensor, and its accuracy will be affected .
Why can’t receive the notification while opening reminder function. Android phone: Make sure the phone and the watch are connected. After connecting, set the corresponding permission in the phone settings, allow the “GloryFit” app to access calls, text messages, contacts, and keep ” GloryFit” running in the background; if the phone is installed Security software, please add “GloryFit” as trust. Apple mobile phone: t is suggested to restart your mobile phone and connect again in case of no notifications after connection.
When connecting with the band again, you can receive the notification after click Pairing’ when ‘Biluetooth Pairing Request’ is popped up. Is the band waterproof?
It is waterproof with IP67 waterproof and dust-proof grade (normally, you can feel relieved to wear it in washing hands, running or washing cars)
Does the Bluetooth connection need to stay in ‘turn on’ state? Will data be kept if disconnection?
Data will be saved in the main body of the band prior to synchronizing data
(date within 7 days can be saved). When the mobile phone connects successfully
with the Bluetooth of the band, the data in your band will automatically
upload to mobile phone, please synchronize the date to mobile phone timely
Notice: if functions of incoming call or message notification are required to
be turned on, please keep Bluetooth in the connection state, the alarm clock
notification can work
FCC Cautions
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>