BEGA 24 036 Ceiling and Wall Luminaire Instruction Manual

: June 12, 2024
: BEGA

Table of Contents

BEGA 24 036 Ceiling and Wall Luminaire
Product Information
Dimension
Instructions for use
Safety
Replacing the LED module
References
Read User Manual Online (PDF format)
Download This Manual (PDF format)

BEGA 24 036 Ceiling and Wall Luminaire

Product Information

The Decken- und Wandleuchte (Ceiling and wall luminaire) is a high-quality lighting fixture suitable for various lighting tasks. It is made of an aluminum alloy and crystal glass, providing both durability and elegance. With an IP 65 protection class, it offers excellent resistance to dust and water.

The luminaire is equipped with LED modules that have different specifications:

Module K3: Colour temperature of 3000 K, colour rendering index (CRI) greater than 80, module luminous flux of 195 lm, luminaire luminous flux of 92 lm, and a luminaire luminous efficiency of 57.5 lm/W.
Module K4: Colour temperature of 4000 K, CRI greater than 80, module luminous flux of 200 lm, luminaire luminous flux of 94 lm, and a luminaire luminous efficiency of 58.8 lm/W.

For detailed lighting design data and compatibility with lighting design programs, you can visit the BEGA website at www.bega.com. It is important to note that the installation and operation of this luminaire should comply with national safety regulations. Only qualified electricians should handle the installation and commissioning process. The manufacturer does not accept liability for any damage caused by improper use or installation. If any modifications are made to the luminaire, the person responsible for the modifications will be considered the manufacturer.

Dimension

BEGA-24-036-Ceiling-and-Wall-Luminaire-FIG-1

Instructions for use

Application
Ceiling and wall luminaire with high protection class for a variety of lighting tasks.A luminaire made of aluminium alloy and crystal glass.

Lamp
- Module connected wattage 0.9 W
- Luminaire connected wattage 1.6 W
- Rated temperature ta = 25 °C
- Ambient temperature ta max = 55 °C
24 036 K3
- Module designation LED-0238/830
- Colour temperature 3000 K
- Colour rendering index CRI > 80
- Module luminous flux 195 lm
- Luminaire luminous flux 92 lm
- Luminaire luminous efficiency 57,5 lm / W
24 036 K4
- Module designation LED-0238/840
- Colour temperature 4000 K
- Colour rendering index CRI > 80
- Module luminous flux 200 lm
- Luminaire luminous flux 94 lm
- Luminaire luminous efficiency 58,8 lm / W

Product description
Luminaire made of aluminium alloy, aluminum and stainless steel BEGA Unidure® coating technologyCrystal glass, white insideSilicone gasket2 mounting holes ø 4.5 distance apart 60 mm1 screw cable gland for connecting cable up from ø 7–9,5 mm Connecting terminal 2.5@with plug connection earth conductor connection LED power supply unit 100-240 V y 50-60 Hz Safety class IProtection class IP 65Dust-tight and protection against water jets impact strength IK06Protection against mechanical impacts < 1 joule r – Safety mark c – Conformity mark Weight: 0.6 kg This product contains light sources of energy efficiency classes B
Lighting technology
Luminaire data for the DIALux lighting design program for outdoor lighting, street lighting and indoor lighting, as well as luminaire data inEULUMDAT and IES format, are available on the BGA website at www.bega.com.

Safety

The installation and operation of this luminaire are subject to national safety regulations. Installation and commissioning may only be carried out by a qualified electrician. The manufacturer accepts no liability for damage caused by improper use or installation. If subsequent modifications are made to the luminaire, the person responsible for these modifications shall be considered the manufacturer.
Installation
Undo locking screw and turn baffle as far as it will go. Remove baffle and glass from the luminaire base. LED are high-quality electronic components! Please avoid touching the light output opening of the LED directly during installation or relamping. Disassemble LED module. Lead the mains supply cable through the cable entry of the luminaire base. Note position of application of the luminaire »arrow down«. Fix luminaire base with enclosed or any other suitable fixing material onto the mounting surface. It is essential to use the enclosed ring gaskets. Tighten cable gland as far as it will go. Make earth conductor connection and electrical connection at the plug-in terminals. Attention: Note correct plug-in terminals configuration. Brown (L) and Blue (N) must not be interchanged. (Destruction of the LED) Assemble LED module. Make sure that gasket is positioned correctly. Insert glass into the shield frame in such a way that the flattened sides of the glass are in the region of the casting bars. Then turn glass in between the bars. Place baffle with glass onto the luminaire base and turn it clockwise as far as it will go. Tighten the locking screw.

Cleaning · Maintenance
Clean luminaire regularly with solvent-free cleansers from dirt and deposits. Do not use high-pressure cleaners.

Replacing the LED module

The designation of the LED module is noted on a label in the luminaire.The light colour and light output of BEGAreplacement modules correspond to those ofthe modules originally fitted.The module can be replaced by qualified persons using standard tools. Disconnect the system and open the luminaire. Please follow the installation instructions for the LED module. Inspect and, if necessary, replace the luminaire gaskets. The defective glass must be replaced. Close the luminaire.