denver LBF-404 Wi-Fi Filament Light Bulb Warm Light User Manual

June 14, 2024
Denver

denver LBF-404 Wi-Fi Filament Light Bulb Warm Light

denver-LBF-404-Wi-Fi-Filament-Light-Bulb-Warm-Light-
PRODUCT

Denver Smart Home

denver-LBF-404-Wi-Fi-Filament-Light-Bulb-Warm-Light-
FIG- \(1\) denver-LBF-404-Wi-Fi-
Filament-Light-Bulb-Warm-Light-FIG- \(2\)

Lighting product instructions for using the Universal Edition Denver Smart Home App

Safety information
Please read the safety instructions carefully before using the product for the first time and keep the instructions for future reference.

  1. Keep products out of the reach of children and pets.
  2. Make sure the power switch control is turned off before installing or uninstalling.
  3. The use of the product is intended for indoor and dry conditions.
  4. Handle the product carefully. The tile product is fragile. It can break easily if dropped to the floor.
  5. Never open the product. Repairs or services should only be performed by qualified personnel. Touching the inside electrics can cause electric shock if collected to power.
  6. Do not use cleaning solvents or abrasives. Only use soft a cloth for outside cleaning of the device. Do not clean when collected to power. Disconnect the bulb first before cleaning.
  7. When the bulb is turned on, it will become hot as light is emitted. To avoid burning your hands, do not touch the bulb immediately after turning off the power.

Preparation for use

  1. Power on the lamp while ensuring that your smartphone is connected to the 2.4 GHz Wi-Fi network;
  2. Download and open the app
  3. Search for”Denver Smart Home” in the App Store or scan the QR code below or on the package to download and install the app.
  4. Tap the”Register” button to register if you download it for the first time. If you already have an account, tap the”Login” button

Device Network configuration

  1. Open the Denver Smart Home app and access the”Devices” page. Tap the”+” mark in the upper right corner of the page.
  2. Select”Lighting devices” on the device list page.
  3. Two configuration modes are available for connection: EZ mode and AP mode.

EZ Mode
Ensure the light flashes quickly (twice a second). This indicates that the lamp is in configuration mode. Press the lamp switch 3 times (on-off-on-off- on) until the light flashes quickly. Tap the “Confirm light blinks rapidly” button on the “Add Device” page to start the connection.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.
Please notice – All products are subject to change without any notice. We take reservations for errors and omissions in the manual.

ALL RIGHTS RESERVED, COPYRIGHT DENVER A/S
denver.eu

  • Electric and electronic equipment contains materials, components, and substances that can be hazardous to your health and the environment if the waste material ( discarded electric and electronic equipment) is not handled properly.
  • Electric and electronic equipment is marked with the crossed-out trash can symbol, seen above. This symbol signifies that electronic and electronic equipment should not be disposed of with other household waste, but should be disposed of separately.
  • All cities have established collection points, where electric and election-one equipment can either be submitted free of charge at recycling stations and other collection sites or be collected from households. Additional information is available at the technical department of your city.
  • Hereby, Denver A/S declares that the radio equipment type LBF-404 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: denver.eu then click the search ICON on the top line of the website. Write model number:
  • LBF-404. Now enter the product page, and the RED directive is found under downloads/other downloads.

Operating Frequency Range: 50/60Hz
Max Output Power: 4.9W
DENVER A/S
Omega 5A, Soeften
DK-8382 Hinnerup
Denmark
www.facebook.com/denver.eu

Contact

Nordics
Headquarters Denver NS Omega SA, Soeften DK-8382 Hinnerup Denmark
(Push 1″ for support)
E-Mail: For all other questions please write to: contact.hq@denver.eu

Spain/Portugal
DENVER SPAIN S.A
Ronda Augustes y Louis Lumiere, n° 23 – nave 16 Parque Tecnol6gico 46980 PATERNA Valencia {Spain) Spain
Phone: +34 960 046 883
Mail: support.es@denver.ou
Portugal:
E-Mail: denver.service@satfiel.com

If your country is not listed above, please write an email to support@denver.eu

DENVER NS Omega SA, Soeften
DK-8382 Hinnerup Denmark denver.eu
facebook.com/denver.eu

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals